This object defines the mode of the board. In Auto Mode, the
board is using its hardware defaults. The default values of the
board are all ports enabled, speed selected by the HW jumper on
the board, the FNB attempts to attach left and right and not
bypassed, ring port phantom current (if applicable) is controlled
via a HW switch, and selectable media (if applicable) is managed
also via a HW switch. In Management Mode, the hardware defaults
may be overridden by network or local management. If the mode
of the board is indeterminate, such as an Ethernet MIM, then the
value unknown is returned. A write to this object will place the
board into either management or auto mode, provided this MIM falls
within the domain of the device. If the MIM falls outside of the
domain of the device, the SNMP error BadValue will be returned. A
write request with the value unknown also returns the SNMP error
BadValue.
Parsed from file dot5-phys-mib.mib.txt
Company: None
Module: DOT5-PHYS-MIB
This object defines the mode of the board. In Auto Mode, the
board is using its hardware defaults. The default values of the
board are all ports enabled, speed selected by the HW jumper on
the board, the FNB attempts to attach left and right and not
bypassed, ring port phantom current (if applicable) is controlled
via a HW switch, and selectable media (if applicable) is managed
also via a HW switch. In Management Mode, the hardware defaults
may be overridden by network or local management. If the mode
of the board is indeterminate, such as an Ethernet MIM, then the
value unknown is returned. A write to this object will place the
board into either management or auto mode, provided this MIM falls
within the domain of the device. If the MIM falls outside of the
domain of the device, the SNMP error BadValue will be returned. A
write request with the value unknown also returns the SNMP error
BadValue.
Parsed from file DOT5-PHYS-MIB.mib
Module: DOT5-PHYS-MIB
dot5PhysMgmtBoardMode OBJECT-TYPE SYNTAX INTEGER { managementMode(1), autoMode(2), unknown(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This object defines the mode of the board. In Auto Mode, the board is using its hardware defaults. The default values of the board are all ports enabled, speed selected by the HW jumper on the board, the FNB attempts to attach left and right and not bypassed, ring port phantom current (if applicable) is controlled via a HW switch, and selectable media (if applicable) is managed also via a HW switch. In Management Mode, the hardware defaults may be overridden by network or local management. If the mode of the board is indeterminate, such as an Ethernet MIM, then the value unknown is returned. A write to this object will place the board into either management or auto mode, provided this MIM falls within the domain of the device. If the MIM falls outside of the domain of the device, the SNMP error BadValue will be returned. A write request with the value unknown also returns the SNMP error BadValue." ::= { dot5PhysMgmtBoardEntry 15 }
Vendor: Enterasys Networks Inc.
Module: DOT5-PHYS-MIB
[Automatically extracted from oidview.com]
dot5PhysMgmtBoardMode OBJECT-TYPE SYNTAX INTEGER { managementMode(1), autoMode(2), unknown(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This object defines the mode of the board. In Auto Mode, the board is using its hardware defaults. The default values of the board are all ports enabled, speed selected by the HW jumper on the board, the FNB attempts to attach left and right and not bypassed, ring port phantom current (if applicable) is controlled via a HW switch, and selectable media (if applicable) is managed also via a HW switch. In Management Mode, the hardware defaults may be overridden by network or local management. If the mode of the board is indeterminate, such as an Ethernet MIM, then the value unknown is returned. A write to this object will place the board into either management or auto mode, provided this MIM falls within the domain of the device. If the MIM falls outside of the domain of the device, the SNMP error BadValue will be returned. A write request with the value unknown also returns the SNMP error BadValue." ::= { dot5PhysMgmtBoardEntry 15 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.52.4.1.1.6.1.2.1.1.1 | dot5PhysMgmtBoardId | 0 | 0 | Returns an index to a MIM board for which the information in this table pertains. |
