Maximum inbound signaling response duration
for R2 signaling.
Parsed from file mib_txt_12_3_1_5.txt
Company: None
Module: ACC-MIB
Maximum inbound signaling response duration
for R2 signaling.
Parsed from file ACC-PSTN.mib
Module: ACC-PSTN
Vendor: ACC
Module: ACC-PSTN
[Automatically extracted from oidview.com]
accPstnTabSigR2RspInDur OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory ::= { accR2Sigo 14 }
accPstnTabSigR2RspInDur OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION " Maximum inbound signaling response duration for R2 signaling." ::= { accR2Sigo 14 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.5.1.1.69.8.3.3.1.1.14.0 | accPstnTabSigR2RspInDur | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.5.1.1.69.8.3.3.1.1.1 | accPstnTabSigR2CdDig | 1 | 1 | Number of called digits to request for an R2 signaling call. |
| 1.3.6.1.4.1.5.1.1.69.8.3.3.1.1.2 | accPstnTabSigR2CnDig | 1 | 1 | Number of calling digits to request for an R2 signaling call. |
| 1.3.6.1.4.1.5.1.1.69.8.3.3.1.1.3 | accPstnTabSigR2ReqCpc | 1 | 1 | This object holds the calling party category. |
| 1.3.6.1.4.1.5.1.1.69.8.3.3.1.1.4 | accPstnTabSigR2AdMo | 1 | 1 | Group table to use for address termination. |
| 1.3.6.1.4.1.5.1.1.69.8.3.3.1.1.5 | accPstnTabSigR2CdInMode | 1 | 1 | Defines the method used to signal a stop after receiving the called number digits. |
| 1.3.6.1.4.1.5.1.1.69.8.3.3.1.1.6 | accPstnTabSigR2CdOutMode | 1 | 1 | Defines the method used to signal a stop after sending the called number digits. |
| 1.3.6.1.4.1.5.1.1.69.8.3.3.1.1.7 | accPstnTabSigR2CnInMode | 1 | 1 | Defines the method used to signal a stop after receiving the calling number digits. |
| 1.3.6.1.4.1.5.1.1.69.8.3.3.1.1.8 | accPstnTabSigR2CnOutMode | 1 | 1 | Defines the mode used to stop sending the calling number digits. |
| 1.3.6.1.4.1.5.1.1.69.8.3.3.1.1.9 | accPstnTabSigR2RspInMode | 1 | 1 | Mode used for inbound call signaling (compelled, semi-compelled, none). |
| 1.3.6.1.4.1.5.1.1.69.8.3.3.1.1.10 | accPstnTabSigR2RspOutMode | 1 | 1 | Mode used for outbound call signaling (compelled, semi-compelled, none). |
| 1.3.6.1.4.1.5.1.1.69.8.3.3.1.1.11 | accPstnTabSigR2ObCpc | 1 | 1 | Calling party category used for outbound calls. |
| 1.3.6.1.4.1.5.1.1.69.8.3.3.1.1.12 | accPstnTabSigR2ObDflt | 1 | 1 | Called number used for outbound calls. |
| 1.3.6.1.4.1.5.1.1.69.8.3.3.1.1.13 | accPstnTabSigR2ScDur | 1 | 1 | Holds the semi-compelled tone duration, used in either direction (inbound, outbound). |
| 1.3.6.1.4.1.5.1.1.69.8.3.3.1.1.15 | accPstnTabSigR2RspOutDur | 1 | 1 | Maximum outbound signaling response duration for R2 signaling. |
| 1.3.6.1.4.1.5.1.1.69.8.3.3.1.1.16 | accPstnTabSigR2InDur | 1 | 1 | Signaling timeout for inbound R2 calls. |
| 1.3.6.1.4.1.5.1.1.69.8.3.3.1.1.17 | accPstnTabSigR2OutDur | 1 | 1 | Signaling timeout for outbound R2 calls. |
| 1.3.6.1.4.1.5.1.1.69.8.3.3.1.1.18 | accPstnTabSigR2InHiPwr | 1 | 1 | High frequency tonepower setting for incoming calls. |
| 1.3.6.1.4.1.5.1.1.69.8.3.3.1.1.19 | accPstnTabSigR2InLoPwr | 1 | 1 | Low frequency tonepower setting for incoming calls. |
| 1.3.6.1.4.1.5.1.1.69.8.3.3.1.1.20 | accPstnTabSigR2OutHiPwr | 1 | 1 | High frequency tone power setting for outbound calls. |
| 1.3.6.1.4.1.5.1.1.69.8.3.3.1.1.21 | accPstnTabSigR2OutLoPwr | 1 | 1 | Low frequency tone power setting for outbound calls. |
| 1.3.6.1.4.1.5.1.1.69.8.3.3.1.1.22 | accPstnTableInt | 1 | 1 | TBLSET currently in use. |