Indicates the advertised ability of the remote hardware, or link
partner.
The value is a sum. This sum initially takes the value zero. Then, for
each technology, T, that the link partner supports, 2 raised to (T - 1)
is added to the sum. For example, a link partner advertising
1000BASE-TFD (T = 18) and 1000BASE-T (T = 17) would return a value
of 196608 ((2 ^ (18 - 1)) + (2 ^ (17 - 1))).
For ports supporting Auto-Negotiation, values should be calculated
as follows:
T Technology Description
1 global Reserved for future use.
2 other None of the following.
3 unknown Initializing, true state or type not yet known
4 10BASE-T 10BASE-T Half Duplex
5 10BASE-TFD 10BASE-T Full Duplex
6 100BASE-T4 100BASE-T4 Half Duplex
7 100BASE-TX 100BASE-TX Half Duplex
8 100BASE-TXFD 100BASE-TX Full Duplex
9 FDX PAUSE Full Duplex Flow Control
10 FDX APAUSE Full Duplex Asymmetric Flow Control
11 FDX SPAUSE Full Duplex Symmetric Flow Control
12 FDX BPAUSE Full Duplex Asymmetric and Symmetric Flow Control
13 100BASE-T2 100BASE-T2 Half Duplex
14 100BASE-T2FD 100BASE-T2 Full Duplex
15 1000BASE-X 1000BASE-X Half Duplex
16 1000BASE-XFD 1000BASE-X Full Duplex
17 1000BASE-T 1000BASE-T Half Duplex
18 1000BASE-TFD 1000BASE-T Full Duplex
19 Rem Fault1 Remote Fault Bit 1
20 Rem Fault2 Remote Fault Bit 2
21 ISO Ethernet IEEE Std 802.9 ISLAN-16T
Parsed from file ctron-ethernet-parameters.txt
Company: None
Module: CTRON-ETHERNET-PARAMETERS-MIB
Indicates the advertised ability of the remote hardware, or link
partner.
The value is a sum. This sum initially takes the value zero. Then, for
each technology, T, that the link partner supports, 2 raised to (T - 1)
is added to the sum. For example, a link partner advertising
1000BASE-TFD (T = 18) and 1000BASE-T (T = 17) would return a value
of 196608 ((2 ^ (18 - 1)) + (2 ^ (17 - 1))).
For ports supporting Auto-Negotiation, values should be calculated
as follows:
T Technology Description
1 global Reserved for future use.
2 other None of the following.
3 unknown Initializing, true state or type not yet known
4 10BASE-T 10BASE-T Half Duplex
5 10BASE-TFD 10BASE-T Full Duplex
6 100BASE-T4 100BASE-T4 Half Duplex
7 100BASE-TX 100BASE-TX Half Duplex
8 100BASE-TXFD 100BASE-TX Full Duplex
9 FDX PAUSE Full Duplex Flow Control
10 FDX APAUSE Full Duplex Asymmetric Flow Control
11 FDX SPAUSE Full Duplex Symmetric Flow Control
12 FDX BPAUSE Full Duplex Asymmetric and Symmetric Flow Control
13 100BASE-T2 100BASE-T2 Half Duplex
14 100BASE-T2FD 100BASE-T2 Full Duplex
15 1000BASE-X 1000BASE-X Half Duplex
16 1000BASE-XFD 1000BASE-X Full Duplex
17 1000BASE-T 1000BASE-T Half Duplex
18 1000BASE-TFD 1000BASE-T Full Duplex
19 Rem Fault1 Remote Fault Bit 1
20 Rem Fault2 Remote Fault Bit 2
21 ISO Ethernet IEEE Std 802.9 ISLAN-16T
Parsed from file CTRON-ETHERNET-PARAMETERS-MIB.mib
Module: CTRON-ETHERNET-PARAMETERS-MIB
ctAutoNegReceivedTechnologyAbility OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the advertised ability of the remote hardware, or link partner. The value is a sum. This sum initially takes the value zero. Then, for each technology, T, that the link partner supports, 2 raised to (T - 1) is added to the sum. For example, a link partner advertising 1000BASE-TFD (T = 18) and 1000BASE-T (T = 17) would return a value of 196608 ((2 ^ (18 - 1)) + (2 ^ (17 - 1))). For ports supporting Auto-Negotiation, values should be calculated as follows: T Technology Description 1 global Reserved for future use. 2 other None of the following. 3 unknown Initializing, true state or type not yet known 4 10BASE-T 10BASE-T Half Duplex 5 10BASE-TFD 10BASE-T Full Duplex 6 100BASE-T4 100BASE-T4 Half Duplex 7 100BASE-TX 100BASE-TX Half Duplex 8 100BASE-TXFD 100BASE-TX Full Duplex 9 FDX PAUSE Full Duplex Flow Control 10 FDX APAUSE Full Duplex Asymmetric Flow Control 11 FDX SPAUSE Full Duplex Symmetric Flow Control 12 FDX BPAUSE Full Duplex Asymmetric and Symmetric Flow Control 13 100BASE-T2 100BASE-T2 Half Duplex 14 100BASE-T2FD 100BASE-T2 Full Duplex 15 1000BASE-X 1000BASE-X Half Duplex 16 1000BASE-XFD 1000BASE-X Full Duplex 17 1000BASE-T 1000BASE-T Half Duplex 18 1000BASE-TFD 1000BASE-T Full Duplex 19 Rem Fault1 Remote Fault Bit 1 20 Rem Fault2 Remote Fault Bit 2 21 ISO Ethernet IEEE Std 802.9 ISLAN-16T " REFERENCE "IEEE Std 802.3, 1998 Edition 30.6.1.1.7" ::= { ctAutoNegCtlEntry 6 }
Vendor: Enterasys Networks Inc.
