The frame relay link type.
Parsed from file mibinet.mib.txt
Company: None
Module: ASCEND-MIBINTERNETPROFILE-MIB
The frame relay link type.
Parsed from file ASCEND-MIBINET-MIB.mib
Module: ASCEND-MIBINET-MIB
Vendor: Ascend Communications Inc.
Module: ASCEND-MIBINET-MIB
[Automatically extracted from oidview.com]
internetProfile__fr_options__fr_link_type OBJECT-TYPE SYNTAX INTEGER { transparent_link (1), host_link (2), trunk_link (3) } ACCESS read-write STATUS mandatory DESCRIPTION "The frame relay link type." ::= { mibinternetProfileEntry 303 }
internetProfile-FrOptions-FrLinkType OBJECT-TYPE SYNTAX INTEGER { transparentLink (1), hostLink (2), trunkLink (3) } ACCESS read-write STATUS mandatory DESCRIPTION "The frame relay link type." ::= { mibinternetProfileEntry 303 }
To many brothers! Only 100 nearest brothers are shown.
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| ... | ||||
| 1.3.6.1.4.1.529.23.1.1.1.253 | internetProfile-BridgingOptions-Fill2, internetProfile__bridging_options__fill_2 | 0 | 0 | filler to get to 32 bit boundary |
| 1.3.6.1.4.1.529.23.1.1.1.254 | internetProfile-TelcoOptions-NasPortType, internetProfile__telco_options__nas_port_type | 0 | 0 | Indicates the type of physical port being used. |
| 1.3.6.1.4.1.529.23.1.1.1.255 | internetProfile-MpOptions-BodEnable, internetProfile__mp_options__bod_enable | 0 | 0 | Enable Bandwidth On Demand. |
| 1.3.6.1.4.1.529.23.1.1.1.256 | internetProfile-AtmOptions-NailedGroup, internetProfile__atm_options__nailed_group | 0 | 0 | A number that identifies the set of lines that makes up a nailed-group. |
| 1.3.6.1.4.1.529.23.1.1.1.257 | internetProfile-AtmOptions-AtmServiceType, internetProfile__atm_options__atm_service_type | 0 | 0 | ATM service type. |
| 1.3.6.1.4.1.529.23.1.1.1.258 | internetProfile-AtmOptions-AtmServiceRate, internetProfile__atm_options__atm_service_rate | 0 | 0 | ATM service rate is the minimum bits per second that is required. |
| 1.3.6.1.4.1.529.23.1.1.1.259 | internetProfile-HdlcNrmOptions-SnrmResponseTimeout, internetProfile__hdlc_nrm_options__snrm_response_timeout | 0 | 0 | SNRM Response Timeout in milliseconds. |
| 1.3.6.1.4.1.529.23.1.1.1.260 | internetProfile-HdlcNrmOptions-SnrmRetryCounter, internetProfile__hdlc_nrm_options__snrm_retry_counter | 0 | 0 | SNRM Retry Counter in units. |
| 1.3.6.1.4.1.529.23.1.1.1.261 | internetProfile-HdlcNrmOptions-PollTimeout, internetProfile__hdlc_nrm_options__poll_timeout | 0 | 0 | HDLC-NRM Poll Reponse Timeout in milliseconds |
| 1.3.6.1.4.1.529.23.1.1.1.262 | internetProfile-HdlcNrmOptions-PollRate, internetProfile__hdlc_nrm_options__poll_rate | 0 | 0 | HDLC-NRM Poll Rate in milliseconds |
| 1.3.6.1.4.1.529.23.1.1.1.263 | internetProfile-HdlcNrmOptions-PollRetryCount, internetProfile__hdlc_nrm_options__poll_retry_count | 0 | 0 | Poll Response Retry Counter in units |
| 1.3.6.1.4.1.529.23.1.1.1.264 | internetProfile-HdlcNrmOptions-Primary, internetProfile__hdlc_nrm_options__primary | 0 | 0 | Primary station (Yes) or Secondary station (No). |
| 1.3.6.1.4.1.529.23.1.1.1.265 | internetProfile-AtmConnectOptions-Atm1483type, internetProfile__atm_connect_options__atm1483type | 0 | 0 | The type of AAL5 multiplexing. |
| 1.3.6.1.4.1.529.23.1.1.1.266 | internetProfile-AtmConnectOptions-Vpi, internetProfile__atm_connect_options__vpi | 0 | 0 | The VPI of this connection. |
