The bandwidth of the circuit in kilobits per second.
Parsed from file accDs1.my.txt
Company: None
Module: ACC-DS1
The bandwidth of the circuit in kilobits per second.
Parsed from file ACC-DS1.mib
Module: ACC-DS1
Vendor: ACC
Module: ACC-DS1
[Automatically extracted from oidview.com]
accDs1CircuitBandwidth OBJECT-TYPE SYNTAX INTEGER { bandwidth-8 (1), bandwidth-16 (2), bandwidth-24 (3), bandwidth-32 (4), bandwidth-40 (5), bandwidth-48 (6), bandwidth-56 (7), bandwidth-64 (8) } ACCESS read-write STATUS mandatory DESCRIPTION " The bandwidth of the circuit in kilobits per second." ::= { accDs1CircuitEntry 3 }
accDs1CircuitBandwidth OBJECT-TYPE SYNTAX INTEGER { bandwidth-8 (1), bandwidth-16 (2), bandwidth-24 (3), bandwidth-32 (4), bandwidth-40 (5), bandwidth-48 (6), bandwidth-56 (7), bandwidth-64 (8) } ACCESS read-write STATUS mandatory DESCRIPTION " The bandwidth of the circuit in kilobits per second." ::= { accDs1CircuitEntry 3 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.5.1.1.43.1.1 | accDs1CircuitIndex | 0 | 0 | This object is the identifier of a circuit on a managed DS1 interface. It should have the same value as ifIndex. |
1.3.6.1.4.1.5.1.1.43.1.2 | accDs1CircuitAdi | 0 | 0 | Enables or disables alternate digit inversion for a circuit on a managed DS1 interface. This object applies only to E1 interface… |
1.3.6.1.4.1.5.1.1.43.1.4 | accDs1CircuitBusyout | 0 | 0 | The busyout status of a circuit. If the status is set to busy, the circuit is taken out of service and is unable to carry user d… |
1.3.6.1.4.1.5.1.1.43.1.5 | accDs1CircuitInversion | 0 | 0 | Enables or disables circuit inversion for a circuit on a managed DS1 interface. This object applies only to T1 interfaces. |
1.3.6.1.4.1.5.1.1.43.1.6 | accDs1CircuitName | 0 | 0 | This object is used to associate a name with a particular DS1 circuit. |
1.3.6.1.4.1.5.1.1.43.1.7 | accDs1CircuitConfigStatus | 0 | 0 | This object gives the configuration status for a circuit entry, and may have the following values: UNCONFIG The circuit has not b… |
1.3.6.1.4.1.5.1.1.43.1.8 | accDs1CircuitLoopback | 0 | 0 | This object represents the loopback status of the DS1 circuit. Any active loopback can be removed by setting the loopback status… |
1.3.6.1.4.1.5.1.1.43.1.9 | accDs1CircuitRbs | 0 | 0 | Enables or disables robbed bit signaling for a circuit on a managed DS1 interface. This object applies only to T1 interfaces. |
1.3.6.1.4.1.5.1.1.43.1.10 | accDs1CircuitSuperrateMask | 0 | 0 | Specifies the time-slots used by a superrate circuit. Each bit which is set corresponds to a time-slot which is allocated to the… |