Enable for the Beacon Isolation Algorithm.
When this variable is set to enable, then
if the ring beacons and is unable to recover
itself, the MAU will execute the Beacon
Isolation Algorithm. This algorithm will
attempt to isolate the problem in the ring to
a single port. This algorithm should
ONLY be enabled if all MAU's in the ring are
ODS MAU's with in-band agents that also have
enbBcnIsoAlg set to enable. NOTE: this should
be set to disable for all MAU's in the ring
if any of the in-band agents has control of
an MAU that has multiple rings.
Parsed from file odstr_mib.txt
Company: ods
Module: ODS-TRMIB
enbBcnIsoAlg OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2), } ACCESS read-write STATUS mandatory DESCRIPTION "Enable for the Beacon Isolation Algorithm. When this variable is set to enable, then if the ring beacons and is unable to recover itself, the MAU will execute the Beacon Isolation Algorithm. This algorithm will attempt to isolate the problem in the ring to a single port. This algorithm should ONLY be enabled if all MAU's in the ring are ODS MAU's with in-band agents that also have enbBcnIsoAlg set to enable. NOTE: this should be set to disable for all MAU's in the ring if any of the in-band agents has control of an MAU that has multiple rings." ::= { trBox 16 }
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.50.3.1.1.1.16.0 | enbBcnIsoAlg | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.50.3.1.1.1.1 | boxChassisId | 1 | 1 | The type of chassis used for the concentrator. For modular concentrators, the hardware is further qualifed by the value of cardId… |
| 1.3.6.1.4.1.50.3.1.1.1.4 | boxMaxDeinCount | 1 | 1 | Contains the maximum number of successive de-inserts that can occur before a given port is shut off automatically. |
| 1.3.6.1.4.1.50.3.1.1.1.5 | boxMaxDeinDelta | 1 | 1 | The maximum time in seconds between successive de-inserts for a given port for which the portDeinCount will be incremeneted. |
| 1.3.6.1.4.1.50.3.1.1.1.7 | boxReset | 1 | 1 | Setting to 1 will reboot the agent. |
| 1.3.6.1.4.1.50.3.1.1.1.8 | boxFWVersion | 1 | 1 | The version of the firmware that is currently resident. |
| 1.3.6.1.4.1.50.3.1.1.1.9 | trapId | 1 | 1 | The trap Id for this particular trap. It is a one-up counter that identifies this trap. |
| 1.3.6.1.4.1.50.3.1.1.1.10 | changedOid | 1 | 1 | The Object Id of the variable that is the reason for sending the trap. |
| 1.3.6.1.4.1.50.3.1.1.1.11 | changedValue | 1 | 1 | The value of the variable that is being trapped. |
| 1.3.6.1.4.1.50.3.1.1.1.12 | changedDescr | 1 | 1 | A textual description of the variable, the slot, the port, and the new value that is being trapped. |
| 1.3.6.1.4.1.50.3.1.1.1.13 | tftpAddress | 1 | 1 | The IP address from which TFTP packets will be accepted by the agent. |
| 1.3.6.1.4.1.50.3.1.1.1.14 | dosCommand | 1 | 1 | A Dos command that will be executed. |
| 1.3.6.1.4.1.50.3.1.1.1.15 | dosExitCode | 1 | 1 | The status of the last executed DOS command. |