| 1.3.6.1.4.1.52.4.1.1.6.1.2.1.1.2 | dot5PhysMgmtBoardDomain | 0 | 0 | Returns an indication of the manageability of this MIM by the device being addressed. If the value outsideDomain is returned, th… |
| 1.3.6.1.4.1.52.4.1.1.6.1.2.1.1.3 | dot5PhysMgmtBoardName | 0 | 0 | The ASCII name assigned to this MIM board. This name defaults to 'Board n', where n is a unique integer value from 1 to n which … |
| 1.3.6.1.4.1.52.4.1.1.6.1.2.1.1.4 | dot5PhysMgmtBoardDesc | 0 | 0 | An ASCII string which describes this type of MIM board. For example, an MT8MIM would be described as 'MT8MIM' and a TRRMIM-2A wo… |
| 1.3.6.1.4.1.52.4.1.1.6.1.2.1.1.5 | dot5PhysMgmtBoardDot5PortCount | 0 | 0 | Returns the total number of token ring ports contained on the board. This count does not include unpopulated TPIM slots. If this… |
| 1.3.6.1.4.1.52.4.1.1.6.1.2.1.1.6 | dot5PhysMgmtBoardDot5PortsEnable | 0 | 0 | Setting this object to enable will cause all the token ring ports residing on this MIM board to be enabled, provided this MIM fal… |
| 1.3.6.1.4.1.52.4.1.1.6.1.2.1.1.7 | dot5PhysMgmtBoardDot5PortsOn | 0 | 0 | Returns the total number of administratively enabled token ring ports residing on this MIM board. If this MIM falls outside of t… |
| 1.3.6.1.4.1.52.4.1.1.6.1.2.1.1.8 | dot5PhysMgmtBoardDot5PortsOper | 0 | 0 | Returns the total number of operational token ring ports residing on this MIM board. If this MIM falls outside of the domain of … |
| 1.3.6.1.4.1.52.4.1.1.6.1.2.1.1.9 | dot5PhysMgmtBoardDot5StnPortCount | 0 | 0 | Returns the total number of token ring station ports contained on the board. If this MIM falls outside of the domain of the mana… |
| 1.3.6.1.4.1.52.4.1.1.6.1.2.1.1.10 | dot5PhysMgmtBoardDot5StnPortsEnable | 0 | 0 | Setting this object to enable will cause all the token ring station ports residing on this MIM board to be enabled, provided this… |
| 1.3.6.1.4.1.52.4.1.1.6.1.2.1.1.11 | dot5PhysMgmtBoardDot5StnPortsOn | 0 | 0 | Returns the total number of adminstratively enabled token ring station ports residing on this MIM board. If this MIM falls outsi… |
| 1.3.6.1.4.1.52.4.1.1.6.1.2.1.1.12 | dot5PhysMgmtBoardDot5RingPortCount | 0 | 0 | Returns the total number of token ring ring in/ring out ports contained on the board. This count does not include unpopulated TP… |
| 1.3.6.1.4.1.52.4.1.1.6.1.2.1.1.13 | dot5PhysMgmtBoardDot5RingPortsEnable | 0 | 0 | Setting this object to enable will cause all the token ring ring in/ring out ports residing on this MIM board to be enabled, prov… |
| 1.3.6.1.4.1.52.4.1.1.6.1.2.1.1.14 | dot5PhysMgmtBoardDot5RingPortsOn | 0 | 0 | Returns the total number of adminstratively enabled token ring ring in/ring out ports residing on this MIM board. If this MIM fal… |
| 1.3.6.1.4.1.52.4.1.1.6.1.2.1.1.16 | dot5PhysMgmtBoardSpeed | 0 | 0 | This object sets the data speed of the board. On devices with a MAC interface, on MIM boards in which the data speed cannot be s… |
| 1.3.6.1.4.1.52.4.1.1.6.1.2.1.1.17 | dot5PhysMgmtBoardSpeedFault | 0 | 0 | This object reports a ring speed fault on a MIM board, if applicable. If the MIM cannot detect speed faults, such as an Ethernet… |
| 1.3.6.1.4.1.52.4.1.1.6.1.2.1.1.18 | dot5PhysMgmtBoardSpeedFaultLocation | 0 | 0 | This object indicates the last ring speed fault detection circuit(s) to detect the fault, if there was one. On MIM boards which… |
| 1.3.6.1.4.1.52.4.1.1.6.1.2.1.1.19 | dot5PhysMgmtBoardPortAssociation | 0 | 0 | This object, when written, would associate all of the ports on the board with the selected ring, provided this option is availab… |
| 1.3.6.1.4.1.52.4.1.1.6.1.2.1.1.20 | dot5PhysMgmtBoardPortAssociationChanges | 0 | 0 | This object is incremented every time the port association changes for a token ring port residing on this MIM board. If this MI… |