A mibtermSrvProfile entry containing objects that
maps to the parameters of mibtermSrvProfile profile.
Parsed from file ASCEND-MIBTS-MIB.mib
Module: ASCEND-MIBTS-MIB
Vendor: Ascend Communications Inc.
Module: ASCEND-MIBTS-MIB
[Automatically extracted from oidview.com]
mibtermSrvProfileEntry OBJECT-TYPE SYNTAX MibtermSrvProfileEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A mibtermSrvProfile entry containing objects that maps to the parameters of mibtermSrvProfile profile." INDEX { termSrvProfile-Index-o } ::= { mibtermSrvProfileTable 1 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.529.23.133.1.1.1 | termSrvProfile-Index-o | 0 | 0 | None |
1.3.6.1.4.1.529.23.133.1.1.2 | termSrvProfile-Enabled | 0 | 0 | Terminal server availability flag. When set to no all terminal server functions are disabled. |
1.3.6.1.4.1.529.23.133.1.1.3 | termSrvProfile-SecurityMode | 0 | 0 | Indicates the type of terminal server security (if any). |
1.3.6.1.4.1.529.23.133.1.1.4 | termSrvProfile-ModemConfiguration-V42-mnp | 0 | 0 | Describes the modem error correction mode. Error correction can be required, not used, or optional. |
1.3.6.1.4.1.529.23.133.1.1.5 | termSrvProfile-ModemConfiguration-MaxBaudRate | 0 | 0 | Describes the maximum connection baud rate the modems should try. |
1.3.6.1.4.1.529.23.133.1.1.6 | termSrvProfile-ModemConfiguration-ModemTransmitLevel | 0 | 0 | The transmit attenuate level the modems should try. |
1.3.6.1.4.1.529.23.133.1.1.7 | termSrvProfile-ModemConfiguration-CellModeFirst | 0 | 0 | If yes, the modem attempts cellular connection first - then land connection. If no, land based is attempted first, then cellula… |
1.3.6.1.4.1.529.23.133.1.1.8 | termSrvProfile-ModemConfiguration-CellLevel | 0 | 0 | The modem cellular communications transmit and receive level. Valid values are -10 db .. -18 db. |
1.3.6.1.4.1.529.23.133.1.1.9 | termSrvProfile-ModemConfiguration-o7Even | 0 | 0 | If set to yes, all incoming data has its parity bit cleared and all outgoing data is forced to 7 bits with even parity. |
1.3.6.1.4.1.529.23.133.1.1.10 | termSrvProfile-ModemConfiguration-ModemMod | 0 | 0 | The modulation protocol to be attempted by the modems. |
1.3.6.1.4.1.529.23.133.1.1.11 | termSrvProfile-ModemConfiguration-oATAnswerString | 0 | 0 | Allows the user to enter any additional AT commands in the modem answer string. |
1.3.6.1.4.1.529.23.133.1.1.12 | termSrvProfile-TerminalModeConfiguration-SilentMode | 0 | 0 | Don't generate any status messages upon connection. |
1.3.6.1.4.1.529.23.133.1.1.13 | termSrvProfile-TerminalModeConfiguration-ClearScreen | 0 | 0 | Clear the screen at terminal server startup. |
1.3.6.1.4.1.529.23.133.1.1.14 | termSrvProfile-TerminalModeConfiguration-SystemPassword | 0 | 0 | Global terminal server system access password. |
1.3.6.1.4.1.529.23.133.1.1.15 | termSrvProfile-TerminalModeConfiguration-Banner | 0 | 0 | The terminal server login banner. |
1.3.6.1.4.1.529.23.133.1.1.16 | termSrvProfile-TerminalModeConfiguration-LoginPrompt | 0 | 0 | The string used to prompt for user name when authentication is in use. |
1.3.6.1.4.1.529.23.133.1.1.17 | termSrvProfile-TerminalModeConfiguration-PasswordPrompt | 0 | 0 | The string used to prompt for password when authentication is in use. |
1.3.6.1.4.1.529.23.133.1.1.18 | termSrvProfile-TerminalModeConfiguration-ThirdLoginPrompt | 0 | 0 | An optional third prompt for a terminal server login. If this value is null no third prompt is used. |
1.3.6.1.4.1.529.23.133.1.1.19 | termSrvProfile-TerminalModeConfiguration-ThirdPromptSequence | 0 | 0 | Select where the third prompt should appear in the login sequence: either before or after user name & password. |
1.3.6.1.4.1.529.23.133.1.1.20 | termSrvProfile-TerminalModeConfiguration-Prompt | 0 | 0 | The current terminal server prompt. |
