Authenticate CLID using this password.
Parsed from file ASCEND-MIBXAUTH-MIB.mib
Module: ASCEND-MIBXAUTH-MIB
Vendor: Ascend Communications Inc.
Module: ASCEND-MIBXAUTH-MIB
[Automatically extracted from oidview.com]
externalAuthProfile-Clid OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Authenticate CLID using this password." ::= { mibexternalAuthProfileEntry 95 }
To many brothers! Only 100 nearest brothers are shown.
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
... | ||||
1.3.6.1.4.1.529.23.142.1.1.45 | externalAuthProfile-RadAcctClient-AcctLimitRetry | 0 | 0 | Number of retries before removing RADIUS Acct packet. 0 means leave on retry list until maximum retry entries are exceeded. |
1.3.6.1.4.1.529.23.142.1.1.46 | externalAuthProfile-RadAcctClient-AcctDropStopOnAuthFail | 0 | 0 | If Yes, do not send RADIUS Accounting Stop/Checkpoint packets for users that failed authentication. |
1.3.6.1.4.1.529.23.142.1.1.47 | externalAuthProfile-RadAcctClient-AcctRadiusCompat | 0 | 0 | Accounting RADIUS compatibility mode. |
1.3.6.1.4.1.529.23.142.1.1.48 | externalAuthProfile-RadAcctClient-TunnelAccounting | 0 | 0 | Perform RFC2867 Radius Tunnel Accounting ( L2F, L2TP ). |
1.3.6.1.4.1.529.23.142.1.1.49 | externalAuthProfile-RadAuthServer-AuthPort | 0 | 0 | The UDP port to use for the on-board RADIUS server. |
1.3.6.1.4.1.529.23.142.1.1.50 | externalAuthProfile-RadAuthServer-AuthSessionKey | 0 | 0 | Enables Session key assignments. |
1.3.6.1.4.1.529.23.142.1.1.51 | externalAuthProfile-RadAuthServer-AuthAttributeType | 0 | 0 | The type of attributes required for session matching. |
1.3.6.1.4.1.529.23.142.1.1.52 | externalAuthProfile-RadAuthServer-AuthRadiusCompat | 0 | 0 | RADIUS server RADIUS compatibility mode. |
1.3.6.1.4.1.529.23.142.1.1.53 | externalAuthProfile-TacAuthClient-AuthServer1 | 0 | 0 | The IP address of the first TACACS authentication server. |
1.3.6.1.4.1.529.23.142.1.1.54 | externalAuthProfile-TacAuthClient-AuthServer2 | 0 | 0 | The IP address of the second TACACS authentication server. |
1.3.6.1.4.1.529.23.142.1.1.55 | externalAuthProfile-TacAuthClient-AuthServer3 | 0 | 0 | The IP address of the third TACACS authentication server. |
1.3.6.1.4.1.529.23.142.1.1.56 | externalAuthProfile-TacAuthClient-AuthPort | 0 | 0 | The UDP port to use for TACACS authentication. |
1.3.6.1.4.1.529.23.142.1.1.57 | externalAuthProfile-TacAuthClient-AuthSrcPort | 0 | 0 | The UDP source port to use for TACACS authentication. If zero, the source port is selected from the non-privileged port range (… |
1.3.6.1.4.1.529.23.142.1.1.58 | externalAuthProfile-TacAuthClient-AuthKey | 0 | 0 | The RADIUS authentication access key shared with the RADIUS server. |
1.3.6.1.4.1.529.23.142.1.1.59 | externalAuthProfile-TacAuthClient-AuthTimeout | 0 | 0 | externalAuthProfile-TacAuthClient-Authtimeout |
1.3.6.1.4.1.529.23.142.1.1.60 | externalAuthProfile-TacplusAuthClient-AuthServer1 | 0 | 0 | The IP address of the first TACACS+ authentication server. |
1.3.6.1.4.1.529.23.142.1.1.61 | externalAuthProfile-TacplusAuthClient-AuthServer2 | 0 | 0 | The IP address of the second TACACS+ authentication server. |
1.3.6.1.4.1.529.23.142.1.1.62 | externalAuthProfile-TacplusAuthClient-AuthServer3 | 0 | 0 | The IP address of the third TACACS+ authentication server. |
1.3.6.1.4.1.529.23.142.1.1.63 | externalAuthProfile-TacplusAuthClient-AuthPort | 0 | 0 | The TCP destination port to use for TACACS+ authentication. |
1.3.6.1.4.1.529.23.142.1.1.64 | externalAuthProfile-TacplusAuthClient-AuthSrcPort | 0 | 0 | The TCP source port to use for TACACS+ authentication. If zero, the source port is selected from the non-privileged port range … |
