After a trap is generated, a timer is started. If the
event that generated the trap occurs while the timer is
running, no trap will be generated for the event. The
value of this object is the duration of the timer in
seconds.
Parsed from file aiSLC1.mib.txt
Company: None
Module: AISLC1-MIB
After a trap is generated, a timer is started. If the
event that generated the trap occurs while the timer is
running, no trap will be generated for the event. The
value of this object is the duration of the timer in
seconds.
Parsed from file AISLC1-MIB.mib
Module: AISLC1-MIB
Vendor: Applied Innovation Inc.
Module: AISLC1-MIB
[Automatically extracted from oidview.com]
aislc1AdminTrapTimer OBJECT-TYPE SYNTAX INTEGER(0..'ffff'h) MAX-ACCESS read-write STATUS current DESCRIPTION "After a trap is generated, a timer is started. If the event that generated the trap occurs while the timer is running, no trap will be generated for the event. The value of this object is the duration of the timer in seconds." DEFVAL { 300 } ::= { aiSLC1System 3 }
aislc1AdminTrapTimer OBJECT-TYPE SYNTAX INTEGER(0..'ffff'h) MAX-ACCESS read-write STATUS current DESCRIPTION "After a trap is generated, a timer is started. If the event that generated the trap occurs while the timer is running, no trap will be generated for the event. The value of this object is the duration of the timer in seconds." DEFVAL { 300 } ::= { aiSLC1System 3 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.539.11.1.3.0 | aislc1AdminTrapTimer | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.539.11.1.1 | aislc1AdminLogsEnabled | 1 | 1 | Determines whether the SLC sends log messages to the console port of the AISwitch. |
| 1.3.6.1.4.1.539.11.1.2 | aislc1AdminTrapsEnabled | 1 | 1 | Determines whether the SLC sends SNMP Trap PDUs. If the active CLC in the AISwitch chassis with the SLC is not SNMP capable, thi… |
| 1.3.6.1.4.1.539.11.1.4 | aislc1OperLastMsgText | 1 | 1 | Contains the message text of the last log message that was sent by the SLC (or would have been sent, if log message transmission … |
| 1.3.6.1.4.1.539.11.1.5 | aislc1OperLastMsgNum | 1 | 1 | Contains the message number of the last log message that was sent by the SLC (or would have been sent, if log message transmissio… |
| 1.3.6.1.4.1.539.11.1.6 | aislc1OperCrashCode | 1 | 1 | Contains a crash cause code. This object is for use as a varbind in TRAP PDUs only. |
| 1.3.6.1.4.1.539.11.1.7 | aislc1OperNumEventsSinceLastTrap | 1 | 1 | The number of times this trap was discarded because the aislcAdminTrapTimer had not yet expired since the last time the event whi… |
| 1.3.6.1.4.1.539.11.1.8 | aislc1StatAIBfrsInUse | 1 | 1 | The number of AI buffers currently in use. |
| 1.3.6.1.4.1.539.11.1.9 | aislc1StatAIBfrsTotal | 1 | 1 | The total number of AI buffers. |
| 1.3.6.1.4.1.539.11.1.10 | aislc1StatActiveVCs | 1 | 1 | The number of Virtual Connections currently in some state other than Idle. |
| 1.3.6.1.4.1.539.11.1.11 | aislc1StatTotalVCs | 1 | 1 | The total number of Virtual Connection structures allocated on the SLC. |
| 1.3.6.1.4.1.539.11.1.12 | aislc1StatMinLoopsPerSecond | 1 | 1 | The minimum number of iterations per second of the SLC's main polling loop during the sample period. |
| 1.3.6.1.4.1.539.11.1.13 | aislc1StatAvgLoopsPerSecond | 1 | 1 | The average number of iterations per second of the SLC's main polling loop during the sample period. |
| 1.3.6.1.4.1.539.11.1.14 | aislc1StatCurLoopsPerSecond | 1 | 1 | The number of iterations of the SLC's main polling loop during the past second. |
| 1.3.6.1.4.1.539.11.1.15 | aislc1StatFErrFifoInIsr | 1 | 1 | Number of RxFIFO half-full ISR interrupts which occurred. This is not always an error, but may be indicative of a heavy load on t… |
| 1.3.6.1.4.1.539.11.1.16 | aislc1StatErrFifoInFull | 1 | 1 | Number of times the input FIFO was detected as full. This means that data has probably been lost, due to the inability of the X.2… |
| 1.3.6.1.4.1.539.11.1.17 | aislc1StatErrFifoInPort | 1 | 1 | Number of times a bad port number has been received through the FIFO. This is probably indicative of a hardware failure, or perh… |
| 1.3.6.1.4.1.539.11.1.18 | aislc1StatErrFifoInLost | 1 | 1 | Number of characters received from the FIFO which were discarded because of lack of space. |
| 1.3.6.1.4.1.539.11.1.19 | aislc1StatErrFifoOutFull | 1 | 1 | Number of times the output FIFO was detected as full. This may be an indication of a hardware fault, or a breakdown in communicat… |
| 1.3.6.1.4.1.539.11.1.20 | aislc1StatErrWinInCode | 1 | 1 | Number of bad transaction codes received from the CLC via the window(i.e., the transaction code is out of range of the expected v… |
| 1.3.6.1.4.1.539.11.1.21 | aislc1StatErrWinInPort | 1 | 1 | Number of bad port numbers received from the CLC via the window(i.e., the relative port number is out of range of the expected va… |
| 1.3.6.1.4.1.539.11.1.22 | aislc1StatErrWinInConn | 1 | 1 | Number of bad connection transactions from the CLC via the window. |
| 1.3.6.1.4.1.539.11.1.23 | aislc1StatErrWinInDisc | 1 | 1 | Number of bad disconnection transactions from the CLC via the window. Note that this counter will probably be incremented if cal… |
| 1.3.6.1.4.1.539.11.1.24 | aislc1StatErrWinInAck | 1 | 1 | Number of unexpected connection ACK's from the CLC via the window. |
| 1.3.6.1.4.1.539.11.1.25 | aislc1StatErrWinInNak | 1 | 1 | Number of unexpected connection NAK's from the CLC via the window. |
| 1.3.6.1.4.1.539.11.1.26 | aislc1StatErrWinOutLost | 1 | 1 | Number of output window transactions which were lost due to buffer failures. |
| 1.3.6.1.4.1.539.11.1.27 | aislc1StatAIBfrsMax | 1 | 1 | The maximum number of AI buffers that have been used. |