1.3.6.1.4.1.529.23.133.1.1.21 | termSrvProfile-TerminalModeConfiguration-TerminalType | 0 | 0 | The default terminal type for telnet and rlogin sessions. |
1.3.6.1.4.1.529.23.133.1.1.22 | termSrvProfile-TerminalModeConfiguration-ClearCall | 0 | 0 | Select operation when a telnet/rlogin/tcp session terminates. When set to yes, the dial-in session will also terminate. |
1.3.6.1.4.1.529.23.133.1.1.23 | termSrvProfile-TerminalModeConfiguration-BufferChars | 0 | 0 | Whether to buffer termserv characters or to forward them without buffering. Buffering provides better throughput at a slight in… |
1.3.6.1.4.1.529.23.133.1.1.24 | termSrvProfile-TerminalModeConfiguration-Ping | 0 | 0 | Enable/disable the ping command from the terminal server. |
1.3.6.1.4.1.529.23.133.1.1.25 | termSrvProfile-TerminalModeConfiguration-Traceroute | 0 | 0 | Enable/disable the traceroute command from the terminal server. |
1.3.6.1.4.1.529.23.133.1.1.26 | termSrvProfile-TerminalModeConfiguration-Tcp | 0 | 0 | Enable/disable the tcp command from the terminal server. |
1.3.6.1.4.1.529.23.133.1.1.27 | termSrvProfile-TerminalModeConfiguration-TsAraEnabled | 0 | 0 | TRUE if terminal server users are allowed to intiate async ARA sessions. |
1.3.6.1.4.1.529.23.133.1.1.28 | termSrvProfile-TerminalModeConfiguration-RloginOptions-Rlogin | 0 | 0 | Enable/disable the rlogin command from the terminal server. |
1.3.6.1.4.1.529.23.133.1.1.29 | termSrvProfile-TerminalModeConfiguration-RloginOptions-MaxSourcePort | 0 | 0 | A highest limit of the port number used by rlogin. For BSD's rlogin, the client source port range is 512 to 1023. |
1.3.6.1.4.1.529.23.133.1.1.30 | termSrvProfile-TerminalModeConfiguration-RloginOptions-MinSourcePort | 0 | 0 | A lowest limit of the port number used by rlogin. For BSD's rlogin, the client source port range is 512 to 1023. |
1.3.6.1.4.1.529.23.133.1.1.31 | termSrvProfile-TerminalModeConfiguration-TelnetOptions-Telnet | 0 | 0 | Enable/disable the use of the telnet terminal server command. |
1.3.6.1.4.1.529.23.133.1.1.32 | termSrvProfile-TerminalModeConfiguration-TelnetOptions-TelnetMode | 0 | 0 | Selects default Telnet mode: ASCII, Binary, or Transparent. |
1.3.6.1.4.1.529.23.133.1.1.33 | termSrvProfile-TerminalModeConfiguration-TelnetOptions-AutoTelnet | 0 | 0 | If set to 'yes' unknown terminal server commands will be treated as the name of a host to telnet to. |
1.3.6.1.4.1.529.23.133.1.1.34 | termSrvProfile-TerminalModeConfiguration-TelnetOptions-LocalEcho | 0 | 0 | Defines the default echo mode for telnet sessions. The default mode can be overridded on the command line. |
1.3.6.1.4.1.529.23.133.1.1.35 | termSrvProfile-TerminalModeConfiguration-TelnetOptions-Security | 0 | 0 | Level of security used to authenticate telnet sessions. |
1.3.6.1.4.1.529.23.133.1.1.36 | termSrvProfile-TerminalModeConfiguration-IpAddMsg | 0 | 0 | This is a text field that will be printed in front of the IP address in the terminal server when going into PPP. |
1.3.6.1.4.1.529.23.133.1.1.37 | termSrvProfile-TerminalModeConfiguration-PromptFormat | 0 | 0 | TRUE if the terminal server prompt should interpret \\n. |
1.3.6.1.4.1.529.23.133.1.1.38 | termSrvProfile-TerminalModeConfiguration-IpNetmaskMsg | 0 | 0 | This is a text field that will be printed in front of the IP Netmask in the terminal server when going into SLIP. |
1.3.6.1.4.1.529.23.133.1.1.39 | termSrvProfile-TerminalModeConfiguration-IpGwAddMsg | 0 | 0 | This is a text field that will be printed in front of the IP Gateway address in the terminal server when going into SLIP. |
1.3.6.1.4.1.529.23.133.1.1.40 | termSrvProfile-TerminalModeConfiguration-LoginTimeout | 0 | 0 | The number of seconds to wait at the login prompt for the user to login. A value of 0 disables the timeout. |
1.3.6.1.4.1.529.23.133.1.1.41 | termSrvProfile-TerminalModeConfiguration-PacketizeWaitTime | 0 | 0 | The number of milliseconds to accumulate modem data in a packet. |
