A set of the value enable(1) will cause
a port, as specified by ctVlanPortNum, to remain in the
egress list for the DEFAULT VLAN (VID 1) when the port's
VID, specified by ctVlanPortVID, is changed. A set of disable(2)
will cause the port to be removed from the egress list of the
DEFAULT VLAN when the ports VID is changed.
Parsed from file ctvlan-ext-mib.mib.txt
Company: None
Module: CTRON-VLAN-EXTENSIONS-MIB
A set of the value enable(1) will cause
a port, as specified by ctVlanPortNum, to remain in the
egress list for the DEFAULT VLAN (VID 1) when the port's
VID, specified by ctVlanPortVID, is changed. A set of disable(2)
will cause the port to be removed from the egress list of the
DEFAULT VLAN when the ports VID is changed.
Parsed from file CTRON-VLAN-EXTENSIONS-MIB.mib
Module: CTRON-VLAN-EXTENSIONS-MIB
ctVlanDefaultVIDStickyEgress OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "A set of the value enable(1) will cause a port, as specified by ctVlanPortNum, to remain in the egress list for the DEFAULT VLAN (VID 1) when the port's VID, specified by ctVlanPortVID, is changed. A set of disable(2) will cause the port to be removed from the egress list of the DEFAULT VLAN when the ports VID is changed." DEFVAL { disable } ::= { ctVlanBridgeConfig 5 }
Vendor: Enterasys Networks Inc.
Module: CTRON-VLAN-EXTENSIONS-MIB
[Automatically extracted from oidview.com]
ctVlanDefaultVIDStickyEgress OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "A set of the value enable(1) will cause a port, as specified by ctVlanPortNum, to remain in the egress list for the DEFAULT VLAN (VID 1) when the port's VID, specified by ctVlanPortVID, is changed. A set of disable(2) will cause the port to be removed from the egress list of the DEFAULT VLAN when the ports VID is changed." DEFVAL { disable } ::= { ctVlanBridgeConfig 5 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.52.4.1.2.16.1.5.0 | ctVlanDefaultVIDStickyEgress | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.52.4.1.2.16.1.1 | ctVlanVersionNumber | 1 | 1 | Specifies the IEEE 802.1Q VLAN version number. |
| 1.3.6.1.4.1.52.4.1.2.16.1.2 | ctVlanSupportedOperationalMode | 1 | 1 | This value indicates whether the device allows for flexible VLAN configuration as specified by ctVlanCurrentOperationalMode. A va… |
| 1.3.6.1.4.1.52.4.1.2.16.1.3 | ctVlanCurrentOperationalMode | 1 | 1 | This value indicates the number of bits in a VLAN Id that are considered significant in the forwarding decision of a packet. Thi… |
| 1.3.6.1.4.1.52.4.1.2.16.1.4 | ctVlanResetDefaults | 1 | 1 | A set of the value reset(2) will cause the ctVlanTriggerPortSet table to contain no entries, delete all objects from the ctVlanCo… |
| 1.3.6.1.4.1.52.4.1.2.16.1.6 | ctVlanSupportedPortTable | 1 | 3 | This table specifies which bridge ports on the device support VLANs. |
| 1.3.6.1.4.1.52.4.1.2.16.1.7 | ctVlanLearningMode | 1 | 1 | This value indicates the type of VLAN learning the device supports. A value of ivl(1) indicates the device supports Independent … |