A listing of GDC VFAST modem options.
Parsed from file vfast.mib.txt
Company: None
Module: GDCMDM-MIB
A listing of GDC VFAST modem options.
Parsed from file GDCMDM-MIB.mib
Module: GDCMDM-MIB
mdmModemEntry OBJECT-TYPE SYNTAX MdmModemEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A listing of GDC VFAST modem options." INDEX {mdmModemIndex} ::= { mdmModemConfigTable 1 }
Vendor: General DataComm, Inc.
Module: GDCMDM-MIB
[Automatically extracted from oidview.com]
mdmModemEntry OBJECT-TYPE SYNTAX MdmModemEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A listing of GDC VFAST modem options." INDEX {mdmModemIndex} ::= { mdmModemConfigTable 1 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.498.4.3.1.1 | mdmModemIndex | 0 | 0 | A unique index for the Modem Option Table. |
1.3.6.1.4.1.498.4.3.1.2 | mdmRingsToAns | 0 | 0 | Selects the number of rings received before the modem Auto Answer. This object is Country Code dependent |
1.3.6.1.4.1.498.4.3.1.3 | mdmFallFwrdBack | 0 | 0 | Command the modem to enable/disable rate negotiation during a retrain. |
1.3.6.1.4.1.498.4.3.1.4 | mdmTrellis | 0 | 0 | Enable/disable Trellis negotiation during a handshake. |
1.3.6.1.4.1.498.4.3.1.5 | mdmSQRetrain | 0 | 0 | Command to option Signal Quality Retrains. |
1.3.6.1.4.1.498.4.3.1.6 | mdmLongSpaceDisc | 0 | 0 | Command to enable/disable Long Space Disconnect. enable The modem will transmit 4 seconds of continuous space (BREAK) when ever … |
1.3.6.1.4.1.498.4.3.1.7 | mdmMakeBusy | 0 | 0 | Command to option the switched network make busy function disable Does not make busy. onLossDTR Make busy on loss of D… |
1.3.6.1.4.1.498.4.3.1.8 | mdmRDLOptions | 0 | 0 | Command to enable/disable Remote Digital Loopback Instigation. disable The modem ignores the inband request to initiate a r… |
1.3.6.1.4.1.498.4.3.1.9 | mdmTestTimer | 0 | 0 | Command to limit any diagnostic test in 10 second intervals. When the value is zero the test runs forever. |
1.3.6.1.4.1.498.4.3.1.10 | mdmDTETestCntrl | 0 | 0 | Command to enable/disable diagnostic tests from DTE interface. |
1.3.6.1.4.1.498.4.3.1.11 | mdmDCDLossDisc | 0 | 0 | Command to set the time (0.1sec) between loss of carrier detected and a modem disconnect. This object is Country Code dependent. |
1.3.6.1.4.1.498.4.3.1.12 | mdmCDRespTime | 0 | 0 | Command to set the time (in Sec) a carrier signal must be present for the modem to recognize it. This object is Country Code depe… |
1.3.6.1.4.1.498.4.3.1.13 | mdmAnswerOriginate | 0 | 0 | Command to set the handshake band. answerIfRingDetect Upon detecting a ring the modem will handshake in the answer mode. forc… |
1.3.6.1.4.1.498.4.3.1.14 | mdmWaitForDCD | 0 | 0 | This object is used to store the carrier wait time. This is the time which the modem will wait after the dial has been completed … |
1.3.6.1.4.1.498.4.3.1.15 | mdmDCERateLimit | 0 | 0 | This object allows the user to set the maximum DCE rate the modem can connect at within the modulation schemes: V.32, V.32bis and… |
1.3.6.1.4.1.498.4.3.1.16 | mdmDTEInactivityDisconnect | 0 | 0 | Select the duration of DTE inactivity for automatic disconnection. Units are in minutes. A value of 0 disables this option. |
1.3.6.1.4.1.498.4.3.1.17 | mdmAsymmetricDCE | 0 | 0 | Asymetric DCE rates feature enable. disable(1): normal DCE Rx = DCE Tx enable(2): Asymmetrical DCE Rx and DCE Tx may be differe… |
1.3.6.1.4.1.498.4.3.1.18 | mdmPCMDCERateLimit | 0 | 0 | This object allows the user to set the maximum PCM DCE Rate the modem can connect at within the modulation scheme for V.90 |
1.3.6.1.4.1.498.4.3.1.19 | mdmISDNprotocol | 0 | 0 | This object allows the user to set the ISDN protocol. |
1.3.6.1.4.1.498.4.3.1.20 | mdmISDNcallerIDStatus | 0 | 0 | This object allows the user to enable/disable ISDN caller ID. |