A mibsS7Profile entry containing objects that
maps to the parameters of mibsS7Profile profile.
Parsed from file ASCEND-MIBSS7NMI-MIB.mib
Module: ASCEND-MIBSS7NMI-MIB
Vendor: Ascend Communications Inc.
Module: ASCEND-MIBSS7NMI-MIB
[Automatically extracted from oidview.com]
mibsS7ProfileEntry OBJECT-TYPE SYNTAX MibsS7ProfileEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A mibsS7Profile entry containing objects that maps to the parameters of mibsS7Profile profile." INDEX { sS7Profile-Index-o } ::= { mibsS7ProfileTable 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.529.23.121.1.1.1 | sS7Profile-Index-o | 0 | 0 | None |
| 1.3.6.1.4.1.529.23.121.1.1.2 | sS7Profile-Enabled | 0 | 0 | When set to 'no', interface to the SS7 gateway is disabled. |
| 1.3.6.1.4.1.529.23.121.1.1.3 | sS7Profile-ControlProtocol | 0 | 0 | Control protocol between the access server and the signaling gateway. |
| 1.3.6.1.4.1.529.23.121.1.1.4 | sS7Profile-PrimaryIpAddress | 0 | 0 | IP address of the primary SS7 gateway. |
| 1.3.6.1.4.1.529.23.121.1.1.5 | sS7Profile-PrimaryTcpPort | 0 | 0 | TCP port on primary SS7 gateway. |
| 1.3.6.1.4.1.529.23.121.1.1.6 | sS7Profile-SecondaryIpAddress | 0 | 0 | IP address of the secondary SS7 gateway. |
| 1.3.6.1.4.1.529.23.121.1.1.7 | sS7Profile-SecondaryTcpPort | 0 | 0 | TCP port on the secondary SS7 gateway. |
| 1.3.6.1.4.1.529.23.121.1.1.8 | sS7Profile-BayId | 0 | 0 | Bay ID defines the bay this device belongs to. Used for registration purposes only. The content of this field is reported to th… |
| 1.3.6.1.4.1.529.23.121.1.1.9 | sS7Profile-SystemType | 0 | 0 | Model ID and/or type of equipment. Used for device registration only. Must be listed in the database on the Gateway. |
| 1.3.6.1.4.1.529.23.121.1.1.10 | sS7Profile-TransportOptions-Type | 0 | 0 | The type of transport layer that is to be used |
| 1.3.6.1.4.1.529.23.121.1.1.11 | sS7Profile-TransportOptions-DeviceId | 0 | 0 | A code that uniquely identifies this device to the Gateway. If multiple remote access servers are configured to use the same si… |
| 1.3.6.1.4.1.529.23.121.1.1.12 | sS7Profile-TransportOptions-T1Duration | 0 | 0 | Value of the ACK delay timer in milliseconds. This timer specifies the maximum delay for an acknowledgement when an I-frame is … |
| 1.3.6.1.4.1.529.23.121.1.1.13 | sS7Profile-TransportOptions-T2Duration | 0 | 0 | Value of the transmission timeout timer in milliseconds. This timer specifies how long this endpoint should wait for an acknowl… |
| 1.3.6.1.4.1.529.23.121.1.1.14 | sS7Profile-TransportOptions-T3Duration | 0 | 0 | Value of the persistent error timer in milliseconds. This timer specifies the maximum duration of attempts to re-establish a li… |
| 1.3.6.1.4.1.529.23.121.1.1.15 | sS7Profile-TransportOptions-WindowSize | 0 | 0 | Maximum number of sequentially numbered data packets that can be sent while pending acknowledgement at any given time. Default … |
| 1.3.6.1.4.1.529.23.121.1.1.16 | sS7Profile-TransportOptions-AckThreshold | 0 | 0 | The threshold for triggering an acknowledgement while receiving data packets. As soon as the specified number of packets is rec… |
| 1.3.6.1.4.1.529.23.121.1.1.17 | sS7Profile-TransportOptions-HeartBeat | 0 | 0 | When set to 'no', layer 2 heartbeat mechanism is not enabled. |
