Control the TOS byte of the outer IP header
Parsed from file ASCEND-MIBINET-MIB.mib
Module: ASCEND-MIBINET-MIB
Vendor: Ascend Communications Inc.
Module: ASCEND-MIBINET-MIB
[Automatically extracted from oidview.com]
internetProfile-TunnelOptions-TosCopying OBJECT-TYPE SYNTAX INTEGER { no (1), yes (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Control the TOS byte of the outer IP header" ::= { mibinternetProfileEntry 473 }
To many brothers! Only 100 nearest brothers are shown.
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| ... | ||||
| 1.3.6.1.4.1.529.23.1.1.1.423 | internetProfile-PppOptions-PppCircuitName, internetProfile__ppp_options__ppp_circuit_name | 0 | 0 | The peer datalink identifier for a PPP circuit. |
| 1.3.6.1.4.1.529.23.1.1.1.424 | internetProfile-X32Options-X32ApplMode, internetProfile__x32_options__x32_appl_mode | 0 | 0 | Appl mode for this interface |
| 1.3.6.1.4.1.529.23.1.1.1.425 | internetProfile-CrossConnectIndex, internetProfile__cross_connect_index | 0 | 0 | AToM Mib cross connect index. |
| 1.3.6.1.4.1.529.23.1.1.1.426 | internetProfile-AtmOptions-CastType, internetProfile__atm_options__cast_type | 0 | 0 | The connection topology type. |
| 1.3.6.1.4.1.529.23.1.1.1.427 | internetProfile-AtmOptions-ConnKind, internetProfile__atm_options__conn_kind | 0 | 0 | The use of call control. |
| 1.3.6.1.4.1.529.23.1.1.1.428 | internetProfile-AtmOptions-TargetAtmAddress, internetProfile__atm_options__target_atm_address | 0 | 0 | The target ATM Address of this Soft PVcc or PVpc. |
| 1.3.6.1.4.1.529.23.1.1.1.429 | internetProfile-AtmOptions-TargetSelect, internetProfile__atm_options__target_select | 0 | 0 | Indicates whether the target VPI/VCI values are to be used at the destination. |
| 1.3.6.1.4.1.529.23.1.1.1.430 | internetProfile-AtmOptions-TargetVpi, internetProfile__atm_options__target_vpi | 0 | 0 | Target VPI. |
| 1.3.6.1.4.1.529.23.1.1.1.431 | internetProfile-AtmOptions-TargetVci, internetProfile__atm_options__target_vci | 0 | 0 | Target VCI. |
| 1.3.6.1.4.1.529.23.1.1.1.432 | internetProfile-AtmOptions-AtmCircuitProfile, internetProfile__atm_options__atm_circuit_profile | 0 | 0 | The atm circuit profile name to be used for this connection. |
| 1.3.6.1.4.1.529.23.1.1.1.433 | internetProfile-AtmConnectOptions-CastType, internetProfile__atm_connect_options__cast_type | 0 | 0 | The connection topology type. |
| 1.3.6.1.4.1.529.23.1.1.1.434 | internetProfile-AtmConnectOptions-ConnKind, internetProfile__atm_connect_options__conn_kind | 0 | 0 | The use of call control. |
| 1.3.6.1.4.1.529.23.1.1.1.435 | internetProfile-AtmConnectOptions-TargetAtmAddress, internetProfile__atm_connect_options__target_atm_address | 0 | 0 | The target ATM Address of this Soft PVcc or PVpc. |
| 1.3.6.1.4.1.529.23.1.1.1.436 | internetProfile-AtmConnectOptions-TargetSelect, internetProfile__atm_connect_options__target_select | 0 | 0 | Indicates whether the target VPI/VCI values are to be used at the destination. |
| 1.3.6.1.4.1.529.23.1.1.1.437 | internetProfile-AtmConnectOptions-TargetVpi, internetProfile__atm_connect_options__target_vpi | 0 | 0 | Target VPI. |
| 1.3.6.1.4.1.529.23.1.1.1.438 | internetProfile-AtmConnectOptions-TargetVci, internetProfile__atm_connect_options__target_vci | 0 | 0 | Target VCI. |
