The Vpi to be used for the VP switching. Rest of the VPIs within valid vpi-vci-range will be used for the VC switching. Changes in this range will take effect immediately. THE USER SHOULD BE VERY CAREFUL WHILE CHANGING THIS VALUE BECAUSE ALL CONNECTIONS ON THE LIM WHERE THIS PORT BELONGS WILL BE DROPPED IN ORDER TO MAKE THIS NEW VALUE EFFECTIVE IMMEDIATELY.
Parsed from file ASCEND-MIBVDSLNET-MIB.mib
Module: ASCEND-MIBVDSLNET-MIB
Vendor: Ascend Communications Inc.
Module: ASCEND-MIBVDSLNET-MIB
[Automatically extracted from oidview.com]
vdslNetworkProfile-LineConfig-VpSwitchingVpi OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The Vpi to be used for the VP switching. Rest of the VPIs within valid vpi-vci-range will be used for the VC switching. Changes in this range will take effect immediately. THE USER SHOULD BE VERY CAREFUL WHILE CHANGING THIS VALUE BECAUSE ALL CONNECTIONS ON THE LIM WHERE THIS PORT BELONGS WILL BE DROPPED IN ORDER TO MAKE THIS NEW VALUE EFFECTIVE IMMEDIATELY." ::= { mibvdslNetworkProfileEntry 20 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.529.23.9.1.1.1 | vdslNetworkProfile-Shelf-o, vdslNetworkProfile__shelf__ | 0 | 0 | None |
1.3.6.1.4.1.529.23.9.1.1.2 | vdslNetworkProfile-Slot-o, vdslNetworkProfile__slot__ | 0 | 0 | None |
1.3.6.1.4.1.529.23.9.1.1.3 | vdslNetworkProfile-Item-o, vdslNetworkProfile__item__ | 0 | 0 | None |
1.3.6.1.4.1.529.23.9.1.1.4 | vdslNetworkProfile-Name, vdslNetworkProfile__name | 0 | 0 | For future use. The current design does not use the name field but instead references Vdsl lines by the physical address; we ma… |
1.3.6.1.4.1.529.23.9.1.1.5 | vdslNetworkProfile__line_interface__enabled | 0 | 0 | Boolean that is TRUE if this interface enabled, FALSE otherwise. |
1.3.6.1.4.1.529.23.9.1.1.6 | vdslNetworkProfile__line_interface__answer_number_1 | 0 | 0 | Phone numbers to match when routing by incoming phone number. |
1.3.6.1.4.1.529.23.9.1.1.7 | vdslNetworkProfile__line_interface__answer_number_2 | 0 | 0 | Phone numbers to match when routing by incoming phone number. |
1.3.6.1.4.1.529.23.9.1.1.8 | vdslNetworkProfile__line_interface__max_rate | 0 | 0 | The symetrical interface rate. This parameter applies to both pipeline and Max. |
1.3.6.1.4.1.529.23.9.1.1.9 | vdslNetworkProfile__line_interface__unit_type | 0 | 0 | The Unit Type defines if a line is acting as either a Central Office (COE) or Customer Premise Equipment (CPE). Note that the r… |
1.3.6.1.4.1.529.23.9.1.1.10 | vdslNetworkProfile__line_interface__data_rate_mode | 0 | 0 | The data rate mode define the mode for modem training |
1.3.6.1.4.1.529.23.9.1.1.11 | vdslNetworkProfile-PhysicalAddress-Shelf, vdslNetworkProfile__physical_address__shelf | 0 | 0 | The number of the shelf that the addressed physical device resides on. |
1.3.6.1.4.1.529.23.9.1.1.12 | vdslNetworkProfile-PhysicalAddress-Slot, vdslNetworkProfile__physical_address__slot | 0 | 0 | The number of the slot that the addressed physical device resides on. |
1.3.6.1.4.1.529.23.9.1.1.13 | vdslNetworkProfile-PhysicalAddress-ItemNumber, vdslNetworkProfile__physical_address__item_number | 0 | 0 | A number that specifies an addressable entity within the context of shelf and slot. |
1.3.6.1.4.1.529.23.9.1.1.14 | vdslNetworkProfile-Action-o, vdslNetworkProfile__action__ | 0 | 0 | None |
1.3.6.1.4.1.529.23.9.1.1.15 | vdslNetworkProfile__line_interface__auto_base_rate | 0 | 0 | When the Rate Mode is set to auto. This parameter defines the base address that the auto rate mechanism uses to start its initi… |
1.3.6.1.4.1.529.23.9.1.1.16 | vdslNetworkProfile-Enabled | 0 | 0 | TRUE if the line is enabled, otherwise FALSE. |
1.3.6.1.4.1.529.23.9.1.1.17 | vdslNetworkProfile-SparingMode | 0 | 0 | Port sparing operational mode for this port. |
1.3.6.1.4.1.529.23.9.1.1.18 | vdslNetworkProfile-IgnoreLineup | 0 | 0 | Ignore line up value for this port. |
1.3.6.1.4.1.529.23.9.1.1.19 | vdslNetworkProfile-LineConfig-NailedGroup | 0 | 0 | A number that identifies the this unique physical DSL line. |
1.3.6.1.4.1.529.23.9.1.1.22 | vdslNetworkProfile-LineConfig-UpStreamFixedRate | 0 | 0 | The following Up/Down stream rate relationships are supported: (0.965Mbps/19.306Mbps); (1.930Mbps/11.463Mbps); (3.861Mbps/11.46… |
1.3.6.1.4.1.529.23.9.1.1.23 | vdslNetworkProfile-LineConfig-DownStreamFixedRate | 0 | 0 | The following Up/Down stream rate relationships are supported: (0.965Mbps/19.306Mbps); (1.930Mbps/11.463Mbps); (3.861Mbps/11.46… |
1.3.6.1.4.1.529.23.9.1.1.24 | vdslNetworkProfile-LineConfig-ConfigLoopback | 0 | 0 | Configuration of different modem loopbacks. |
1.3.6.1.4.1.529.23.9.1.1.25 | vdslNetworkProfile-LineConfig-PsdValue | 0 | 0 | Configuration of PSD parameter. It defines the power that is allowed to be sent to the line. |
1.3.6.1.4.1.529.23.9.1.1.26 | vdslNetworkProfile-LineConfig-LinkStatecmd | 0 | 0 | Sets the link connect state. Use this to control status of the VDSL link connect state machine. The auto-connect-cmd will train… |