Vendor: Memotec Communications
Module: CONV-MIB
[Automatically extracted from oidview.com]
cxFwkCircuitEntry OBJECT-TYPE SYNTAX CxFwkCircuitEntry ACCESS not-accessible STATUS mandatory INDEX { cxFwkCircuitPort } ::= { cxFwkCircuitTable 1 }
cxFwkCircuitEntry OBJECT-TYPE SYNTAX CxFwkCircuitEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { cxFwkCircuitPort } ::= { cxFwkCircuitTable 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.495.2.1.6.8.2.1.1 | cxFwkCircuitPort | 0 | 0 | Identifies the convergence port by a unique index number. This number acts as an index for this and the cxConvTable. Range of Val… |
| 1.3.6.1.4.1.495.2.1.6.8.2.1.2 | cxFwkCircuitState | 0 | 0 | Identifies the current state of the circuit between the convergence port and the destination port. Options: opened (1): The circui… |
| 1.3.6.1.4.1.495.2.1.6.8.2.1.3 | cxFwkCircuitRowStatus | 0 | 0 | Determines the status of the objects in a table row. Options: invalid (1): row is flagged, after next reset the values will be di… |
| 1.3.6.1.4.1.495.2.1.6.8.2.1.4 | cxFwkServiceType | 0 | 0 | Determines the WAN service used. At the present time, frame relay is the only WAN service available. Options: frameRelay (1) notSpe… |
| 1.3.6.1.4.1.495.2.1.6.8.2.1.5 | cxFwkServiceProtocol | 0 | 0 | Identifies the type of connection the WAN service uses. At the present time, Permanent Virtual Circuit (PVC) is the only type of… |
| 1.3.6.1.4.1.495.2.1.6.8.2.1.6 | cxFwkServiceName | 0 | 0 | Identifies the textual name of the WAN service used. The system updates the name automatically when it selects a WAN service for… |
| 1.3.6.1.4.1.495.2.1.6.8.2.1.7 | cxFwkDestAddress | 0 | 0 | Identifies the address used to reach the WAN service provider. Range of Values: 20 octets, each octet ranging from 00 to FF. Defa… |
| 1.3.6.1.4.1.495.2.1.6.8.2.1.8 | cxFwkDestAlias | 0 | 0 | Determines a unique textual name (assigned by a network administrator) identifying the destination frame relay circuit. Range of … |
| 1.3.6.1.4.1.495.2.1.6.8.2.1.9 | cxFwkServiceCircuitMdu | 0 | 0 | Determines the maximum size of the data unit (in octets) that may be transmitted over the WAN circuit. Range of Values: 0 to 8192… |
| 1.3.6.1.4.1.495.2.1.6.8.2.1.10 | cxFwkServiceCost | 0 | 0 | Determines the cost of the WAN service. Cost is typically inverse to the throughput. The smaller the number, the greater the thr… |
| 1.3.6.1.4.1.495.2.1.6.8.2.1.11 | cxFwkServiceCardId | 0 | 0 | Identifies the number of the chassis slot that contains the WAN service (FR600). This object is not applicable in the CX900 arch… |
| 1.3.6.1.4.1.495.2.1.6.8.2.1.12 | cxFwkServiceSapId | 0 | 0 | Identifies the ID of the WAN service's SAP (service access point) that the convergence port uses to establish the circuit. This … |
| 1.3.6.1.4.1.495.2.1.6.8.2.1.13 | cxFwkServiceRouteRef | 0 | 0 | Determines a routing reference number. This number provides a reference for WAN service providers that offer multiplexing (it is… |
| 1.3.6.1.4.1.495.2.1.6.8.2.1.15 | cxFwkStatsInternalErrors | 0 | 0 | Identifies the number of internal errors recognized by the convergence port. Range of Values: 1 to 4, 294, 967, 295 Default Value… |
| 1.3.6.1.4.1.495.2.1.6.8.2.1.16 | cxFwkStatsRegistrationErrors | 0 | 0 | Identifies the number of errors that occurred when the convergence port attempted to register itself to the framework. Range of V… |
| 1.3.6.1.4.1.495.2.1.6.8.2.1.17 | cxFwkStatsQueryErrors | 0 | 0 | Identifies the number of times the convergence port requested a service that was not available. Range of Values: 1 to 4, 294, 967… |
| 1.3.6.1.4.1.495.2.1.6.8.2.1.18 | cxFwkStatsOpenErrors | 0 | 0 | Identifies the number of errors that occurred when the convergence port attempted to establish a connection with a WAN service. … |
| 1.3.6.1.4.1.495.2.1.6.8.2.1.19 | cxFwkStatsResets | 0 | 0 | Identifies the number of resets received from the WAN service. A large value here may signify a breakdown on the bus or the WAN … |