1.3.6.1.4.1.529.23.142.1.1.65 | externalAuthProfile-TacplusAuthClient-AuthKey | 0 | 0 | The Tacacs+ authentication access key shared with the TACACS+ server. |
1.3.6.1.4.1.529.23.142.1.1.66 | externalAuthProfile-TacplusAuthClient-AuthTimeoutTime | 0 | 0 | externalAuthProfile-TacplusAuthClient-AuthtimeoutTime |
1.3.6.1.4.1.529.23.142.1.1.67 | externalAuthProfile-TacplusAuthClient-AuthRetries | 0 | 0 | The number of times to retry the auth hosts before giving up. |
1.3.6.1.4.1.529.23.142.1.1.68 | externalAuthProfile-TacplusAcctClient-AcctServer1 | 0 | 0 | The IP address of the first TACACS+ accounting server. |
1.3.6.1.4.1.529.23.142.1.1.69 | externalAuthProfile-TacplusAcctClient-AcctServer2 | 0 | 0 | The IP address of the second TACACS+ accounting server. |
1.3.6.1.4.1.529.23.142.1.1.70 | externalAuthProfile-TacplusAcctClient-AcctServer3 | 0 | 0 | The IP address of the third TACACS+ accounting server. |
1.3.6.1.4.1.529.23.142.1.1.71 | externalAuthProfile-TacplusAcctClient-AcctPort | 0 | 0 | The TCP destination port to use for TACACS+ accounting. |
1.3.6.1.4.1.529.23.142.1.1.72 | externalAuthProfile-TacplusAcctClient-AcctSrcPort | 0 | 0 | The TCP source port to use for TACACS+ accounting. If zero, the source port is selected from the non-privileged port range (102… |
1.3.6.1.4.1.529.23.142.1.1.73 | externalAuthProfile-TacplusAcctClient-AcctKey | 0 | 0 | The TACACS+ accounting access key shared with the TACACS+ server. |
1.3.6.1.4.1.529.23.142.1.1.74 | externalAuthProfile-SecureidAuthClient-AuthServer1 | 0 | 0 | The IP address of the first authentication server. |
1.3.6.1.4.1.529.23.142.1.1.75 | externalAuthProfile-SecureidAuthClient-AuthServer2 | 0 | 0 | The IP address of the second authentication server. |
1.3.6.1.4.1.529.23.142.1.1.76 | externalAuthProfile-SecureidAuthClient-AuthServer3 | 0 | 0 | The IP address of the third authentication server. |
1.3.6.1.4.1.529.23.142.1.1.77 | externalAuthProfile-SecureidAuthClient-AuthPort | 0 | 0 | The UDP destination port to use for authentication. |
1.3.6.1.4.1.529.23.142.1.1.78 | externalAuthProfile-SecureidAuthClient-AuthTimeout | 0 | 0 | externalAuthProfile-SecureidAuthClient-Authtimeout |
1.3.6.1.4.1.529.23.142.1.1.79 | externalAuthProfile-SecureidAuthClient-AuthRetrycount | 0 | 0 | Number of times to retry an authentication attempt. |
1.3.6.1.4.1.529.23.142.1.1.80 | externalAuthProfile-SecureidAuthClient-AuthDes | 0 | 0 | Use DES encryption instead of native encryption. |
1.3.6.1.4.1.529.23.142.1.1.81 | externalAuthProfile-SecureidAuthClient-AuthNodeSecret | 0 | 0 | node secret assigned to this router, hexadecimal notation. |
1.3.6.1.4.1.529.23.142.1.1.82 | externalAuthProfile-PasswordProfile-Clid | 0 | 0 | This is the password for the CLID pseudo user. |
1.3.6.1.4.1.529.23.142.1.1.83 | externalAuthProfile-PasswordProfile-Dnis | 0 | 0 | This is the password for the DNIS pseudo user. |
1.3.6.1.4.1.529.23.142.1.1.84 | externalAuthProfile-PasswordProfile-Banner | 0 | 0 | This is the password for the Banner pseudo user. |
1.3.6.1.4.1.529.23.142.1.1.85 | externalAuthProfile-PasswordProfile-InitBanner | 0 | 0 | Authenticate DNIS using this password. |
1.3.6.1.4.1.529.23.142.1.1.86 | externalAuthProfile-PasswordProfile-Pool | 0 | 0 | This is the password for the POOLs pseudo user. |
1.3.6.1.4.1.529.23.142.1.1.87 | externalAuthProfile-PasswordProfile-Frdl | 0 | 0 | This is the password for the Frame Relay pseudo user. |
1.3.6.1.4.1.529.23.142.1.1.88 | externalAuthProfile-PasswordProfile-Dialout | 0 | 0 | This is the password for the Dialout pseudo user. |