Module: CTRON-ETHERNET-PARAMETERS-MIB
[Automatically extracted from oidview.com]
ctAutoNegReceivedTechnologyAbility OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the advertised ability of the remote hardware, or link partner. The value is a sum. This sum initially takes the value zero. Then, for each technology, T, that the link partner supports, 2 raised to (T - 1) is added to the sum. For example, a link partner advertising 1000BASE-TFD (T = 18) and 1000BASE-T (T = 17) would return a value of 196608 ((2 ^ (18 - 1)) + (2 ^ (17 - 1))). For ports supporting Auto-Negotiation, values should be calculated as follows: T Technology Description 1 global Reserved for future use. 2 other None of the following. 3 unknown Initializing, true state or type not yet known 4 10BASE-T 10BASE-T Half Duplex 5 10BASE-TFD 10BASE-T Full Duplex 6 100BASE-T4 100BASE-T4 Half Duplex 7 100BASE-TX 100BASE-TX Half Duplex 8 100BASE-TXFD 100BASE-TX Full Duplex 9 FDX PAUSE Full Duplex Flow Control 10 FDX APAUSE Full Duplex Asymmetric Flow Control 11 FDX SPAUSE Full Duplex Symmetric Flow Control 12 FDX BPAUSE Full Duplex Asymmetric and Symmetric Flow Control 13 100BASE-T2 100BASE-T2 Half Duplex 14 100BASE-T2FD 100BASE-T2 Full Duplex 15 1000BASE-X 1000BASE-X Half Duplex 16 1000BASE-XFD 1000BASE-X Full Duplex 17 1000BASE-T 1000BASE-T Half Duplex 18 1000BASE-TFD 1000BASE-T Full Duplex 19 Rem Fault1 Remote Fault Bit 1 20 Rem Fault2 Remote Fault Bit 2 21 ISO Ethernet IEEE Std 802.9 ISLAN-16T " REFERENCE "IEEE Std 802.3, 1998 Edition 30.6.1.1.7" ::= { ctAutoNegCtlEntry 6 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.52.4.1.2.4.2.1.1.1.1 | ctAutoNegAdminStatus | 0 | 0 | This object controls whether Auto-Negotiation is enabled for the specified port. If Auto-Negotiation is disabled the port will r… |
| 1.3.6.1.4.1.52.4.1.2.4.2.1.1.1.2 | ctAutoNegRemoteSignalling | 0 | 0 | This object indicates whether the remote end of the link is operating Auto-Negotiation signalling or not. |
| 1.3.6.1.4.1.52.4.1.2.4.2.1.1.1.3 | ctAutoNegAutoConfig | 0 | 0 | This object indicates whether Auto-Negotiation signalling is in progress or has completed. |
| 1.3.6.1.4.1.52.4.1.2.4.2.1.1.1.4 | ctAutoNegLocalTechnologyAbility | 0 | 0 | This indicates the technology ability of the local hardware. The value is a sum. This sum initially takes the value zero. Then,… |
| 1.3.6.1.4.1.52.4.1.2.4.2.1.1.1.5 | ctAutoNegAdvertisedTechnologyAbility | 0 | 0 | Indicates the advertised ability of the local hardware, but only becomes active on ports that have auto-negotiation enabled. The … |