This object defines the mode of the board. In Auto Mode, the
board is using its hardware defaults. The default values of the
board are all ports enabled, speed selected by the HW jumper on
the board, the FNB attempts to attach left and right and not
bypassed, ring port phantom current (if applicable) is controlled
via a HW switch, and selectable media (if applicable) is managed
also via a HW switch. In Management Mode, the hardware defaults
may be overridden by network or local management.
Parsed from file dot5-mib.mib.txt
Company: None
Module: DOT5-LOG-MIB
This object defines the mode of the board. In Auto Mode, the
board is using its hardware defaults. The default values of the
board are all ports enabled, speed selected by the HW jumper on
the board, the FNB attempts to attach left and right and not
bypassed, ring port phantom current (if applicable) is controlled
via a HW switch, and selectable media (if applicable) is managed
also via a HW switch. In Management Mode, the hardware defaults
may be overridden by network or local management.
Parsed from file DOT5-LOG-MIB.mib
Module: DOT5-LOG-MIB
tRingPortGrpMode OBJECT-TYPE SYNTAX INTEGER { managementMode(1), autoMode(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object defines the mode of the board. In Auto Mode, the board is using its hardware defaults. The default values of the board are all ports enabled, speed selected by the HW jumper on the board, the FNB attempts to attach left and right and not bypassed, ring port phantom current (if applicable) is controlled via a HW switch, and selectable media (if applicable) is managed also via a HW switch. In Management Mode, the hardware defaults may be overridden by network or local management." ::= { tRingPortGrpEntry 9 }
Vendor: Enterasys Networks Inc.
Module: DOT5-LOG-MIB
[Automatically extracted from oidview.com]
tRingPortGrpMode OBJECT-TYPE SYNTAX INTEGER { managementMode(1), autoMode(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object defines the mode of the board. In Auto Mode, the board is using its hardware defaults. The default values of the board are all ports enabled, speed selected by the HW jumper on the board, the FNB attempts to attach left and right and not bypassed, ring port phantom current (if applicable) is controlled via a HW switch, and selectable media (if applicable) is managed also via a HW switch. In Management Mode, the hardware defaults may be overridden by network or local management." ::= { tRingPortGrpEntry 9 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.52.4.1.2.1.1.2.1.1.1 | tRingPortGrpId | 0 | 0 | Returns an index to a port group for which the information in this table pertains. |
| 1.3.6.1.4.1.52.4.1.2.1.1.2.1.1.2 | tRingPortGrpName | 0 | 0 | An ASCII name assigned to this port group. The default name is Board n', where n is a number 1 through n. |
| 1.3.6.1.4.1.52.4.1.2.1.1.2.1.1.3 | tRingPortGrpStnPortCount | 0 | 0 | This object defines the total number of station ports on the addressed board. |
| 1.3.6.1.4.1.52.4.1.2.1.1.2.1.1.4 | tRingPortGrpRingPortCount | 0 | 0 | This object defines the total number of ring ports (ring-in or ring-out) on the addressed board. |
| 1.3.6.1.4.1.52.4.1.2.1.1.2.1.1.5 | tRingPortGrpStnPortsEnable | 0 | 0 | Setting this object to enable will cause all the station ports in this port group to be enabled. Setting this object to noEnabl… |
| 1.3.6.1.4.1.52.4.1.2.1.1.2.1.1.6 | tRingPortGrpRingPortsEnable | 0 | 0 | Setting this object to enable will cause all the ring ports in this port group to be enabled. Setting this object to noEnable wi… |
| 1.3.6.1.4.1.52.4.1.2.1.1.2.1.1.7 | tRingPortGrpStnPortsOn | 0 | 0 | Returns the total number of enabled station ports in this port group. |
| 1.3.6.1.4.1.52.4.1.2.1.1.2.1.1.8 | tRingPortGrpRingPortsOn | 0 | 0 | Returns the total number of enabled ring in/out ports in this port group. |
| 1.3.6.1.4.1.52.4.1.2.1.1.2.1.1.10 | tRingPortGrpSpeed | 0 | 0 | This object sets the speed of the board. On devices with a MAC interface this object is read-only, and will return NO SUCH NAME … |
| 1.3.6.1.4.1.52.4.1.2.1.1.2.1.1.11 | tRingPortGrpSpeedFault | 0 | 0 | This object reports a ring speed fault. |
| 1.3.6.1.4.1.52.4.1.2.1.1.2.1.1.12 | tRingPortGrpSpeedFaultLocation | 0 | 0 | This object indicates the last ring speed fault detection circuit(s) to detect the fault, if there was one. |
| 1.3.6.1.4.1.52.4.1.2.1.1.2.1.1.13 | tRingPortGrpBypassRingPortState | 0 | 0 | This object sets and reports the state of the ring bypass relay on those token ring boards which support the relay. |