| 1.3.6.1.4.1.529.23.1.1.1.267 | internetProfile-AtmConnectOptions-Vci, internetProfile__atm_connect_options__vci | 0 | 0 | The VCI of this connection. |
| 1.3.6.1.4.1.529.23.1.1.1.268 | internetProfile-AtmConnectOptions-NailedGroup, internetProfile__atm_connect_options__nailed_group | 0 | 0 | A number that identifies the set of lines that makes up a nailed-group. |
| 1.3.6.1.4.1.529.23.1.1.1.269 | internetProfile-AtmConnectOptions-AtmServiceType, internetProfile__atm_connect_options__atm_service_type | 0 | 0 | ATM service type. |
| 1.3.6.1.4.1.529.23.1.1.1.270 | internetProfile-AtmConnectOptions-AtmServiceRate, internetProfile__atm_connect_options__atm_service_rate | 0 | 0 | ATM service rate is the minimum bits per second that is required. |
| 1.3.6.1.4.1.529.23.1.1.1.271 | internetProfile-Visa2Options-IdleCharacterDelay, internetProfile__visa2_options__idle_character_delay | 0 | 0 | Idle Character Delay in milliseconds. |
| 1.3.6.1.4.1.529.23.1.1.1.272 | internetProfile-Visa2Options-FirstDataForwardCharacter, internetProfile__visa2_options__first_data_forward_character | 0 | 0 | First Data Forwarding Character. Default is 0x04 |
| 1.3.6.1.4.1.529.23.1.1.1.273 | internetProfile-Visa2Options-SecondDataForwardCharacter, internetProfile__visa2_options__second_data_forward_character | 0 | 0 | Second Data Forwarding Character. Default is 0x06 |
| 1.3.6.1.4.1.529.23.1.1.1.274 | internetProfile-Visa2Options-ThirdDataForwardCharacter, internetProfile__visa2_options__third_data_forward_character | 0 | 0 | Third Data Forwarding Character. Default is 0x15 |
| 1.3.6.1.4.1.529.23.1.1.1.275 | internetProfile-Visa2Options-FourthDataForwardCharacter, internetProfile__visa2_options__fourth_data_forward_character | 0 | 0 | Fourth Data Forwarding Character. Default is 0x05 |
| 1.3.6.1.4.1.529.23.1.1.1.276 | internetProfile-Visa2Options-o1CharSequence, internetProfile__visa2_options__1_char_sequence | 0 | 0 | 1 character data forwarding sequence. Default is 0x03 |
| 1.3.6.1.4.1.529.23.1.1.1.277 | internetProfile-Visa2Options-o2CharSequence, internetProfile__visa2_options__2_char_sequence | 0 | 0 | 2 character data forwarding sequence. Default is 0x00:0x03 |
| 1.3.6.1.4.1.529.23.1.1.1.278 | internetProfile-SdtnPacketsServer, internetProfile__sdtn_packets_server | 0 | 0 | Decides if this profile Handles sdtn-packets. Note, the Sdtn data packets may still be encapsulated |
| 1.3.6.1.4.1.529.23.1.1.1.279 | internetProfile-oATString, internetProfile__AT_string | 0 | 0 | Allows the user to enter customized AT commands in the modem dial or answer string. |
| 1.3.6.1.4.1.529.23.1.1.1.280 | internetProfile-PortRedirectOptions-Protocol, internetProfile__port_redirect_options__protocol | 0 | 0 | The protocol to be redirected. |
| 1.3.6.1.4.1.529.23.1.1.1.281 | internetProfile-PortRedirectOptions-PortNumber, internetProfile__port_redirect_options__port_number | 0 | 0 | Port number to be redirected. |
| 1.3.6.1.4.1.529.23.1.1.1.282 | internetProfile-PortRedirectOptions-RedirectAddress, internetProfile__port_redirect_options__redirect_address | 0 | 0 | IP Address of server to which packet is to be redirected. |
| 1.3.6.1.4.1.529.23.1.1.1.283 | internetProfile-SharedProf, internetProfile__shared_prof | 0 | 0 | When TRUE multiple users may share a connection profile, as long as IP addresses are not duplicated. |
| 1.3.6.1.4.1.529.23.1.1.1.284 | internetProfile-MpOptions-CallbackrequestEnable, internetProfile__mp_options__callbackrequest_enable | 0 | 0 | Allow BAP CallBackRequest. |