1.3.6.1.4.1.529.23.133.1.1.42 | termSrvProfile-TerminalModeConfiguration-PacketizeChars | 0 | 0 | The number of characters to accumulate modem data in a packet. |
1.3.6.1.4.1.529.23.133.1.1.43 | termSrvProfile-ImmediateModeOptions-Service | 0 | 0 | enable/disable immediate mode and specify the service type. Immediate mode is where a user is automatically connected to a remo… |
1.3.6.1.4.1.529.23.133.1.1.44 | termSrvProfile-ImmediateModeOptions-TelnetHostAuth | 0 | 0 | Option defines if telnet is started directly bypassing the local authentication process. When enabled, authentication is the re… |
1.3.6.1.4.1.529.23.133.1.1.45 | termSrvProfile-ImmediateModeOptions-Host | 0 | 0 | Name or IP address or X.121 address of the immediate TELNET, TCP, or X.25/Pad host to connect to. |
1.3.6.1.4.1.529.23.133.1.1.46 | termSrvProfile-ImmediateModeOptions-Port | 0 | 0 | TCP port to which the TELNET or TCP stream is to be redirected to. |
1.3.6.1.4.1.529.23.133.1.1.47 | termSrvProfile-MenuModeOptions-StartWithMenus | 0 | 0 | Terminal server interface will start in menu mode when this field is 'yes'. |
1.3.6.1.4.1.529.23.133.1.1.48 | termSrvProfile-MenuModeOptions-ToggleScreen | 0 | 0 | When enabled, users are able to toggle between menu mode and the normal terminal server command line. |
1.3.6.1.4.1.529.23.133.1.1.49 | termSrvProfile-MenuModeOptions-RemoteConfiguration | 0 | 0 | When enabled, the text and host addresses that make up the menu will be retrieved from RADIUS (if RADIUS is enabled). |
1.3.6.1.4.1.529.23.133.1.1.50 | termSrvProfile-MenuModeOptions-Text1 | 0 | 0 | The text to put in the terminal server menu for the first login host when remote configuration isn't available. |
1.3.6.1.4.1.529.23.133.1.1.51 | termSrvProfile-MenuModeOptions-Host1 | 0 | 0 | The address of the first host to access when terminal server menu mode is being used without remote configuration. |
1.3.6.1.4.1.529.23.133.1.1.52 | termSrvProfile-MenuModeOptions-Service1 | 0 | 0 | Type of service required for this selection. |
1.3.6.1.4.1.529.23.133.1.1.53 | termSrvProfile-MenuModeOptions-Port1 | 0 | 0 | The port for contacting host. Used only for telnet service. |
1.3.6.1.4.1.529.23.133.1.1.54 | termSrvProfile-MenuModeOptions-User1 | 0 | 0 | The user name for this selection. Used only for rlogin service. |
1.3.6.1.4.1.529.23.133.1.1.55 | termSrvProfile-MenuModeOptions-Text2 | 0 | 0 | The text to put in the terminal server menu for the second login host when remote configuration isn't available. |
1.3.6.1.4.1.529.23.133.1.1.56 | termSrvProfile-MenuModeOptions-Host2 | 0 | 0 | The address of the second host to access when terminal server menu mode is being used without remote configuration. |
1.3.6.1.4.1.529.23.133.1.1.57 | termSrvProfile-MenuModeOptions-Service2 | 0 | 0 | Type of service required for this selection. |
1.3.6.1.4.1.529.23.133.1.1.58 | termSrvProfile-MenuModeOptions-Port2 | 0 | 0 | The port for contacting host. Used only for telnet service. |
1.3.6.1.4.1.529.23.133.1.1.59 | termSrvProfile-MenuModeOptions-User2 | 0 | 0 | The user name for this selection. Used only for rlogin service. |
1.3.6.1.4.1.529.23.133.1.1.60 | termSrvProfile-MenuModeOptions-Text3 | 0 | 0 | The text to put in the terminal server menu for the third login host when remote configuration isn't available. |
1.3.6.1.4.1.529.23.133.1.1.61 | termSrvProfile-MenuModeOptions-Host3 | 0 | 0 | The address of the third host to access when terminal server menu mode is being used without remote configuration. |
1.3.6.1.4.1.529.23.133.1.1.62 | termSrvProfile-MenuModeOptions-Service3 | 0 | 0 | Type of service required for this selection. |
1.3.6.1.4.1.529.23.133.1.1.63 | termSrvProfile-MenuModeOptions-Port3 | 0 | 0 | The port for contacting host. Used only for telnet service. |
