TRUE if Annex B ANFP functionality is enabled, otherwise FALSE. The gshdsl-standard-network-type must be set to European Annex B, and the port cannot be CPE. This field makes the modem perform in Annex B mode, but slightly differently. This is to comply with the UK ANFP requirements and pass the BTexact Technologies PSD measurement technique to meet BT approval. Only enable this field for that test specifically.
Parsed from file ASCEND-MIBSHDSLNET-MIB.mib
Module: ASCEND-MIBSHDSLNET-MIB
Vendor: Ascend Communications Inc.
Module: ASCEND-MIBSHDSLNET-MIB
[Automatically extracted from oidview.com]
shdslNetworkProfile-LineConfig-AnnexbAnfpEnabled OBJECT-TYPE SYNTAX INTEGER { no (1), yes (2) } ACCESS read-write STATUS mandatory DESCRIPTION "TRUE if Annex B ANFP functionality is enabled, otherwise FALSE. The gshdsl-standard-network-type must be set to European Annex B, and the port cannot be CPE. This field makes the modem perform in Annex B mode, but slightly differently. This is to comply with the UK ANFP requirements and pass the BTexact Technologies PSD measurement technique to meet BT approval. Only enable this field for that test specifically." ::= { mibshdslNetworkProfileEntry 35 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.529.23.147.1.1.1 | shdslNetworkProfile-Shelf-o | 0 | 0 | None |
| 1.3.6.1.4.1.529.23.147.1.1.2 | shdslNetworkProfile-Slot-o | 0 | 0 | None |
| 1.3.6.1.4.1.529.23.147.1.1.3 | shdslNetworkProfile-Item-o | 0 | 0 | None |
| 1.3.6.1.4.1.529.23.147.1.1.4 | shdslNetworkProfile-Name | 0 | 0 | For future use. The current design does not use the name field but instead references Shdsl lines by the physical address; we m… |
| 1.3.6.1.4.1.529.23.147.1.1.5 | shdslNetworkProfile-PhysicalAddress-Shelf | 0 | 0 | The number of the shelf that the addressed physical device resides on. |
| 1.3.6.1.4.1.529.23.147.1.1.6 | shdslNetworkProfile-PhysicalAddress-Slot | 0 | 0 | The number of the slot that the addressed physical device resides on. |
| 1.3.6.1.4.1.529.23.147.1.1.7 | shdslNetworkProfile-PhysicalAddress-ItemNumber | 0 | 0 | A number that specifies an addressable entity within the context of shelf and slot. |
| 1.3.6.1.4.1.529.23.147.1.1.8 | shdslNetworkProfile-Enabled | 0 | 0 | TRUE if the line is enabled, otherwise FALSE. |
| 1.3.6.1.4.1.529.23.147.1.1.9 | shdslNetworkProfile-SparingMode | 0 | 0 | Port sparing operational mode for this port. |
| 1.3.6.1.4.1.529.23.147.1.1.10 | shdslNetworkProfile-IgnoreLineup | 0 | 0 | Ignore line up value for this port. |
| 1.3.6.1.4.1.529.23.147.1.1.11 | shdslNetworkProfile-ProfileNumber | 0 | 0 | For potential backwards compatibility. The current design consists of one line profile numbered 0. |
| 1.3.6.1.4.1.529.23.147.1.1.12 | shdslNetworkProfile-LineConfig-TrunkGroup | 0 | 0 | The trunk group to which this line is assigned. 0 means this line is not part of a trunk group. |
| 1.3.6.1.4.1.529.23.147.1.1.13 | shdslNetworkProfile-LineConfig-NailedGroup | 0 | 0 | A number that identifies the set of lines that makes up a nailed group. 0 means this line is not part of a nailed group. |
| 1.3.6.1.4.1.529.23.147.1.1.14 | shdslNetworkProfile-LineConfig-VpSwitchingVpi | 0 | 0 | The Vpi to be used for the VP switching. Rest of the valid VPIs in valid vpi-vci-range will be used for the VC switching. Chang… |
| 1.3.6.1.4.1.529.23.147.1.1.15 | shdslNetworkProfile-LineConfig-RoutePort-SlotNumber-SlotNumber | 0 | 0 | None |