1.3.6.1.4.1.529.23.142.1.1.89 | externalAuthProfile-PasswordProfile-DialoutRoutes | 0 | 0 | This is the password for the Dialout Routes pseudo user. |
1.3.6.1.4.1.529.23.142.1.1.90 | externalAuthProfile-PasswordProfile-DialoutIpxRoutes | 0 | 0 | This is the password for the Dialout IPX pseudo user. |
1.3.6.1.4.1.529.23.142.1.1.91 | externalAuthProfile-PasswordProfile-DialoutAtalkRoutes | 0 | 0 | This is the password for the Dialout Appletalk pseudo user. |
1.3.6.1.4.1.529.23.142.1.1.92 | externalAuthProfile-PasswordProfile-SourceAuth | 0 | 0 | This is the password for the Source Auth pseudo user. |
1.3.6.1.4.1.529.23.142.1.1.93 | externalAuthProfile-LocalProfilesFirst | 0 | 0 | Authenticate using local profiles first. |
1.3.6.1.4.1.529.23.142.1.1.94 | externalAuthProfile-Noattr6UseTermsrv | 0 | 0 | Using terminal server if attribute 6 is missing from RADIUS authentication. |
1.3.6.1.4.1.529.23.142.1.1.96 | externalAuthProfile-Dnis | 0 | 0 | Authenticate DNIS using this password. |
1.3.6.1.4.1.529.23.142.1.1.97 | externalAuthProfile-Action-o | 0 | 0 | None |
1.3.6.1.4.1.529.23.142.1.1.98 | externalAuthProfile-RadAuthClient-AuthNetworkRouteServer | 0 | 0 | Determines whether Radius server supports multiple profiles with the same user-name. Otherwise destination IP address is append… |
1.3.6.1.4.1.529.23.142.1.1.99 | externalAuthProfile-RadAuthClient-IdAuthPrefixX25 | 0 | 0 | A short text string prepended to the username portion of a DNIS authentication request for X25 calls. |
1.3.6.1.4.1.529.23.142.1.1.100 | externalAuthProfile-CliUserAuth | 0 | 0 | Authenticate the user Locally or Externally in the sequence specified by this filed. |
1.3.6.1.4.1.529.23.142.1.1.101 | externalAuthProfile-RadAuthClient-AllowUnencryptedTunnelPassword | 0 | 0 | When set to 'YES', unencrypted as well as encrypted Tunnel-Password, from RADIUS, is accepted. When set to 'NO' only encrypted … |
1.3.6.1.4.1.529.23.142.1.1.102 | externalAuthProfile-RadAuthClient-AuthCliUserDnis | 0 | 0 | Pseudo DNIS number for CLI users. If set, this number is sent to RADIUS as DNIS. If not set, DNIS is not sent to RADIUS. |
1.3.6.1.4.1.529.23.142.1.1.103 | externalAuthProfile-RadAuthClient-AllowNasPortTypeInCliUserAuth | 0 | 0 | When set to 'NO', NAS_Port_Type attribute is NOT sent in the RADIUS authentication request packet while authenticating CLI user… |
1.3.6.1.4.1.529.23.142.1.1.104 | externalAuthProfile-RadAuthClient-AuthHost1 | 0 | 0 | The IP address/hostname of the first RADIUS authentication server |
1.3.6.1.4.1.529.23.142.1.1.105 | externalAuthProfile-RadAuthClient-AuthHost2 | 0 | 0 | The IP address/hostname of the second RADIUS authentication server |
1.3.6.1.4.1.529.23.142.1.1.106 | externalAuthProfile-RadAuthClient-AuthHost3 | 0 | 0 | The IP address/hostname of the third RADIUS authentication server |
1.3.6.1.4.1.529.23.142.1.1.107 | externalAuthProfile-RadAcctClient-AcctHost1 | 0 | 0 | The IP address/hostname of the first RADIUS accounting server. |
1.3.6.1.4.1.529.23.142.1.1.108 | externalAuthProfile-RadAcctClient-AcctHost2 | 0 | 0 | The IP address/hostname of the second RADIUS accounting server. |
1.3.6.1.4.1.529.23.142.1.1.109 | externalAuthProfile-RadAcctClient-AcctHost3 | 0 | 0 | The IP address/hostname of the third RADIUS accounting server. |
1.3.6.1.4.1.529.23.142.1.1.110 | externalAuthProfile-RadAcctClient-VoipAccounting | 0 | 0 | To Enable/Disable radius accounting for VOIP calls. |
1.3.6.1.4.1.529.23.142.1.1.111 | externalAuthProfile-RadAcctClient-AcctOnSwitchover | 0 | 0 | Determines whether Accounting-on packet with event Ascend-Controller-Switchover should be sent or not during switchover when sy… |
... |