Setting this object to enable will cause all the ring in/out ports
on the ring which may be controlled by this device to be
enabled. Setting this object to noEnable will have no effect.
When read this object will always return noEnable.
Parsed from file dot5-mib.mib.txt
Company: None
Module: DOT5-LOG-MIB
Setting this object to enable will cause all the ring in/out ports
on the ring which may be controlled by this device to be
enabled. Setting this object to noEnable will have no effect.
When read this object will always return noEnable.
Parsed from file DOT5-LOG-MIB.mib
Module: DOT5-LOG-MIB
tRingMgmtRingPortsEnable OBJECT-TYPE SYNTAX INTEGER { noEnable(1), enable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Setting this object to enable will cause all the ring in/out ports on the ring which may be controlled by this device to be enabled. Setting this object to noEnable will have no effect. When read this object will always return noEnable." ::= { tRingMgmtRing 5 }
Vendor: Enterasys Networks Inc.
Module: DOT5-LOG-MIB
[Automatically extracted from oidview.com]
tRingMgmtRingPortsEnable OBJECT-TYPE SYNTAX INTEGER { noEnable(1), enable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Setting this object to enable will cause all the ring in/out ports on the ring which may be controlled by this device to be enabled. Setting this object to noEnable will have no effect. When read this object will always return noEnable." ::= { tRingMgmtRing 5 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.52.4.1.2.1.1.1.1.1.5.0 | tRingMgmtRingPortsEnable | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.52.4.1.2.1.1.1.1.1.1 | tRingMgmtRingName | 1 | 1 | The ASCII name assigned to this ring. This name defaults to 'Network n', where n is a unique integer value from 1 to n. |
| 1.3.6.1.4.1.52.4.1.2.1.1.1.1.1.2 | tRingMgmtStnPortCount | 1 | 1 | Returns the total number of physical ports on this ring which may be controlled by this device. |
| 1.3.6.1.4.1.52.4.1.2.1.1.1.1.1.3 | tRingMgmtRingPortCount | 1 | 1 | Returns the total number of ring in/out ports on this ring which may be controlled by this device. |
| 1.3.6.1.4.1.52.4.1.2.1.1.1.1.1.4 | tRingMgmtStnPortsEnable | 1 | 1 | Setting this object to enable will cause all the station ports on the ring which may be controlled by this device to be enabled.… |
| 1.3.6.1.4.1.52.4.1.2.1.1.1.1.1.6 | tRingMgmtStnPortsOn | 1 | 1 | Returns the total number of enabled station ports on this ring which may be controlled by this device. |
| 1.3.6.1.4.1.52.4.1.2.1.1.1.1.1.7 | tRingMgmtRingPortsOn | 1 | 1 | Returns the total number of enabled ring in/out ports on this ring which may be controlled by this device. |
| 1.3.6.1.4.1.52.4.1.2.1.1.1.1.1.8 | tRingMgmtStations | 1 | 1 | Returns the number of stations currently inserted on the ring, if known (includes this device). If not known, returns zero. |
| 1.3.6.1.4.1.52.4.1.2.1.1.1.1.1.9 | tRingMgmtRingState | 1 | 1 | Returns the operational state of the ring, if known. |
| 1.3.6.1.4.1.52.4.1.2.1.1.1.1.1.10 | tRingMgmtRingSpeed | 1 | 1 | Returns the ring speed of the ring, if known. The speed is designated by the value returned: unknown..............0 fourMegaBits… |
| 1.3.6.1.4.1.52.4.1.2.1.1.1.1.1.11 | tRingMgmtActiveMonitor | 1 | 1 | Returns the address of the active monitor on this ring, if known. If unknown, the NULL address (00-00-00-00-00-00) is returned. |
| 1.3.6.1.4.1.52.4.1.2.1.1.1.1.1.12 | tRingMgmtRingNumber | 1 | 1 | A read of this object returns the ring number of the attached ring. If the ring number is indeterminate, a zero is returned. |
| 1.3.6.1.4.1.52.4.1.2.1.1.1.1.1.13 | tRingMgmtBeaconRecovery | 1 | 1 | This object controls the operation of beacon recovery. A write of disable to this object will cause the beacon recovery process… |
| 1.3.6.1.4.1.52.4.1.2.1.1.1.1.1.14 | tRingMgmtBcnRecRingPortRetryCount | 1 | 1 | This object defines the number of times a token ring ring port will be re-enabled after it has been determined that the port is c… |
| 1.3.6.1.4.1.52.4.1.2.1.1.1.1.1.15 | tRingMgmtBcnRecRingPortRetryDelay | 1 | 1 | This object defines the time delay between disabling a token ring ring port due to beaconing and re-enabling the port to check t… |
| 1.3.6.1.4.1.52.4.1.2.1.1.1.1.1.16 | tRingMgmtBcnRecStnPortRetryCount | 1 | 1 | This object defines the number of times a token ring station port will be re-enabled after it has been determined that the port … |
| 1.3.6.1.4.1.52.4.1.2.1.1.1.1.1.17 | tRingMgmtBcnRecStnPortRetryDelay | 1 | 1 | This object defines the time delay between disabling a token ring station port due to beaconing and re-enabling the port to chec… |
| 1.3.6.1.4.1.52.4.1.2.1.1.1.1.1.18 | tRingMgmtBcnRecBrdBypassRetryCount | 1 | 1 | This object defines the number of times a token ring MIM board, having been bypassed by beacon recovery, will be un-bypassed to d… |
| 1.3.6.1.4.1.52.4.1.2.1.1.1.1.1.19 | tRingMgmtBcnRecBrdBypassRetryDelay | 1 | 1 | This object defines the time delay between bypassing a token ring MIM board due to beaconing and re-enabling the MIM board to ch… |
| 1.3.6.1.4.1.52.4.1.2.1.1.1.1.1.20 | tRingMgmtBcnRecBrdWrapRetryCount | 1 | 1 | This object defines the number of times a token ring MIM board, having been wrapped left or right by beacon recovery, will be un-… |
| 1.3.6.1.4.1.52.4.1.2.1.1.1.1.1.21 | tRingMgmtBcnRecBrdWrapRetryDelay | 1 | 1 | This object defines the time delay between wrapping a token ring MIM board left or right due to beaconing and un-wrapping the MI… |
| 1.3.6.1.4.1.52.4.1.2.1.1.1.1.1.22 | tRingMgmtRingPollRecovery | 1 | 1 | This object controls the operation of ring poll failure recovery. A write of disable to this object will cause the ring poll fai… |