Vendor: Ascend Communications Inc.
Module: ASCEND-MIBX25-MIB
[Automatically extracted from oidview.com]
x25Profile-Action-o OBJECT-TYPE SYNTAX INTEGER { noAction (1), createProfile (2), deleteProfile (3) } ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { mibx25ProfileEntry 44 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.529.23.140.1.1.1 | x25Profile-X25Name | 0 | 0 | Name of the X.25 profile. |
| 1.3.6.1.4.1.529.23.140.1.1.2 | x25Profile-Active | 0 | 0 | Indicates whether this profile is to be included in the X.25 table. |
| 1.3.6.1.4.1.529.23.140.1.1.3 | x25Profile-Kludge | 0 | 0 | This is a kludge to indicate that the physical line is to be brought down before connecting. It is also used for outsequence on… |
| 1.3.6.1.4.1.529.23.140.1.1.4 | x25Profile-NailedUpGroup | 0 | 0 | Specifies the nailed group number. |
| 1.3.6.1.4.1.529.23.140.1.1.5 | x25Profile-NailedMode | 0 | 0 | Specifies whether it is a nailed or switched. |
| 1.3.6.1.4.1.529.23.140.1.1.6 | x25Profile-CalledNumberType | 0 | 0 | Indication of whether national national number, international number, etc. is specified. |
| 1.3.6.1.4.1.529.23.140.1.1.7 | x25Profile-SwitchedCallType | 0 | 0 | Type of bearer channel capability to set up for each switched call in the session. |
| 1.3.6.1.4.1.529.23.140.1.1.8 | x25Profile-PhoneNumber | 0 | 0 | The phonenumber of the named host. |
| 1.3.6.1.4.1.529.23.140.1.1.9 | x25Profile-BillingNumber | 0 | 0 | A number used for billing purposes. |
| 1.3.6.1.4.1.529.23.140.1.1.10 | x25Profile-TransitNumber | 0 | 0 | The string for use in the 'transit network ie' for PRI calling when going through a LEC. |
| 1.3.6.1.4.1.529.23.140.1.1.11 | x25Profile-CallByCallId | 0 | 0 | Id for the call-by-call signalling for PRI. |
| 1.3.6.1.4.1.529.23.140.1.1.12 | x25Profile-oT1Val | 0 | 0 | The time interval during which the LAPB shall expect to receive an acknowledgment to an outstanding I PDU or an expected respon… |
| 1.3.6.1.4.1.529.23.140.1.1.13 | x25Profile-oT2Val | 0 | 0 | The maximum delay at LAPB before transmitting a delayed RR. This must be considerably less than T1 the Acknowledgment Timer val… |
| 1.3.6.1.4.1.529.23.140.1.1.14 | x25Profile-oN2Val | 0 | 0 | Maximum number of times that a PDU is sent following the expiry of the Acknowledgment Timer. |
| 1.3.6.1.4.1.529.23.140.1.1.15 | x25Profile-KVal | 0 | 0 | LAPB Window size specifying the number of unacknowledged I PDUs which may be sent. |
| 1.3.6.1.4.1.529.23.140.1.1.16 | x25Profile-oPktWindow | 0 | 0 | X.25 Packet Window size. |
| 1.3.6.1.4.1.529.23.140.1.1.17 | x25Profile-oPktSize | 0 | 0 | X.25 default Packet size. |
| 1.3.6.1.4.1.529.23.140.1.1.18 | x25Profile-oMinPktSize | 0 | 0 | X.25 log base 2 of min packet size in negotiation. |
| 1.3.6.1.4.1.529.23.140.1.1.19 | x25Profile-oMaxPktSize | 0 | 0 | Maximum X.25 Packet size which will be negotiated on calls. |
| 1.3.6.1.4.1.529.23.140.1.1.20 | x25Profile-LowestPVC | 0 | 0 | X.25 logical channel number assigned to the lowest PVC. |
| 1.3.6.1.4.1.529.23.140.1.1.21 | x25Profile-HighestPVC | 0 | 0 | X.25 logical channel number assigned to the highest PVC. |
| 1.3.6.1.4.1.529.23.140.1.1.22 | x25Profile-LowestSVC | 0 | 0 | X.25 logical channel number assigned to the lowest SVC. |