| 1.3.6.1.4.1.529.23.121.1.1.18 | sS7Profile-UseSystemIpAddressAsSource | 0 | 0 | When set to 'yes', use configured System IP Address as source ip address. When set to 'no', use IP Address of outgoing interfac… |
| 1.3.6.1.4.1.529.23.121.1.1.19 | sS7Profile-CongestionControl-CongestionControlType | 0 | 0 | Type of the congestion control algorithm to use. |
| 1.3.6.1.4.1.529.23.121.1.1.20 | sS7Profile-CongestionControl-Cl1Level | 0 | 0 | The level at which 'congestion level 1' indication will be issued. The value is interpreted according to the configured congest… |
| 1.3.6.1.4.1.529.23.121.1.1.21 | sS7Profile-CongestionControl-Cl1Action | 0 | 0 | Action taken when congestion level 1 (defined by the value of cl1-level) is reached. |
| 1.3.6.1.4.1.529.23.121.1.1.22 | sS7Profile-CongestionControl-Cl2Level | 0 | 0 | The level at which 'congestion level 2' indication will be issued. The value is interpreted according to the configured congest… |
| 1.3.6.1.4.1.529.23.121.1.1.23 | sS7Profile-CongestionControl-Cl2Action | 0 | 0 | Action taken when congestion level 2 (defined by the value of cl2-level) is reached. |
| 1.3.6.1.4.1.529.23.121.1.1.24 | sS7Profile-SignalingHeartbeat-Enabled | 0 | 0 | When set to yes, TNT will generate signaling heartbeat to MGC based on the interval configured in signaling-heartbeat interval. |
| 1.3.6.1.4.1.529.23.121.1.1.25 | sS7Profile-SignalingHeartbeat-Interval | 0 | 0 | The time interval in seconds for layer 3 heartbeat messages. |
| 1.3.6.1.4.1.529.23.121.1.1.26 | sS7Profile-Action-o | 0 | 0 | None |
| 1.3.6.1.4.1.529.23.121.1.1.27 | sS7Profile-ResilienceOptions-Type | 0 | 0 | The type of resilience action required when line state changes. |
| 1.3.6.1.4.1.529.23.121.1.1.28 | sS7Profile-ResilienceOptions-Duration | 0 | 0 | The duration in milli seconds for which calls should be maintained when line state changes. Valid only if the type is configure… |
| 1.3.6.1.4.1.529.23.121.1.1.29 | sS7Profile-PriTunnelingOptions-Enabled | 0 | 0 | When set to yes, we will synchronize the d-channel status with the IPDC signaling link state. |
| 1.3.6.1.4.1.529.23.121.1.1.30 | sS7Profile-PriTunnelingOptions-Duration | 0 | 0 | The duration in milliseconds after which bringing down D-channel of tunneled-pri-signaling lines will be initiated. |
| 1.3.6.1.4.1.529.23.121.1.1.32 | sS7Profile-IpdcSourceAdddress | 0 | 0 | IP address to be used on the private network |
| 1.3.6.1.4.1.529.23.121.1.1.33 | sS7Profile-Vrouter | 0 | 0 | Specifies the virtual router to be used. |
| 1.3.6.1.4.1.529.23.121.1.1.34 | sS7Profile-TransportOptions-Tos-Active | 0 | 0 | Activate type of service for this connection. |
| 1.3.6.1.4.1.529.23.121.1.1.35 | sS7Profile-TransportOptions-Tos-Precedence | 0 | 0 | Tag the precedence bits (priority bits) in the TOS octet of IP datagram header with this value when match occurs. |
| 1.3.6.1.4.1.529.23.121.1.1.36 | sS7Profile-TransportOptions-Tos-TypeOfService | 0 | 0 | Tag the type of service field in the TOS octet of IP datagram header with this value when match occurs. |
| 1.3.6.1.4.1.529.23.121.1.1.37 | sS7Profile-TransportOptions-Tos-ApplyTo | 0 | 0 | Define how the type-of-service applies to data flow for this connection. |
| 1.3.6.1.4.1.529.23.121.1.1.38 | sS7Profile-TransportOptions-Tos-MarkingType | 0 | 0 | Select type of packet marking. |
| 1.3.6.1.4.1.529.23.121.1.1.39 | sS7Profile-TransportOptions-Tos-Dscp | 0 | 0 | DSCP tag to be used in marking of the packets (if marking-type = dscp). |