The sustainable cell rate (SCR) expressed in Kbits per second ( Sustainable Bandwidth in Kbits/sec )
Parsed from file mibatmqos.mib.txt
Company: None
Module: ASCEND-MIBATMQOSPROFILE-MIB
The sustainable cell rate (SCR) expressed in Kbits per second ( Sustainable Bandwidth in Kbits/sec )
Parsed from file ASCEND-MIBATMQOS-MIB.mib
Module: ASCEND-MIBATMQOS-MIB
Vendor: Ascend Communications Inc.
Module: ASCEND-MIBATMQOS-MIB
[Automatically extracted from oidview.com]
atmQosProfile__sustainable_rate_kbits_per_sec OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The sustainable cell rate (SCR) expressed in Kbits per second ( Sustainable Bandwidth in Kbits/sec )" ::= { mibatmQosProfileEntry 9 }
atmQosProfile-SustainableRateKbitsPerSec OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The sustainable cell rate (SCR) expressed in Kbits per second ( Sustainable Bandwidth in Kbits/sec )" ::= { mibatmQosProfileEntry 9 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.529.23.21.1.1.1 | atmQosProfile-ContractName, atmQosProfile__contract_name | 0 | 0 | The name of the Quality of Service (QoS) contract. |
1.3.6.1.4.1.529.23.21.1.1.2 | atmQosProfile-TrafficDescriptorIndex, atmQosProfile__traffic_descriptor_index | 0 | 0 | Traffic descriptor index. |
1.3.6.1.4.1.529.23.21.1.1.3 | atmQosProfile-TrafficDescriptorType, atmQosProfile__traffic_descriptor_type | 0 | 0 | The Traffic Descriptor type. |
1.3.6.1.4.1.529.23.21.1.1.4 | atmQosProfile-AtmServiceCategory, atmQosProfile__atm_service_category | 0 | 0 | The ATM Service Category Type. |
1.3.6.1.4.1.529.23.21.1.1.5 | atmQosProfile__atm_qos | 0 | 0 | The ATM Quality of Service Class. |
1.3.6.1.4.1.529.23.21.1.1.6 | atmQosProfile-PeakRateKbitsPerSec, atmQosProfile__peak_rate_kbits_per_sec | 0 | 0 | The Peak Cell Rate (PCR) expressed in Kbits per second ( Peak Bandwidth in KBits/sec ) |
1.3.6.1.4.1.529.23.21.1.1.7 | atmQosProfile-PeakCellRateCellsPerSec, atmQosProfile__peak_cell_rate_cells_per_sec | 0 | 0 | The Peak Cell Rate (PCR) expressed in cells per second |
1.3.6.1.4.1.529.23.21.1.1.8 | atmQosProfile__peak_cell_rate_cpl0_cells_per_sec | 0 | 0 | The Peak Cell Rate (PCR) for CLP=0 expressed in cells per second |
1.3.6.1.4.1.529.23.21.1.1.10 | atmQosProfile-SustainableCellRateCellsPerSec, atmQosProfile__sustainable_cell_rate_cells_per_sec | 0 | 0 | The sustainable cell rate (SCR) expressed in cells per second |
1.3.6.1.4.1.529.23.21.1.1.11 | atmQosProfile-IgnoreCellDelayVariationTolerance, atmQosProfile__ignore_cell_delay_variation_tolerance | 0 | 0 | Ignore cell-delay-variation-tolerance parameter. When it is set to yes, cell-delay-variation-tolerance parameter is ignored, an… |
1.3.6.1.4.1.529.23.21.1.1.12 | atmQosProfile-CellDelayVariationTolerance, atmQosProfile__cell_delay_variation_tolerance | 0 | 0 | Cell delay variation tolerance is expressed in microseconds. It is ignored when ignore-cell-delay-variation-tolerance is yes. |
1.3.6.1.4.1.529.23.21.1.1.13 | atmQosProfile-IgnoreMaxBurstSize, atmQosProfile__ignore_max_burst_size | 0 | 0 | Ignore max-burst-size parameter. When it is set to yes, max-burst-size parameter is ignored, and an internal parameter is used … |
1.3.6.1.4.1.529.23.21.1.1.14 | atmQosProfile-MaxBurstSize, atmQosProfile__max_burst_size | 0 | 0 | Maximum burst size determines the maximum number of cells that can be transmitted at the peak cell rate before they become cand… |
1.3.6.1.4.1.529.23.21.1.1.15 | atmQosProfile__minimum_cell_rate_cells_per_sec | 0 | 0 | minimum Cell Rate (MCR) in cells per second. |
1.3.6.1.4.1.529.23.21.1.1.16 | atmQosProfile-AalType, atmQosProfile__aal_type | 0 | 0 | ATM Adaptation Layer type |
1.3.6.1.4.1.529.23.21.1.1.17 | atmQosProfile-EarlyPacketDiscard, atmQosProfile__early_packet_discard | 0 | 0 | Applies to egress AAL5 packets. If the first cell in a packet can not be queued then that cell and all the remaining cells in t… |
1.3.6.1.4.1.529.23.21.1.1.18 | atmQosProfile-PartialPacketDiscard, atmQosProfile__partial_packet_discard | 0 | 0 | Applies to ingress AAL5 packets. If non-conforming cell is discarded then the remaining cells in the packet (except the last ce… |
1.3.6.1.4.1.529.23.21.1.1.19 | atmQosProfile-TagOrDiscard, atmQosProfile__tag_or_discard | 0 | 0 | The non-conforming CLP=0 SCR cell should be tagged or discarded |
1.3.6.1.4.1.529.23.21.1.1.20 | atmQosProfile-Action-o, atmQosProfile__action__ | 0 | 0 | None |
1.3.6.1.4.1.529.23.21.1.1.21 | atmQosProfile-SubChannel | 0 | 0 | For DSL technologies that support multiple sub-channels on one line, when the multiple sub-channels are indeed used at same tim… |