| 1.3.6.1.4.1.529.23.1.1.1.439 | internetProfile-AtmConnectOptions-AtmCircuitProfile, internetProfile__atm_connect_options__atm_circuit_profile | 0 | 0 | The atm circuit profile name to be used for this connection. |
| 1.3.6.1.4.1.529.23.1.1.1.440 | internetProfile-AtmAalOptions-AalEnabled, internetProfile__atm_aal_options__aal_enabled | 0 | 0 | Enable the AAl options |
| 1.3.6.1.4.1.529.23.1.1.1.441 | internetProfile-AtmAalOptions-AalType, internetProfile__atm_aal_options__aal_type | 0 | 0 | ATM Adaptation Layer type |
| 1.3.6.1.4.1.529.23.1.1.1.442 | internetProfile-AtmAalOptions-TransmitSduSize, internetProfile__atm_aal_options__transmit_sdu_size | 0 | 0 | Size of the trasmitt Service Data Unit in octets. |
| 1.3.6.1.4.1.529.23.1.1.1.443 | internetProfile-AtmAalOptions-ReceiveSduSize, internetProfile__atm_aal_options__receive_sdu_size | 0 | 0 | Size of the receive Service Data Unit in octets. |
| 1.3.6.1.4.1.529.23.1.1.1.444 | internetProfile-ConnUser, internetProfile__conn_user | 0 | 0 | Connetion User type . |
| 1.3.6.1.4.1.529.23.1.1.1.445 | internetProfile__atm_options__oam_support_f4 | 0 | 0 | Is F4 OAM supported? It is used only when vp-switching is yes. The Stinger system can only support F4 OAM for 50 VPC segments i… |
| 1.3.6.1.4.1.529.23.1.1.1.446 | internetProfile__atm_connect_options__oam_support_f4 | 0 | 0 | Is F4 OAM supported? It is used only when vp-switching is yes. The Stinger system can only support F4 OAM for 50 VPC segments i… |
| 1.3.6.1.4.1.529.23.1.1.1.448 | internetProfile-AtmOptions-SpvcRetryInterval | 0 | 0 | Period to wait before attempting to establish SPVC after the first SPVC setup failure. 0 indicates no retry |
| 1.3.6.1.4.1.529.23.1.1.1.449 | internetProfile-AtmOptions-SpvcRetryThreshold | 0 | 0 | The number of consecutive call setup attempts for the SPVC to fail before the call failure is declared. 0 indicates infinite nu… |
| 1.3.6.1.4.1.529.23.1.1.1.450 | internetProfile-AtmOptions-SpvcRetryLimit | 0 | 0 | Maximum limit on how many consecutive unsuccessful call setup attempts can be made before stopping the attempt to set up the co… |
| 1.3.6.1.4.1.529.23.1.1.1.451 | internetProfile-AtmOptions-OamAisF5 | 0 | 0 | Disable/Enable sending OAM AIS F5 cells when pvc is down. |
| 1.3.6.1.4.1.529.23.1.1.1.452 | internetProfile-AtmOptions-OamSupport | 0 | 0 | Is F4 OAM supported? It is used only when vp-switching is yes. The Stinger system can only support F4 OAM for 50 VPC segments i… |
| 1.3.6.1.4.1.529.23.1.1.1.453 | internetProfile-AtmConnectOptions-SpvcRetryInterval | 0 | 0 | Period to wait before attempting to establish SPVC after the first SPVC setup failure. 0 indicates no retry |
| 1.3.6.1.4.1.529.23.1.1.1.454 | internetProfile-AtmConnectOptions-SpvcRetryThreshold | 0 | 0 | The number of consecutive call setup attempts for the SPVC to fail before the call failure is declared. 0 indicates infinite nu… |
| 1.3.6.1.4.1.529.23.1.1.1.455 | internetProfile-AtmConnectOptions-SpvcRetryLimit | 0 | 0 | Maximum limit on how many consecutive unsuccessful call setup attempts can be made before stopping the attempt to set up the co… |
| 1.3.6.1.4.1.529.23.1.1.1.456 | internetProfile-AtmConnectOptions-OamAisF5 | 0 | 0 | Disable/Enable sending OAM AIS F5 cells when pvc is down. |
| 1.3.6.1.4.1.529.23.1.1.1.457 | internetProfile-AtmConnectOptions-OamSupport | 0 | 0 | Is F4 OAM supported? It is used only when vp-switching is yes. The Stinger system can only support F4 OAM for 50 VPC segments i… |
