The type of bearer channel capability to set up for each switched call in the session.
Parsed from file ASCEND-MIBDBA-MIB.mib
Module: ASCEND-MIBDBA-MIB
Vendor: Ascend Communications Inc.
Module: ASCEND-MIBDBA-MIB
[Automatically extracted from oidview.com]
dBAProfile-oDataSvc OBJECT-TYPE SYNTAX INTEGER { voice (1), n-56kRestricted (2), n-64kClear (3), n-64kRestricted (4), n-56kClear (5), n-384kRestricted (6), n-384kClear (7), n-1536kClear (8), n-1536kRestricted (9), n-128kClear (10), n-192kClear (11), n-256kClear (12), n-320kClear (13), dws384Clear (14), n-448Clear (15), n-512Clear (16), n-576Clear (17), n-640Clear (18), n-704Clear (19), n-768Clear (20), n-832Clear (21), n-896Clear (22), n-960Clear (23), n-1024Clear (24), n-1088Clear (25), n-1152Clear (26), n-1216Clear (27), n-1280Clear (28), n-1344Clear (29), n-1408Clear (30), n-1472Clear (31), n-1600Clear (32), n-1664Clear (33), n-1728Clear (34), n-1792Clear (35), n-1856Clear (36), n-1920Clear (37), x30RestrictedBearer (39), v110ClearBearer (40), n-64kX30Restricted (41), n-56kV110Clear (42), modem (43), atmodem (44), n-2456kV110 (46), n-4856kV110 (47), n-9656kV110 (48), n-19256kV110 (49), n-38456kV110 (50), n-2456krV110 (51), n-4856krV110 (52), n-9656krV110 (53), n-19256krV110 (54), n-38456krV110 (55), n-2464kV110 (56), n-4864kV110 (57), n-9664kV110 (58), n-19264kV110 (59), n-38464kV110 (60), n-2464krV110 (61), n-4864krV110 (62), n-9664krV110 (63), n-19264krV110 (64), n-38464krV110 (65), v32 (66), phs64k (67), voiceOverIp (68), atmSvc (70), frameRelaySvc (71), vpnTunnel (72), wormarq (73), n-14456kV110 (74), n-28856kV110 (75), n-14456krV110 (76), n-28856krV110 (77), n-14464kV110 (78), n-28864kV110 (79), n-14464krV110 (80), n-28864krV110 (81), modem31khzAudio (82), x25Svc (83), n-144kClear (255), iptoip (263) } ACCESS read-write STATUS mandatory DESCRIPTION "The type of bearer channel capability to set up for each switched call in the session." ::= { mibdBAProfileEntry 14 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.529.23.71.1.1.1 | dBAProfile-Shelf-o | 0 | 0 | None |
1.3.6.1.4.1.529.23.71.1.1.2 | dBAProfile-Slot-o | 0 | 0 | None |
1.3.6.1.4.1.529.23.71.1.1.3 | dBAProfile-Item-o | 0 | 0 | None |
1.3.6.1.4.1.529.23.71.1.1.4 | dBAProfile-LogicalItem-o | 0 | 0 | None |
1.3.6.1.4.1.529.23.71.1.1.5 | dBAProfile-LogicalAddress-PhysicalAddress-Shelf | 0 | 0 | The number of the shelf that the addressed physical device resides on. |
1.3.6.1.4.1.529.23.71.1.1.6 | dBAProfile-LogicalAddress-PhysicalAddress-Slot | 0 | 0 | The number of the slot that the addressed physical device resides on. |
1.3.6.1.4.1.529.23.71.1.1.7 | dBAProfile-LogicalAddress-PhysicalAddress-ItemNumber | 0 | 0 | A number that specifies an addressable entity within the context of shelf and slot. |
1.3.6.1.4.1.529.23.71.1.1.8 | dBAProfile-LogicalAddress-LogicalItem | 0 | 0 | A number that specifies an addressable logical entity within the context of a physical address. |
1.3.6.1.4.1.529.23.71.1.1.9 | dBAProfile-Name | 0 | 0 | DBA Profiles are recognized by their names given them by the user. The name is a standard null terminated ASCII string. |
1.3.6.1.4.1.529.23.71.1.1.10 | dBAProfile-PhoneNumber | 0 | 0 | The number to dial for this call. |
1.3.6.1.4.1.529.23.71.1.1.11 | dBAProfile-BillingNumber | 0 | 0 | The billing number to use which is either a 'calling party number' or a 'billing suffix' that is appended to the end of the pho… |
1.3.6.1.4.1.529.23.71.1.1.12 | dBAProfile-oCallType | 0 | 0 | session channel type. |
1.3.6.1.4.1.529.23.71.1.1.13 | dBAProfile-oCallMgm | 0 | 0 | One of the management type listed above. |