1.3.6.1.4.1.529.23.133.1.1.64 | termSrvProfile-MenuModeOptions-User3 | 0 | 0 | The user name for this selection. Used only for rlogin service. |
1.3.6.1.4.1.529.23.133.1.1.65 | termSrvProfile-MenuModeOptions-Text4 | 0 | 0 | The text to put in the terminal server menu for the forth login host when remote configuration isn't available. |
1.3.6.1.4.1.529.23.133.1.1.66 | termSrvProfile-MenuModeOptions-Host4 | 0 | 0 | The address of the forth host to access when terminal server menu mode is being used without remote configuration. |
1.3.6.1.4.1.529.23.133.1.1.67 | termSrvProfile-MenuModeOptions-Service4 | 0 | 0 | Type of service required for this selection. |
1.3.6.1.4.1.529.23.133.1.1.68 | termSrvProfile-MenuModeOptions-Port4 | 0 | 0 | The port for contacting host. Used only for telnet service. |
1.3.6.1.4.1.529.23.133.1.1.69 | termSrvProfile-MenuModeOptions-User4 | 0 | 0 | The user name for this selection. Used only for rlogin service. |
1.3.6.1.4.1.529.23.133.1.1.70 | termSrvProfile-MenuModeOptions-MenuSelectionString | 0 | 0 | The selection string for the menu mode. |
1.3.6.1.4.1.529.23.133.1.1.71 | termSrvProfile-PppModeConfiguration-Ppp | 0 | 0 | Enable/disable the PPP terminal server command. |
1.3.6.1.4.1.529.23.133.1.1.72 | termSrvProfile-PppModeConfiguration-Delay | 0 | 0 | The number of seconds to wait for PPP before putting up the login banner and converting to telnet mode. |
1.3.6.1.4.1.529.23.133.1.1.73 | termSrvProfile-PppModeConfiguration-Direct | 0 | 0 | Option defines if PPP negotiation is started directly after 'PPP' Term Server command is received or, not. When disabled, we wa… |
1.3.6.1.4.1.529.23.133.1.1.74 | termSrvProfile-PppModeConfiguration-Info | 0 | 0 | Enable/Disable the PPP/SLIP start up message. |
1.3.6.1.4.1.529.23.133.1.1.75 | termSrvProfile-SlipModeConfiguration-Slip | 0 | 0 | Enable/disable the SLIP command from the terminal server. |
1.3.6.1.4.1.529.23.133.1.1.76 | termSrvProfile-SlipModeConfiguration-SlipBootp | 0 | 0 | Enable/disable the SLIP command from the terminal server. |
1.3.6.1.4.1.529.23.133.1.1.77 | termSrvProfile-SlipModeConfiguration-Info | 0 | 0 | Level of information displayed in SLIP start up message. |
1.3.6.1.4.1.529.23.133.1.1.78 | termSrvProfile-SlipModeConfiguration-CslipAutoDetect | 0 | 0 | Enable/disbale auto detecting of SLIP header compression. This feature will try to auto-detect if the caller is using Van Jacob… |
1.3.6.1.4.1.529.23.133.1.1.79 | termSrvProfile-DialoutConfiguration-Enabled | 0 | 0 | Allow/disallow modem outdial from the terminal server. |
1.3.6.1.4.1.529.23.133.1.1.80 | termSrvProfile-DialoutConfiguration-DirectAccess | 0 | 0 | Allows direct connection to a modem by TELNETing to a configurable modem port. |
1.3.6.1.4.1.529.23.133.1.1.81 | termSrvProfile-DialoutConfiguration-PortForDirectAccess | 0 | 0 | The telnet port number for direct access to a modem. |
1.3.6.1.4.1.529.23.133.1.1.82 | termSrvProfile-DialoutConfiguration-PasswordForDirectAccess | 0 | 0 | The password that must be used to gain direct access to a modem |
1.3.6.1.4.1.529.23.133.1.1.83 | termSrvProfile-DialoutConfiguration-SecurityForDirectAccess | 0 | 0 | The security method used to control direct modem access. |
1.3.6.1.4.1.529.23.133.1.1.84 | termSrvProfile-Action-o | 0 | 0 | None |
1.3.6.1.4.1.529.23.133.1.1.85 | termSrvProfile-ModemConfiguration-ModemOnHoldTimeout | 0 | 0 | The allowable Modem-on-Hold timeout values. |
1.3.6.1.4.1.529.23.133.1.1.86 | termSrvProfile-ModemConfiguration-QuickConnectEnabled | 0 | 0 | If set to yes, Quick-Connect will be enabled. |
1.3.6.1.4.1.529.23.133.1.1.87 | termSrvProfile-ModemConfiguration-MaxV92ReceiveBaudRate | 0 | 0 | The maximum V.92 receive baud rate to be attempted by the modems. |
1.3.6.1.4.1.529.23.133.1.1.88 | termSrvProfile-ModemConfiguration-V44Enabled | 0 | 0 | If set to yes, allow V.44 compression to be negotiated |