The VLAN-ID of the VLAN on which this spanning tree is
running. Writing a VLAN-ID will create
a separate spanning tree for that VLAN, if it previously
was part of the single 802.1Q VLAN.
Parsed from file CTRON-BRIDGE-MIB.mib
Module: CTRON-BRIDGE-MIB
Vendor: Enterasys Networks Inc.
Module: CTRON-BRIDGE-MIB
[Automatically extracted from oidview.com]
ctPvstStpVlanId OBJECT-TYPE SYNTAX INTEGER (1..4094) ACCESS read-write STATUS deprecated DESCRIPTION "The VLAN-ID of the VLAN on which this spanning tree is running. Writing a VLAN-ID will create a separate spanning tree for that VLAN, if it previously was part of the single 802.1Q VLAN." ::= { ctPvstStpEntry 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.52.4.1.2.3.2.2.5.1.2 | ctPvstStpProtocolSpecification | 0 | 0 | An indication of what version of the Spanning Tree Protocol is being run. The value 'decLb100(2)' indicates the DEC LANbridge 10… |
| 1.3.6.1.4.1.52.4.1.2.3.2.2.5.1.3 | ctPvstStpPriority | 0 | 0 | The value of the write-able portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID. |
| 1.3.6.1.4.1.52.4.1.2.3.2.2.5.1.4 | ctPvstStpTimeSinceTopologyChange | 0 | 0 | The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity. |
| 1.3.6.1.4.1.52.4.1.2.3.2.2.5.1.5 | ctPvstStpTopChanges | 0 | 0 | The total number of topology changes detected by this bridge since the management entity was last reset or initialized. |
| 1.3.6.1.4.1.52.4.1.2.3.2.2.5.1.6 | ctPvstStpDesignatedRoot | 0 | 0 | The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. Thi… |
| 1.3.6.1.4.1.52.4.1.2.3.2.2.5.1.7 | ctPvstStpRootCost | 0 | 0 | The cost of the path to the root as seen from this bridge. |
| 1.3.6.1.4.1.52.4.1.2.3.2.2.5.1.8 | ctPvstStpRootPort | 0 | 0 | The port number of the port which offers the lowest cost path from this bridge to the root bridge. |
| 1.3.6.1.4.1.52.4.1.2.3.2.2.5.1.9 | ctPvstStpMaxAge | 0 | 0 | The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hu… |
| 1.3.6.1.4.1.52.4.1.2.3.2.2.5.1.10 | ctPvstStpHelloTime | 0 | 0 | The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the span… |
| 1.3.6.1.4.1.52.4.1.2.3.2.2.5.1.11 | ctPvstStpHoldTime | 0 | 0 | This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by th… |
| 1.3.6.1.4.1.52.4.1.2.3.2.2.5.1.12 | ctPvstStpForwardDelay | 0 | 0 | This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving tow… |
| 1.3.6.1.4.1.52.4.1.2.3.2.2.5.1.13 | ctPvstStpBridgeMaxAge | 0 | 0 | The value that all bridges use for MaxAge when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range… |
| 1.3.6.1.4.1.52.4.1.2.3.2.2.5.1.14 | ctPvstStpBridgeHelloTime | 0 | 0 | The value that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this timer is specified … |
| 1.3.6.1.4.1.52.4.1.2.3.2.2.5.1.15 | ctPvstStpBridgeForwardDelay | 0 | 0 | The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D-1990 specifies that the… |