| 1.3.6.1.4.1.529.23.1.1.1.285 | internetProfile-BridgingOptions-Egress, internetProfile__bridging_options__egress | 0 | 0 | Enable/disable Egress on this interface. This interface will become the exit path for all packets destined to the network. |
| 1.3.6.1.4.1.529.23.1.1.1.286 | internetProfile-SessionOptions-TrafficShaper, internetProfile__session_options__traffic_shaper | 0 | 0 | The traffic shaper assigned to this profile. |
| 1.3.6.1.4.1.529.23.1.1.1.287 | internetProfile-FrOptions-MfrBundleName, internetProfile__fr_options__mfr_bundle_name | 0 | 0 | Name of the multi-link frame-relay profile. |
| 1.3.6.1.4.1.529.23.1.1.1.288 | internetProfile-PppoeOptions-Pppoe, internetProfile__pppoe_options__pppoe | 0 | 0 | Enable or disable the ability to establish PPP over Ethernet session over this interface. |
| 1.3.6.1.4.1.529.23.1.1.1.289 | internetProfile-PppoeOptions-BridgeNonPppoe, internetProfile__pppoe_options__bridge_non_pppoe | 0 | 0 | States wheather to bridge all other protocols except PPPoE on this interface or not. |
| 1.3.6.1.4.1.529.23.1.1.1.290 | internetProfile-BirOptions-Enable, internetProfile__bir_options__enable | 0 | 0 | Enable or disable the BIR on this interface. |
| 1.3.6.1.4.1.529.23.1.1.1.291 | internetProfile-BirOptions-ProxyArp, internetProfile__bir_options__proxy_arp | 0 | 0 | Specify how proxy arp is to be used on an interface. |
| 1.3.6.1.4.1.529.23.1.1.1.292 | internetProfile-SubAddress, internetProfile__sub_address | 0 | 0 | The sub-address extension to the dialed number of the station. |
| 1.3.6.1.4.1.529.23.1.1.1.293 | internetProfile-IpOptions-ClientWinsPrimaryAddr, internetProfile__ip_options__client_wins_primary_addr | 0 | 0 | User specific WINS Primary Address. |
| 1.3.6.1.4.1.529.23.1.1.1.294 | internetProfile-IpOptions-ClientWinsSecondaryAddr, internetProfile__ip_options__client_wins_secondary_addr | 0 | 0 | User specific WINS Secondary Address. |
| 1.3.6.1.4.1.529.23.1.1.1.295 | internetProfile-IpOptions-ClientWinsAddrAssign, internetProfile__ip_options__client_wins_addr_assign | 0 | 0 | A flag to control assigning user specific WINS Addresses. |
| 1.3.6.1.4.1.529.23.1.1.1.296 | internetProfile-IpOptions-PrivateRouteTable, internetProfile__ip_options__private_route_table | 0 | 0 | Private route table ID for this connection |
| 1.3.6.1.4.1.529.23.1.1.1.297 | internetProfile-IpOptions-PrivateRouteProfileRequired, internetProfile__ip_options__private_route_profile_required | 0 | 0 | Parameter to decide default action,if private route table not found. If set to yes, the call will be cleared if the private rou… |
| 1.3.6.1.4.1.529.23.1.1.1.298 | internetProfile-SessionOptions-FilterRequired, internetProfile__session_options__filter_required | 0 | 0 | If No, the call will be allowed to come up even if the specified filter was not found either locally, in the cache or in RADIUS… |
| 1.3.6.1.4.1.529.23.1.1.1.299 | internetProfile-SessionOptions-MaxtapLogServer, internetProfile__session_options__maxtap_log_server | 0 | 0 | The name or the IP Address of the host to which the MaxTap start/stop notifications has to be sent. |
| 1.3.6.1.4.1.529.23.1.1.1.300 | internetProfile-SessionOptions-MaxtapDataServer, internetProfile__session_options__maxtap_data_server | 0 | 0 | The name or the IP Address of the host to which the tapped data has to be sent. |