1.3.6.1.4.1.529.23.71.1.1.15 | dBAProfile-Force56 | 0 | 0 | TRUE if the data should be treated as 7-bit data even if the switchedCallType would normally imply 8 bit data. |
1.3.6.1.4.1.529.23.71.1.1.16 | dBAProfile-BaseChannelCount | 0 | 0 | When the session is initially set up, and if it is a fixed session, the number of channels to be used for the call. |
1.3.6.1.4.1.529.23.71.1.1.17 | dBAProfile-IncrementChannelCount | 0 | 0 | Number of channels to increment as a block. |
1.3.6.1.4.1.529.23.71.1.1.18 | dBAProfile-DecrementChannelCount | 0 | 0 | Number of channels to decrement as a block. |
1.3.6.1.4.1.529.23.71.1.1.19 | dBAProfile-oFailAction | 0 | 0 | If unable to establish a dba session based on the parameters specified, then the action to be taken is specified in the failure… |
1.3.6.1.4.1.529.23.71.1.1.20 | dBAProfile-BitInversionRequired | 0 | 0 | TRUE if the data being transferred from the host should be inverted before being sent to the network, and FALSE otherwise. I th… |
1.3.6.1.4.1.529.23.71.1.1.21 | dBAProfile-Ft1Caller | 0 | 0 | BOOLEAN which is true for Fractional T1 calls when this side is the caller, and FALSE otherwise. |
1.3.6.1.4.1.529.23.71.1.1.22 | dBAProfile-Ft1Timeout | 0 | 0 | None |
1.3.6.1.4.1.529.23.71.1.1.23 | dBAProfile-CallByCallID | 0 | 0 | The ID for the call-by-call signalling for PRI. |
1.3.6.1.4.1.529.23.71.1.1.24 | dBAProfile-CalledNumberType | 0 | 0 | Indication of whether national number, international number, etc. is specified. |
1.3.6.1.4.1.529.23.71.1.1.25 | dBAProfile-UnknownPlanUnknown | 0 | 0 | If TRUE indicates that UNKNOWN number plan is used in conjunction with unknown number instead of default, ISDN. |
1.3.6.1.4.1.529.23.71.1.1.26 | dBAProfile-LocalPlanIsdn | 0 | 0 | If TRUE indicates that ISDN number plan is used in conjunction with local number instead of default, PRIVATE. |
1.3.6.1.4.1.529.23.71.1.1.27 | dBAProfile-TransitNumber | 0 | 0 | The string for use in the 'transit network ie' for PRI calling when going through a LEC. |
1.3.6.1.4.1.529.23.71.1.1.28 | dBAProfile-oAutoBERT | 0 | 0 | Should we BERT at session startup and for how long. |
1.3.6.1.4.1.529.23.71.1.1.29 | dBAProfile-TimedCall | 0 | 0 | TRUE if we should pay attention to the following time period parameters. Not used when the call type is dynamic N-by. |
1.3.6.1.4.1.529.23.71.1.1.30 | dBAProfile-FlagIdle | 0 | 0 | TRUE if looking for flag idle, FALSE when looking for mark idle. |
1.3.6.1.4.1.529.23.71.1.1.31 | dBAProfile-oDynAlg | 0 | 0 | The algorithm to use for determining weighted line utilization. |
1.3.6.1.4.1.529.23.71.1.1.32 | dBAProfile-SecondsOfHistory | 0 | 0 | Number of seconds to keep history data around for. This number is in the range of 1 through MAX_HISTORY_SECONDS. |
1.3.6.1.4.1.529.23.71.1.1.33 | dBAProfile-AddSecondsOfPersistence | 0 | 0 | Once the upper threshold of utilization is passed, the number of seconds it should stay there is defined here. |
1.3.6.1.4.1.529.23.71.1.1.34 | dBAProfile-RemoveSecondsOfPersistence | 0 | 0 | Once the lower threshold of utilization is passed, the number of seconds it should stay there is defined here. |
1.3.6.1.4.1.529.23.71.1.1.35 | dBAProfile-NailedUpGroup | 0 | 0 | Nailed-up group letter. This is a group or number field as defined in lcdparam.h. |
1.3.6.1.4.1.529.23.71.1.1.36 | dBAProfile-CallPassword | 0 | 0 | DBA call password authenticated against port's password on receiver side. Ignored if port's password is not defined. |
1.3.6.1.4.1.529.23.71.1.1.37 | dBAProfile-DbaPriNumberingPlanId | 0 | 0 | PRI Called Party element's Numbering-Plan-ID value for outgoing T1-to-PRI calls. |
1.3.6.1.4.1.529.23.71.1.1.38 | dBAProfile-Action-o | 0 | 0 | None |