Indicates the type of comparison to be performed on the value
portion of the OID being polled. This comparator will be used
to compare the OID value with the threshold value defined in
this entry. A value of 'dont-compare' causes no comparison to
be performed. Comparison failures will trigger an alarm
condition.
Parsed from file dlm-mib.mib.txt
Company: None
Module: DLM-MIB
Indicates the type of comparison to be performed on the value
portion of the OID being polled. This comparator will be used
to compare the OID value with the threshold value defined in
this entry. A value of 'dont-compare' causes no comparison to
be performed. Comparison failures will trigger an alarm
condition.
Parsed from file DLM-MIB.mib
Module: DLM-MIB
snmpOIDComparator OBJECT-TYPE SYNTAX INTEGER { equal(1), greater(2), less(3), greater-or-equal(4), less-or-equal(5), trap-always(6), dont-compare(7), not-equal(8) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates the type of comparison to be performed on the value portion of the OID being polled. This comparator will be used to compare the OID value with the threshold value defined in this entry. A value of 'dont-compare' causes no comparison to be performed. Comparison failures will trigger an alarm condition." DEFVAL { dont-compare } ::= { snmpOIDEntry 5 }
Vendor: Enterasys Networks Inc.
Module: DLM-MIB
[Automatically extracted from oidview.com]
snmpOIDComparator OBJECT-TYPE SYNTAX INTEGER { equal(1), greater(2), less(3), greater-or-equal(4), less-or-equal(5), trap-always(6), dont-compare(7), not-equal(8) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates the type of comparison to be performed on the value portion of the OID being polled. This comparator will be used to compare the OID value with the threshold value defined in this entry. A value of 'dont-compare' causes no comparison to be performed. Comparison failures will trigger an alarm condition." DEFVAL { dont-compare } ::= { snmpOIDEntry 5 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.52.4.2.1.2.1.1 | snmpOIDDestination | 0 | 0 | The IP address of the host/device to be polled. |
| 1.3.6.1.4.1.52.4.2.1.2.1.2 | snmpOIDOwner | 0 | 0 | The IP address of the client which created this OID request entry. |
| 1.3.6.1.4.1.52.4.2.1.2.1.3 | snmpOIDSequence | 0 | 0 | The sequence number which uniquely idenifies this OID entry entry within a particular SNMP poll request. This number is incremen… |
| 1.3.6.1.4.1.52.4.2.1.2.1.4 | snmpOIDObject | 0 | 0 | Identifies the Object Identifier to be polled. This OID value will be placed in a SNMP GET REQUEST PDU on each poll interval. |
| 1.3.6.1.4.1.52.4.2.1.2.1.6 | snmpOIDEnumType | 0 | 0 | Indicates the type of value to expect from the OID being polled such that the correct interpretation of the threshold value can b… |
| 1.3.6.1.4.1.52.4.2.1.2.1.7 | snmpOIDThresholdInteger | 0 | 0 | The threshold value to be used when polling an integer-valued Object Identifier. |
| 1.3.6.1.4.1.52.4.2.1.2.1.8 | snmpOIDThresholdCounter | 0 | 0 | The threshold value to be used when polling a Counter-type Object Identifier. |
| 1.3.6.1.4.1.52.4.2.1.2.1.9 | snmpOIDThresholdGauge | 0 | 0 | The threshold value to be used when polling a Gauge-type Object Identifier. |
| 1.3.6.1.4.1.52.4.2.1.2.1.10 | snmpOIDThresholdTicks | 0 | 0 | The threshold value to be used when polling a TimeTicks-type Object Identifier. |
| 1.3.6.1.4.1.52.4.2.1.2.1.11 | snmpOIDType | 0 | 0 | The administrative control of this Object Identifier entry. This leaf is used to control adding, using, and deleting OIDs from th… |
| 1.3.6.1.4.1.52.4.2.1.2.1.12 | snmpOIDStatus | 0 | 0 | The status of the last poll of this Object ID. |
| 1.3.6.1.4.1.52.4.2.1.2.1.13 | snmpOIDLastValue | 0 | 0 | The value of the last poll entry treated as an integer value. This field is used to allow RMON alarms to monitor the polled value… |