Vendor: Applied Innovation Inc.
Module: AISPY-MIB
[Automatically extracted from oidview.com]
aiSPYInput8 OBJECT IDENTIFIER ::= { aiSPYInputs 8 }
aiSPYInput8 OBJECT IDENTIFIER ::= { aiSPYInputs 8 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.539.20.3.8.1 | aiSPYInput8State | 1 | 1 | The state of use of Input Number 8. When a sensor is connected to Input 8 set State to installed(2) to indicate that the value of… |
1.3.6.1.4.1.539.20.3.8.2 | aiSPYInput8Reading | 1 | 1 | The reading for sensor 8. If the input is digital, the reading will be 1 (active) or 0 (inactive) |
1.3.6.1.4.1.539.20.3.8.3 | aiSPYInput8Gain | 1 | 1 | A correction gain associated with the sensor variable. The value of gain is multiplied by the value from Input Sensor Number 8 to… |
1.3.6.1.4.1.539.20.3.8.4 | aiSPYInput8Offset | 1 | 1 | A correction Offset associated with the sensor variable. The value of Offset is added to the value from Input Sensor Number 8 to … |
1.3.6.1.4.1.539.20.3.8.5 | aiSPYInput8Label | 1 | 1 | A user-defined text string associated with Input Number 8. The text string is stored in non-volatile memory. |
1.3.6.1.4.1.539.20.3.8.6 | aiSPYInput8UOM | 1 | 1 | A user-defined text string associated with Input Number 8. The text string is stored in non-volatile memory. |
1.3.6.1.4.1.539.20.3.8.7 | aiSPYInput8HighLimit | 1 | 1 | When input 8 reaches or exceeds this value a trap will be generated signifying a high alarm condition at sensor 8. The HighLimit v… |
1.3.6.1.4.1.539.20.3.8.8 | aiSPYInput8LowLimit | 1 | 1 | When input 8 reaches or goes below this value a trap will be generated signifying a low alarm condition at sensor 8. The LowLimit… |
1.3.6.1.4.1.539.20.3.8.9 | aiSPYInput8RlyControl | 1 | 1 | The control of the output relays. This is a binary setting with each bit representing an alarm state. To set K1 on a high alarm, … |
1.3.6.1.4.1.539.20.3.8.10 | aiSPYInput8Delay | 1 | 1 | The number of seconds an alarm for this input must be present before annunication. The range of this setting is 0..600. This varia… |
1.3.6.1.4.1.539.20.3.8.11 | aiSPYInput8RTNDelay | 1 | 1 | The number of seconds a cleared alarm for this input must be present before annunication. The range of this setting is 0..600. Thi… |
1.3.6.1.4.1.539.20.3.8.12 | aiSPYInput8Hysteresis | 1 | 1 | The value of alarm hysteresis for this input. The input reading must decrease or increase by this value before the alarm will cle… |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.539.20.3.1 | aiSPYInput1 | 12 | 24 | None |
1.3.6.1.4.1.539.20.3.2 | aiSPYInput2 | 12 | 24 | None |
1.3.6.1.4.1.539.20.3.3 | aiSPYInput3 | 12 | 24 | None |
1.3.6.1.4.1.539.20.3.4 | aiSPYInput4 | 12 | 24 | None |
1.3.6.1.4.1.539.20.3.5 | aiSPYInput5 | 12 | 24 | None |
1.3.6.1.4.1.539.20.3.6 | aiSPYInput6 | 12 | 24 | None |
1.3.6.1.4.1.539.20.3.7 | aiSPYInput7 | 12 | 24 | None |
1.3.6.1.4.1.539.20.3.25 | aiSPYInput9 | 6 | 12 | None |
1.3.6.1.4.1.539.20.3.26 | aiSPYInput10 | 6 | 12 | None |
1.3.6.1.4.1.539.20.3.27 | aiSPYInput11 | 6 | 12 | None |
1.3.6.1.4.1.539.20.3.28 | aiSPYInput12 | 6 | 12 | None |
1.3.6.1.4.1.539.20.3.29 | aiSPYInput13 | 6 | 12 | None |
1.3.6.1.4.1.539.20.3.30 | aiSPYInput14 | 6 | 12 | None |
1.3.6.1.4.1.539.20.3.31 | aiSPYInput15 | 6 | 12 | None |
1.3.6.1.4.1.539.20.3.32 | aiSPYInput16 | 6 | 12 | None |
1.3.6.1.4.1.539.20.3.33 | aiSPYInput17 | 6 | 12 | None |
1.3.6.1.4.1.539.20.3.34 | aiSPYInput18 | 6 | 12 | None |
1.3.6.1.4.1.539.20.3.35 | aiSPYInput19 | 6 | 12 | None |
1.3.6.1.4.1.539.20.3.36 | aiSPYInput20 | 6 | 12 | None |
1.3.6.1.4.1.539.20.3.37 | aiSPYInput21 | 6 | 12 | None |
1.3.6.1.4.1.539.20.3.38 | aiSPYInput22 | 6 | 12 | None |
1.3.6.1.4.1.539.20.3.39 | aiSPYInput23 | 6 | 12 | None |
1.3.6.1.4.1.539.20.3.40 | aiSPYInput24 | 6 | 12 | None |
1.3.6.1.4.1.539.20.3.41 | aiSPYInput25 | 6 | 12 | None |
1.3.6.1.4.1.539.20.3.42 | aiSPYInput26 | 6 | 12 | None |
1.3.6.1.4.1.539.20.3.43 | aiSPYInput27 | 6 | 12 | None |
1.3.6.1.4.1.539.20.3.44 | aiSPYInput28 | 6 | 12 | None |