| 1.3.6.1.4.1.529.23.1.1.1.301 | internetProfile-PppOptions-Mtu, internetProfile__ppp_options__mtu | 0 | 0 | The Maximum Transmit Unit, i.e. the largest frame we will transmit. |
| 1.3.6.1.4.1.529.23.1.1.1.302 | internetProfile-FrOptions-CircuitType, internetProfile__fr_options__circuit_type | 0 | 0 | The type of circuit, permanent (PVC) or switched (SVC). |
| 1.3.6.1.4.1.529.23.1.1.1.304 | internetProfile-AtmOptions-VpSwitching, internetProfile__atm_options__vp_switching | 0 | 0 | Is this VP switching? VP = 0 is used for VC switching and VP > 0 is used for VP switching. |
| 1.3.6.1.4.1.529.23.1.1.1.305 | internetProfile__atm_options__qos_contract | 0 | 0 | Service contract for Quality of Service (QoS) |
| 1.3.6.1.4.1.529.23.1.1.1.306 | internetProfile-AtmOptions-AtmDirectEnabled, internetProfile__atm_options__atm_direct_enabled | 0 | 0 | Enable ATM Direct. |
| 1.3.6.1.4.1.529.23.1.1.1.307 | internetProfile-AtmOptions-AtmDirectProfile, internetProfile__atm_options__atm_direct_profile | 0 | 0 | The atm connection profile name to be used for the ATM Direct connection. |
| 1.3.6.1.4.1.529.23.1.1.1.308 | internetProfile-AtmOptions-SvcOptions-Enabled, internetProfile__atm_options__svc_options__enabled | 0 | 0 | Enable ATM SVC. |
| 1.3.6.1.4.1.529.23.1.1.1.309 | internetProfile__atm_options__svc_options__called_addr__numbering_plan | 0 | 0 | Numbering plan for an SVC address |
| 1.3.6.1.4.1.529.23.1.1.1.310 | internetProfile__atm_options__svc_options__called_addr__e164_native_address | 0 | 0 | An SVC address in a native E.164 format. |
| 1.3.6.1.4.1.529.23.1.1.1.311 | internetProfile__atm_options__svc_options__called_addr__aesa_address__format | 0 | 0 | An AESA address format used to define this SVC address. |
| 1.3.6.1.4.1.529.23.1.1.1.312 | internetProfile__atm_options__svc_options__called_addr__aesa_address__idp_portion__afi | 0 | 0 | An Authority and Format Identifier(AFI) for AESA address. Must be defined for every AESA address. |
| 1.3.6.1.4.1.529.23.1.1.1.313 | internetProfile__atm_options__svc_options__called_addr__aesa_address__idp_portion__idi | 0 | 0 | An Initial Domain Identifier (IDI) portion of the AESA address. |
| 1.3.6.1.4.1.529.23.1.1.1.314 | internetProfile__atm_options__svc_options__called_addr__aesa_address__dsp_portion__ho_dsp | 0 | 0 | A High-Order Domain-Specific Part of AESA address. The IDP portion determine the format of the HO-DSP. |
| 1.3.6.1.4.1.529.23.1.1.1.315 | internetProfile__atm_options__svc_options__called_addr__aesa_address__dsp_portion__esi | 0 | 0 | An End System Identifier (ESI) which uniquely identifies the end system within the specified subnetwork. |
| 1.3.6.1.4.1.529.23.1.1.1.316 | internetProfile__atm_options__svc_options__called_addr__aesa_address__dsp_portion__sel | 0 | 0 | A selector (SEL) field that may be used by the end system. |
| 1.3.6.1.4.1.529.23.1.1.1.317 | internetProfile__atm_options__svc_options__caller_addr__numbering_plan | 0 | 0 | Numbering plan for an SVC address |
| 1.3.6.1.4.1.529.23.1.1.1.318 | internetProfile__atm_options__svc_options__caller_addr__e164_native_address | 0 | 0 | An SVC address in a native E.164 format. |
| 1.3.6.1.4.1.529.23.1.1.1.319 | internetProfile__atm_options__svc_options__caller_addr__aesa_address__format | 0 | 0 | An AESA address format used to define this SVC address. |
| 1.3.6.1.4.1.529.23.1.1.1.320 | internetProfile__atm_options__svc_options__caller_addr__aesa_address__idp_portion__afi | 0 | 0 | An Authority and Format Identifier(AFI) for AESA address. Must be defined for every AESA address. |