| 1.3.6.1.4.1.529.23.1.1.1.458 | internetProfile-ModemOnHoldTimeout | 0 | 0 | The allowable Modem-on-Hold timeout values. |
| 1.3.6.1.4.1.529.23.1.1.1.459 | internetProfile-IpOptions-TosOptions-MarkingType | 0 | 0 | Select type of packet marking. |
| 1.3.6.1.4.1.529.23.1.1.1.460 | internetProfile-IpOptions-TosOptions-Dscp | 0 | 0 | DSCP tag to be used in marking of the packets (if marking-type = dscp). |
| 1.3.6.1.4.1.529.23.1.1.1.461 | internetProfile-X25Options-RemoteX25Address | 0 | 0 | X.25 address of remote station. |
| 1.3.6.1.4.1.529.23.1.1.1.462 | internetProfile-X25Options-AnswerX25Address | 0 | 0 | Answer number: mandatory if call mode is incoming or both. |
| 1.3.6.1.4.1.529.23.1.1.1.463 | internetProfile-X25Options-Windowsize | 0 | 0 | Window size requested on outgoing X.25 calls. |
| 1.3.6.1.4.1.529.23.1.1.1.464 | internetProfile-X25Options-Packetsize | 0 | 0 | Packet size requested on outgoing X.25 calls. |
| 1.3.6.1.4.1.529.23.1.1.1.465 | internetProfile-MaxSharedUsers | 0 | 0 | Limits the maximum number of end users allowed to connect using a shared connection profile. The default value is 0 which means… |
| 1.3.6.1.4.1.529.23.1.1.1.468 | internetProfile-AtmOptions-Mtu | 0 | 0 | The maximum packet size (excluding LLC encapsulation if used) that can be transmitted to a remote peer without performing fragm… |
| 1.3.6.1.4.1.529.23.1.1.1.469 | internetProfile-AtmConnectOptions-Mtu | 0 | 0 | The maximum packet size (excluding LLC encapsulation if used) that can be transmitted to a remote peer without performing fragm… |
| 1.3.6.1.4.1.529.23.1.1.1.470 | internetProfile-AtmQosOptions-SubtendingHops | 0 | 0 | Number of hops from which the end-point of this connection originates |
| 1.3.6.1.4.1.529.23.1.1.1.471 | internetProfile-X25Options-X121SourceAddress | 0 | 0 | X.121 address to use to identify this call |
| 1.3.6.1.4.1.529.23.1.1.1.472 | internetProfile-X25Options-PosAuth | 0 | 0 | Use POS Authentication |
| 1.3.6.1.4.1.529.23.1.1.1.474 | internetProfile-IpsecOptions-Enabled | 0 | 0 | IPSec can be disabled on a profile by setting this field to no. |
| 1.3.6.1.4.1.529.23.1.1.1.475 | internetProfile-IpsecOptions-SecurityPolicyDatabase | 0 | 0 | The name of the IPSec SPD profile to be used. |
| 1.3.6.1.4.1.529.23.1.1.1.477 | internetProfile-PriorityOptions-PacketClassification | 0 | 0 | Method used to classify PPP packets. |
| 1.3.6.1.4.1.529.23.1.1.1.478 | internetProfile-PriorityOptions-MaxRtpPacketDelay | 0 | 0 | Maximum delay for RTP packets in milli-seconds. Used for calculating the fragment size for the non-rtp traffic using the same l… |
| 1.3.6.1.4.1.529.23.1.1.1.479 | internetProfile-PriorityOptions-MinimumRtpPort | 0 | 0 | Minimum UDP port for prioritization |
| 1.3.6.1.4.1.529.23.1.1.1.480 | internetProfile-PriorityOptions-MaximumRtpPort | 0 | 0 | Maximum UDP port for prioritization |
| 1.3.6.1.4.1.529.23.1.1.1.481 | internetProfile-PriorityOptions-NoHighPrioPktDuration | 0 | 0 | The number of seconds of no high priority packets before disabling IP fragmentation of low priority packets. The value 0 disabl… |
| 1.3.6.1.4.1.529.23.1.1.1.482 | internetProfile-PriorityOptions-Enabled | 0 | 0 | Enable priority classification. |
| ... | ||||