| 1.3.6.1.4.1.529.23.147.1.1.16 | shdslNetworkProfile-LineConfig-RoutePort-SlotNumber-ShelfNumber | 0 | 0 | TNT is a multi shelf system. To minimise the changes required to existing code the shelf number is added to this structure as i… |
| 1.3.6.1.4.1.529.23.147.1.1.17 | shdslNetworkProfile-LineConfig-RoutePort-RelativePortNumber-RelativePortNumber | 0 | 0 | None |
| 1.3.6.1.4.1.529.23.147.1.1.18 | shdslNetworkProfile-LineConfig-Activation | 0 | 0 | Line activation mode. |
| 1.3.6.1.4.1.529.23.147.1.1.19 | shdslNetworkProfile-LineConfig-CallRouteInfo-Shelf | 0 | 0 | The number of the shelf that the addressed physical device resides on. |
| 1.3.6.1.4.1.529.23.147.1.1.20 | shdslNetworkProfile-LineConfig-CallRouteInfo-Slot | 0 | 0 | The number of the slot that the addressed physical device resides on. |
| 1.3.6.1.4.1.529.23.147.1.1.21 | shdslNetworkProfile-LineConfig-CallRouteInfo-ItemNumber | 0 | 0 | A number that specifies an addressable entity within the context of shelf and slot. |
| 1.3.6.1.4.1.529.23.147.1.1.22 | shdslNetworkProfile-LineConfig-UnitType | 0 | 0 | The Unit Type defines if a line is acting as either a Central Office (COE) or Customer Premise Equipment (CPE). Note that the r… |
| 1.3.6.1.4.1.529.23.147.1.1.23 | shdslNetworkProfile-LineConfig-NtrEnabled | 0 | 0 | TRUE if NTR functionality is enabled, otherwise FALSE. If the unit-type is COE, it will take the system clock as the input when… |
| 1.3.6.1.4.1.529.23.147.1.1.24 | shdslNetworkProfile-LineConfig-ClockSource | 0 | 0 | Determine whether the 8KHz clock from the SHDSL line (unit-type has to be CPE and ntr-enabled has to be yes) is eligible to be … |
| 1.3.6.1.4.1.529.23.147.1.1.25 | shdslNetworkProfile-LineConfig-ClockPriority | 0 | 0 | Clock priority assigned to the SHDSL line. Used to select a particular SHDSL line as the 8KHz system clock source. |
| 1.3.6.1.4.1.529.23.147.1.1.26 | shdslNetworkProfile-LineConfig-LoopBack | 0 | 0 | Configuration of different modem loopbacks. |
| 1.3.6.1.4.1.529.23.147.1.1.27 | shdslNetworkProfile-LineConfig-Margin | 0 | 0 | Selects a margin range between the signal to noise floor. |
| 1.3.6.1.4.1.529.23.147.1.1.28 | shdslNetworkProfile-LineConfig-RateMode | 0 | 0 | Used for G.SHDSL technology. Selects if the modem operates in Fixed or Auto rate mode. |
| 1.3.6.1.4.1.529.23.147.1.1.29 | shdslNetworkProfile-LineConfig-MinRate | 0 | 0 | Used for G.SHDSL technology. When the rate-mode is set to Auto, this is the minimum rate the modem will train to. |
| 1.3.6.1.4.1.529.23.147.1.1.30 | shdslNetworkProfile-LineConfig-MaxRate | 0 | 0 | Used for G.SHDSL technology. When the rate-mode is set to Auto, this is the maximum rate the modem will train to. When the rate… |
| 1.3.6.1.4.1.529.23.147.1.1.31 | shdslNetworkProfile-LineConfig-GshdslStandardNetworkType | 0 | 0 | Per the G.SHDSL Standard G.991.2. This parameter allows selection for the modem to operate either the North American Annex 'A' … |
| 1.3.6.1.4.1.529.23.147.1.1.32 | shdslNetworkProfile-LineConfig-GshdslPsdType | 0 | 0 | Per the G.SHDSL Standard G.911.2. This parameter allows selection for the modem to output a symmetric PSD at all rates or asymm… |
| 1.3.6.1.4.1.529.23.147.1.1.33 | shdslNetworkProfile-Action-o | 0 | 0 | None |
| 1.3.6.1.4.1.529.23.147.1.1.34 | shdslNetworkProfile-LineConfig-SnextMargin | 0 | 0 | Selects a Snext margin range with a worst-case self next noise model given current loop insertion loss. |
| 1.3.6.1.4.1.529.23.147.1.1.36 | shdslNetworkProfile-LineConfig-MasterBindingPort | 0 | 0 | This parameter defines if a port is used as a master or slave for port binding purposes. Only odd ports are configured masters … |