| 1.3.6.1.4.1.529.23.140.1.1.23 | x25Profile-HighestSVC | 0 | 0 | X.25 logical channel number assigned to the highest SVC. |
| 1.3.6.1.4.1.529.23.140.1.1.24 | x25Profile-ClearDiag | 0 | 0 | X.25 Clear request has DIAG. |
| 1.3.6.1.4.1.529.23.140.1.1.25 | x25Profile-ResetDiag | 0 | 0 | X.25 reset request has DIAG. |
| 1.3.6.1.4.1.529.23.140.1.1.26 | x25Profile-RestartDiag | 0 | 0 | X.25 restart request has DIAG. |
| 1.3.6.1.4.1.529.23.140.1.1.27 | x25Profile-PktOptions | 0 | 0 | X.25 packet level options. |
| 1.3.6.1.4.1.529.23.140.1.1.28 | x25Profile-PktT20 | 0 | 0 | X.25 restart request response timer. |
| 1.3.6.1.4.1.529.23.140.1.1.29 | x25Profile-PktR20 | 0 | 0 | Number of times an X.25 restart request will be retried. |
| 1.3.6.1.4.1.529.23.140.1.1.30 | x25Profile-PktT21 | 0 | 0 | X.25 call request response timer. |
| 1.3.6.1.4.1.529.23.140.1.1.31 | x25Profile-PktT22 | 0 | 0 | X.25 reset request response timer. |
| 1.3.6.1.4.1.529.23.140.1.1.32 | x25Profile-PktR22 | 0 | 0 | Number of times an X.25 reset request will be retried. |
| 1.3.6.1.4.1.529.23.140.1.1.33 | x25Profile-PktT23 | 0 | 0 | X.25 clear request response timer. |
| 1.3.6.1.4.1.529.23.140.1.1.34 | x25Profile-PktR23 | 0 | 0 | Number of times an X.25 clear request will be retried. |
| 1.3.6.1.4.1.529.23.140.1.1.36 | x25Profile-DteFlag | 0 | 0 | Indicates the DTE/DCE nature of the X.25 protocol. |
| 1.3.6.1.4.1.529.23.140.1.1.37 | x25Profile-NetType | 0 | 0 | Net Type Enum |
| 1.3.6.1.4.1.529.23.140.1.1.38 | x25Profile-oDiscMode | 0 | 0 | Disc Mode: Active or passive |
| 1.3.6.1.4.1.529.23.140.1.1.39 | x25Profile-oSeqNumbers | 0 | 0 | Sequence numbers mode: normal or extended |
| 1.3.6.1.4.1.529.23.140.1.1.40 | x25Profile-ReverseChargeAcceptance | 0 | 0 | Reverse Charge Acceptance if set permits the use of reverse charges on Incoming Call packets. |
| 1.3.6.1.4.1.529.23.140.1.1.41 | x25Profile-oVceTimerVal | 0 | 0 | Virtual Call Establishment Timer Interval: number of seconds to maintain a connection to a character oriented device that has n… |
| 1.3.6.1.4.1.529.23.140.1.1.42 | x25Profile-oX25DTeiValue | 0 | 0 | TEI to be used when D-channel X.25 |
| 1.3.6.1.4.1.529.23.140.1.1.43 | x25Profile-oPriNumberValue | 0 | 0 | Phone number to be used for BAP |
| 1.3.6.1.4.1.529.23.140.1.1.45 | x25Profile-IdleVal | 0 | 0 | Timer used to poll the the remote LAPB when there is no activity on the link to ensure the remote station is still alive. A val… |
| 1.3.6.1.4.1.529.23.140.1.1.46 | x25Profile-Maxwinsize | 0 | 0 | Maximum X.25 Window size which will be negotiated on calls. |
| 1.3.6.1.4.1.529.23.140.1.1.47 | x25Profile-Defwinsize | 0 | 0 | Default X.25 Window size to use if not specified during call establishment. |
| 1.3.6.1.4.1.529.23.140.1.1.48 | x25Profile-Defpktsize | 0 | 0 | Default X.25 Packet size to use if not specified during call establishment. |
| 1.3.6.1.4.1.529.23.140.1.1.49 | x25Profile-Pktdiag | 0 | 0 | Incoming Restart, Clear and Reset Indications will contain the diagnostic byte |
| 1.3.6.1.4.1.529.23.140.1.1.50 | x25Profile-X25SrcAddress | 0 | 0 | X.25 source address |
| 1.3.6.1.4.1.529.23.140.1.1.51 | x25Profile-ClosedUserGroups | 0 | 0 | Type of Closed User Group facilities subscribed to. |