| 1.3.6.1.4.1.529.23.1.1.1.321 | internetProfile__atm_options__svc_options__caller_addr__aesa_address__idp_portion__idi | 0 | 0 | An Initial Domain Identifier (IDI) portion of the AESA address. |
| 1.3.6.1.4.1.529.23.1.1.1.322 | internetProfile__atm_options__svc_options__caller_addr__aesa_address__dsp_portion__ho_dsp | 0 | 0 | A High-Order Domain-Specific Part of AESA address. The IDP portion determine the format of the HO-DSP. |
| 1.3.6.1.4.1.529.23.1.1.1.323 | internetProfile__atm_options__svc_options__caller_addr__aesa_address__dsp_portion__esi | 0 | 0 | An End System Identifier (ESI) which uniquely identifies the end system within the specified subnetwork. |
| 1.3.6.1.4.1.529.23.1.1.1.324 | internetProfile__atm_options__svc_options__caller_addr__aesa_address__dsp_portion__sel | 0 | 0 | A selector (SEL) field that may be used by the end system. |
| 1.3.6.1.4.1.529.23.1.1.1.325 | internetProfile__atm_options__svc_options__insert_calling_party_addr | 0 | 0 | Insert calling party address if one is available during call setup. |
| 1.3.6.1.4.1.529.23.1.1.1.326 | internetProfile__atm_options__svc_options__cdvt_us | 0 | 0 | Cell Delay Variation Tolerance(CDVT) (in microseconds) used to police the requested traffic descriptor. |
| 1.3.6.1.4.1.529.23.1.1.1.327 | internetProfile-AtmOptions-AtmInverseArp, internetProfile__atm_options__atm_inverse_arp | 0 | 0 | Send Atm Inverse Arp request for this connection. |
| 1.3.6.1.4.1.529.23.1.1.1.328 | internetProfile-AtmConnectOptions-VpSwitching, internetProfile__atm_connect_options__vp_switching | 0 | 0 | Is this VP switching? VP = 0 is used for VC switching and VP > 0 is used for VP switching. |
| 1.3.6.1.4.1.529.23.1.1.1.329 | internetProfile__atm_connect_options__qos_contract | 0 | 0 | Service contract for Quality of Service (QoS) |
| 1.3.6.1.4.1.529.23.1.1.1.330 | internetProfile-AtmConnectOptions-AtmDirectEnabled, internetProfile__atm_connect_options__atm_direct_enabled | 0 | 0 | Enable ATM Direct. |
| 1.3.6.1.4.1.529.23.1.1.1.331 | internetProfile-AtmConnectOptions-AtmDirectProfile, internetProfile__atm_connect_options__atm_direct_profile | 0 | 0 | The atm connection profile name to be used for the ATM Direct connection. |
| 1.3.6.1.4.1.529.23.1.1.1.332 | internetProfile-AtmConnectOptions-SvcOptions-Enabled, internetProfile__atm_connect_options__svc_options__enabled | 0 | 0 | Enable ATM SVC. |
| 1.3.6.1.4.1.529.23.1.1.1.333 | internetProfile__atm_connect_options__svc_options__called_addr__numbering_plan | 0 | 0 | Numbering plan for an SVC address |
| 1.3.6.1.4.1.529.23.1.1.1.334 | internetProfile__atm_connect_options__svc_options__called_addr__e164_native_address | 0 | 0 | An SVC address in a native E.164 format. |
| 1.3.6.1.4.1.529.23.1.1.1.335 | internetProfile__atm_connect_options__svc_options__called_addr__aesa_address__format | 0 | 0 | An AESA address format used to define this SVC address. |
| 1.3.6.1.4.1.529.23.1.1.1.336 | internetProfile__atm_connect_options__svc_options__called_addr__aesa_address__idp_portion__afi | 0 | 0 | An Authority and Format Identifier(AFI) for AESA address. Must be defined for every AESA address. |
| 1.3.6.1.4.1.529.23.1.1.1.337 | internetProfile__atm_connect_options__svc_options__called_addr__aesa_address__idp_portion__idi | 0 | 0 | An Initial Domain Identifier (IDI) portion of the AESA address. |
