Vendor: ACC
Module: ACC-L2TP
[Automatically extracted from oidview.com]
accL2tpGeneralScalars OBJECT IDENTIFIER ::= { accL2tpGeneral 1 }
accL2tpGeneralScalars OBJECT IDENTIFIER ::= { accL2tpGeneral 1 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.5.1.1.71.1.1.1 | accL2tpVendorName | 1 | 1 | Vendor Name |
1.3.6.1.4.1.5.1.1.71.1.1.2 | accL2tpFirmwareRev | 1 | 1 | Firmware Revision |
1.3.6.1.4.1.5.1.1.71.1.1.3 | accL2pAdminState | 1 | 1 | L2TP Adminstrative state. |
1.3.6.1.4.1.5.1.1.71.1.1.4 | accL2tpProtocolVersion | 1 | 1 | L2TP Protocol Version |
1.3.6.1.4.1.5.1.1.71.1.1.5 | accL2tpControlRWS | 1 | 1 | Default Control Window Size adopted by Dynamically created L2TP Tunnels |
1.3.6.1.4.1.5.1.1.71.1.1.6 | accL2tpPayloadSeq | 1 | 1 | If set to ON, the remote peer will wait for an acknowledgement after sending Payload RWS messages |
1.3.6.1.4.1.5.1.1.71.1.1.7 | accL2tpPayloadRWS | 1 | 1 | When Payload Sequencing is set to YES, the remote peer will wait for an acknowledgement after sending this many messages |
1.3.6.1.4.1.5.1.1.71.1.1.8 | accL2tpKeepAlive | 1 | 1 | Default Hello control message interval |
1.3.6.1.4.1.5.1.1.71.1.1.9 | accL2tpMaxAckTimeout | 1 | 1 | Timeout interval for both Control and Payload acknowledgements |
1.3.6.1.4.1.5.1.1.71.1.1.10 | accL2tpMaxRetrans | 1 | 1 | Maximum number of Retransmissions before assuming a peer is not responding. |
1.3.6.1.4.1.5.1.1.71.1.1.11 | accL2tpIdleDisconnect | 1 | 1 | Interval in which to wait after the last payload session within the tunnel disconnects before tearing down the tunnel itself |
1.3.6.1.4.1.5.1.1.71.1.1.12 | accL2tpTunnelAuthentication | 1 | 1 | Default sevurity method for dynamically created L2TP Tunnels |
1.3.6.1.4.1.5.1.1.71.1.1.13 | accL2tpKeyDistribution | 1 | 1 | Method to obtain it's secrets for the specified security method |
1.3.6.1.4.1.5.1.1.71.1.1.14 | accL2tpProxyAuthentication | 1 | 1 | Causes the L2TP protocol to ignore the proxy authentication information obtained by the L2TP access concentrator (LAC) if the pro… |
1.3.6.1.4.1.5.1.1.71.1.1.15 | accL2tpServerState | 1 | 1 | Enables or disables L2TP UDP Transport Server. |
1.3.6.1.4.1.5.1.1.71.1.1.16 | accL2tpMessageLevel | 1 | 1 | L2TP Message Level |
1.3.6.1.4.1.5.1.1.71.1.1.17 | accL2tpDebugMask | 1 | 1 | Set in conjunction with L2TP Message Level to filter out messages |
1.3.6.1.4.1.5.1.1.71.1.1.18 | accL2tpPayLoadLength | 1 | 1 | Used to configure the L2TP default action regarding payload lengths |
1.3.6.1.4.1.5.1.1.71.1.1.19 | accL2tpAttributeHiding | 1 | 1 | Configures the way that L2TP handles attribute value pairs (AVPs). Enabling this option causes L2TP to 'hide' AVPs typically con… |
1.3.6.1.4.1.5.1.1.71.1.1.20 | accL2tpCallConfirm | 1 | 1 | Configures the Call Confirm operation on L2TP LAC. When enabled it causes the LAC to verify that the LNS will proceed with a pa… |
1.3.6.1.4.1.5.1.1.71.1.1.21 | accL2tpMaxAggressiveAckTimeout | 1 | 1 | None |
1.3.6.1.4.1.5.1.1.71.1.1.22 | accL2tpMaxAggressiveRetrans | 1 | 1 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.5.1.1.71.1.2 | accL2tpTunnelConfigTable | 1 | 22 | Displays all L2TP Tunnel entries configured on the system |
1.3.6.1.4.1.5.1.1.71.1.3 | accL2tpTunnelStatusTable | 1 | 37 | Displays status of all L2TP Tunnel entries Configured on the system |
1.3.6.1.4.1.5.1.1.71.1.5 | accL2tpSessionTable | 1 | 20 | Displays all L2TP Tunnel entries configured on the system |
1.3.6.1.4.1.5.1.1.71.1.6 | accL2tpSessionStatusTable | 1 | 20 | Displays all L2TP Tunnel entries configured on the system |
1.3.6.1.4.1.5.1.1.71.1.7 | accL2tpEndpointDomainTable | 1 | 5 | Displays all L2TP Tunnel entries configured on the system |