Each entry specifies additional APPN configuration parameters
for the port for which this entry exists.
Parsed from file ctappn-mib.mib.txt
Company: None
Module: CTRON-APPN-MIB
Each entry specifies additional APPN configuration parameters
for the port for which this entry exists.
Parsed from file CTRON-APPN-MIB.mib
Module: CTRON-APPN-MIB
nwAppnExtEntry OBJECT-TYPE SYNTAX NwAppnExtEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry specifies additional APPN configuration parameters for the port for which this entry exists." INDEX { nwAppnExtIfIndex } ::= { nwAppnExtensionTable 1 }
Vendor: Enterasys Networks Inc.
Module: CTRON-APPN-MIB
[Automatically extracted from oidview.com]
nwAppnExtEntry OBJECT-TYPE SYNTAX NwAppnExtEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry specifies additional APPN configuration parameters for the port for which this entry exists." INDEX { nwAppnExtIfIndex } ::= { nwAppnExtensionTable 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.2.1.1 | nwAppnExtIfIndex | 0 | 0 | Specifies the primary index into the APPN port extension table. This number corresponds to the index into the nwAppnFwdIfTable. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.2.1.2 | nwAppnExtIfPortName | 0 | 0 | Specifies the user friendly name for this port. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.2.1.4 | nwAppnExtIfPortType | 0 | 0 | Specifies the type of line used by the port. The value corresponds to one of the following: nonswitched(1), switched(2), or sat… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.2.1.5 | nwAppnExtIfDlcType | 0 | 0 | Specifies the type of DLC using the port. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.2.1.6 | nwAppnExtIfMaxRBtuSize | 0 | 0 | Specifies the maximum Message Unit (MU) size that can be received. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.2.1.7 | nwAppnExtIfTotLsActLim | 0 | 0 | nwAppnExtIftotLsActLim |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.2.1.8 | nwAppnExtIfInbLsActLim | 0 | 0 | Specifies the total number of inbound links that can be active on this port. If nwAppnExtIfPortType = nonswitched(1) and nwAppnE… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.2.1.9 | nwAppnExtIfOutbLsActLim | 0 | 0 | Specifies the total number of outbound links that can be active on this port. If nwAppnExtIfPortType = nonswitched(1) and nwAppn… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.2.1.10 | nwAppnExtIfLocalLsRole | 0 | 0 | Specifies the link station role - primary, secondary, or negotiable. For nwAppnExtIfPortType = satf(3), the link station role mu… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.2.1.11 | nwAppnExtIfActXidXchgLimit | 0 | 0 | Specifies the total number of activation XIDs that may be exchanged. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.2.1.12 | nwAppnExtIfNonActXidXchgLimit | 0 | 0 | Specifies the total number of non-activation XIDs that may be exchanged. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.2.1.13 | nwAppnExtIfLsXmitRcvCap | 0 | 0 | Specifies the link station's transmit/receive capability. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.2.1.14 | nwAppnExtIfMaxIfrmRcvd | 0 | 0 | Specifies the maximum number of I-frames received before an acknowledgment is sent to the sender. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.2.1.15 | nwAppnExtIfDfltTargetPacing | 0 | 0 | Specifies the pacing window size for BINDs on this transmission group. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.2.1.16 | nwAppnExtIfDfltMaxSBtuSize | 0 | 0 | Specifies the maximum Message Unit (MU) size which can be sent. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.2.1.17 | nwAppnExtIfDfltEffectCap | 0 | 0 | Specifies the default maximum kilo bits per second rate (line speed) for all links on this port. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.2.1.18 | nwAppnExtIfDfltConnectCost | 0 | 0 | Specifies the default cost per connect time for all link stations on this port. 0 is the lowest cost and 255 is the largest cost. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.2.1.19 | nwAppnExtIfDfltByteCost | 0 | 0 | Specifies the default Cost per Byte for link stations. 0 is the lowest cost and 255 is the largest cost. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.2.1.20 | nwAppnExtIfDfltSecurity | 0 | 0 | Specify one of the following security selections: non-secure - specifies no security. public switched - data flows over … |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.2.1.21 | nwAppnExtIfDfltPropDelay | 0 | 0 | Specifies the propagation delay which represents the relative time it takes for a signal to travel the length of the link in micr… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.2.1.22 | nwAppnExtIfDfltUsrDef1 | 0 | 0 | Specifies user defined parameter 1. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.2.1.23 | nwAppnExtIfDfltUsrDef2 | 0 | 0 | Specifies user defined parameter 2. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.2.1.24 | nwAppnExtIfDfltUsrDef3 | 0 | 0 | Specifies user defined parameter 3. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.2.1.25 | nwAppnExtIfStopType | 0 | 0 | Specifies the type of shutdown for APPN Routing Services on the port. Once set, nwAppnFwdIfAdminStatus may be set to disable. The… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.2.1.26 | nwAppnExtIfCpCpSupp | 0 | 0 | Specifies whether CP-CP sessions are permitted on dynamic links generated on this port. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.2.1.27 | nwAppnExtIfLimitedRsrc | 0 | 0 | Specifies whether dynamic links generated on this port are a limited resource. A limited resource link will be deactivated when t… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.2.1.28 | nwAppnExtIfAddress | 0 | 0 | Specifies the physical address of this port depending on the media type. For token ring or ethernet ports, the information is the… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.2.1.29 | nwAppnExtIfSsap | 0 | 0 | For token ring or ethernet ports specifies the Source SAP Address of this port. |