| 1.3.6.1.4.1.529.23.1.1.1.338 | internetProfile__atm_connect_options__svc_options__called_addr__aesa_address__dsp_portion__ho_dsp | 0 | 0 | A High-Order Domain-Specific Part of AESA address. The IDP portion determine the format of the HO-DSP. |
| 1.3.6.1.4.1.529.23.1.1.1.339 | internetProfile__atm_connect_options__svc_options__called_addr__aesa_address__dsp_portion__esi | 0 | 0 | An End System Identifier (ESI) which uniquely identifies the end system within the specified subnetwork. |
| 1.3.6.1.4.1.529.23.1.1.1.340 | internetProfile__atm_connect_options__svc_options__called_addr__aesa_address__dsp_portion__sel | 0 | 0 | A selector (SEL) field that may be used by the end system. |
| 1.3.6.1.4.1.529.23.1.1.1.341 | internetProfile__atm_connect_options__svc_options__caller_addr__numbering_plan | 0 | 0 | Numbering plan for an SVC address |
| 1.3.6.1.4.1.529.23.1.1.1.342 | internetProfile__atm_connect_options__svc_options__caller_addr__e164_native_address | 0 | 0 | An SVC address in a native E.164 format. |
| 1.3.6.1.4.1.529.23.1.1.1.343 | internetProfile__atm_connect_options__svc_options__caller_addr__aesa_address__format | 0 | 0 | An AESA address format used to define this SVC address. |
| 1.3.6.1.4.1.529.23.1.1.1.344 | internetProfile__atm_connect_options__svc_options__caller_addr__aesa_address__idp_portion__afi | 0 | 0 | An Authority and Format Identifier(AFI) for AESA address. Must be defined for every AESA address. |
| 1.3.6.1.4.1.529.23.1.1.1.345 | internetProfile__atm_connect_options__svc_options__caller_addr__aesa_address__idp_portion__idi | 0 | 0 | An Initial Domain Identifier (IDI) portion of the AESA address. |
| 1.3.6.1.4.1.529.23.1.1.1.346 | internetProfile__atm_connect_options__svc_options__caller_addr__aesa_address__dsp_portion__ho_dsp | 0 | 0 | A High-Order Domain-Specific Part of AESA address. The IDP portion determine the format of the HO-DSP. |
| 1.3.6.1.4.1.529.23.1.1.1.347 | internetProfile__atm_connect_options__svc_options__caller_addr__aesa_address__dsp_portion__esi | 0 | 0 | An End System Identifier (ESI) which uniquely identifies the end system within the specified subnetwork. |
| 1.3.6.1.4.1.529.23.1.1.1.348 | internetProfile__atm_connect_options__svc_options__caller_addr__aesa_address__dsp_portion__sel | 0 | 0 | A selector (SEL) field that may be used by the end system. |
| 1.3.6.1.4.1.529.23.1.1.1.349 | internetProfile__atm_connect_options__svc_options__insert_calling_party_addr | 0 | 0 | Insert calling party address if one is available during call setup. |
| 1.3.6.1.4.1.529.23.1.1.1.350 | internetProfile__atm_connect_options__svc_options__cdvt_us | 0 | 0 | Cell Delay Variation Tolerance(CDVT) (in microseconds) used to police the requested traffic descriptor. |
| 1.3.6.1.4.1.529.23.1.1.1.351 | internetProfile-AtmConnectOptions-AtmInverseArp, internetProfile__atm_connect_options__atm_inverse_arp | 0 | 0 | Send Atm Inverse Arp request for this connection. |
| 1.3.6.1.4.1.529.23.1.1.1.352 | internetProfile-AtmQosOptions-UsrUpStreamContract, internetProfile__atm_qos_options__usr_up_stream_contract | 0 | 0 | Quality of Service (QOS) contract for user up stream traffic |
| 1.3.6.1.4.1.529.23.1.1.1.353 | internetProfile-AtmQosOptions-UsrDnStreamContract, internetProfile__atm_qos_options__usr_dn_stream_contract | 0 | 0 | Quality of Service (QOS) contract for user down stream traffic |
| ... | ||||