The number of the LU.
Parsed from file cnt-tnserv.mib.txt
Company: None
Module: APERTUS-TNSERVER-MIB
The number of the LU.
Parsed from file APERTUS-TNSERVER-MIB.mib
Module: APERTUS-TNSERVER-MIB
Vendor: Alebra Technologies, Inc.
Module: APERTUS-TNSERVER-MIB
[Automatically extracted from oidview.com]
aperTnServRtmLuNumber OBJECT-TYPE SYNTAX INTEGER (1..255) ACCESS read-only STATUS mandatory DESCRIPTION "The number of the LU." ::= { aperTnServRtmEntry 2 }
aperTnServRtmLuNumber OBJECT-TYPE SYNTAX INTEGER (1..255) ACCESS read-only STATUS mandatory DESCRIPTION "The number of the LU." ::= { aperTnServRtmEntry 2 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.543.3.1.4.1.21.1.1 | aperTnServRtmAlsName | 0 | 0 | The name of the link station. |
| 1.3.6.1.4.1.543.3.1.4.1.21.1.3 | aperTnServRtmClientIP | 0 | 0 | The IP address of the telnet client. |
| 1.3.6.1.4.1.543.3.1.4.1.21.1.4 | aperTnServRtmClientPort | 0 | 0 | The TCP port number of the telnet client. |
| 1.3.6.1.4.1.543.3.1.4.1.21.1.5 | aperTnServRtmState | 0 | 0 | The value indicates RTM is enabled or disabled for a particular LU. |
| 1.3.6.1.4.1.543.3.1.4.1.21.1.6 | aperTnServRtmLocalDisplay | 0 | 0 | This value indicates whether RTM statistics can be displayed locally at the client's workstation. |
| 1.3.6.1.4.1.543.3.1.4.1.21.1.7 | aperTnServRtmUpTime | 0 | 0 | This value represents the time elapsed since the RTM state was changed from off to on for this LU in units of 1/100th of a second… |
| 1.3.6.1.4.1.543.3.1.4.1.21.1.8 | aperTnServRtmDef | 0 | 0 | The value indicates the mode of measurement for this RTM request. The values have following meaning: firstChar(1) - time to firs… |
| 1.3.6.1.4.1.543.3.1.4.1.21.1.9 | aperTnServRtmMeasureTcpIpTime | 0 | 0 | Should transaction measurement include TCP/IP timings? |
| 1.3.6.1.4.1.543.3.1.4.1.21.1.10 | aperTnServRtmMeasureSnaTime | 0 | 0 | Should transaction measurement include SNA timings? |
| 1.3.6.1.4.1.543.3.1.4.1.21.1.11 | aperTnServRtmSamplingFactor | 0 | 0 | The fraction of transactions that should be timed. To avoid LAN congestion when TCP/IP timings are included, this value allows th… |
| 1.3.6.1.4.1.543.3.1.4.1.21.1.12 | aperTnServRtmNumberOfBoundaries | 0 | 0 | The number of RTM boundaries utilized by the LU. At least one RTM boundary must be specified so the range of this variable is 1-4… |
| 1.3.6.1.4.1.543.3.1.4.1.21.1.13 | aperTnServRtmBoundary1 | 0 | 0 | This object contains the value of the first boundary in units of 1/10th of a second. Setting this value also causes counters for … |
| 1.3.6.1.4.1.543.3.1.4.1.21.1.14 | aperTnServRtmBoundary2 | 0 | 0 | This object contains the value of the second boundary in units of 1/10th of a second. Setting this value also causes counters for… |
| 1.3.6.1.4.1.543.3.1.4.1.21.1.15 | aperTnServRtmBoundary3 | 0 | 0 | This object contains the value of the third boundary in units of 1/10th of a second. Setting this value also causes counters for … |
| 1.3.6.1.4.1.543.3.1.4.1.21.1.16 | aperTnServRtmBoundary4 | 0 | 0 | This object contains the value of the fourth boundary in units of 1/10th of a second. Setting this value also causes counters for… |
| 1.3.6.1.4.1.543.3.1.4.1.21.1.17 | aperTnServRtmCounter1 | 0 | 0 | This value indicates the number of transactions which fall in the range specified by the first boundary. When aperTnServRtmNumTra… |
| 1.3.6.1.4.1.543.3.1.4.1.21.1.18 | aperTnServRtmCounter2 | 0 | 0 | This value indicates the number of transactions which fall in the range specified by the second boundary. When aperTnServRtmNumTr… |
| 1.3.6.1.4.1.543.3.1.4.1.21.1.19 | aperTnServRtmCounter3 | 0 | 0 | This value indicates the number of transactions which fall in the range specified by the third boundary. When aperTnServRtmNumTra… |
| 1.3.6.1.4.1.543.3.1.4.1.21.1.20 | aperTnServRtmCounter4 | 0 | 0 | This value indicates the number of transactions which fall in the range specified by the fourth boundary. When aperTnServRtmNumTr… |
| 1.3.6.1.4.1.543.3.1.4.1.21.1.21 | aperTnServRtmOverFlows | 0 | 0 | This value indicates the number of transactions which exceed the highest range specified by the boundaries. When aperTnServRtmNum… |
| 1.3.6.1.4.1.543.3.1.4.1.21.1.22 | aperTnServRtmThresholdTrigger | 0 | 0 | This value indicates the threshold of average response time. If the transaction time being monitored exceeds this value and aperT… |
| 1.3.6.1.4.1.543.3.1.4.1.21.1.23 | aperTnServRtmThresholdTriggerState | 0 | 0 | If this value is on(1), then whenever the average response for this LU exceeds aperTnServRtmThresholdTrigger, then an excessive r… |
| 1.3.6.1.4.1.543.3.1.4.1.21.1.24 | aperTnServRtmCounterOverflowed | 0 | 0 | This value indicates whether any of the five transaction counters have reached their maximum value. This variable can be reset by… |
| 1.3.6.1.4.1.543.3.1.4.1.21.1.25 | aperTnServRtmCounterOverflowTriggerState | 0 | 0 | If this value is on(1), then whenever a transaction counter overflows, a counter overflow trap is generated to the management sta… |
| 1.3.6.1.4.1.543.3.1.4.1.21.1.26 | aperTnServRtmCounterOverflowHostAlert | 0 | 0 | The setting determines if an unsolicited host alert is generated when a transaction counter overflows. |
| 1.3.6.1.4.1.543.3.1.4.1.21.1.27 | aperTnServRtmUnbindTriggerState | 0 | 0 | If this value is on(1), then whenever an unbind on a session with RTM enabled occurs, a session unbound trap is generated to the … |
| 1.3.6.1.4.1.543.3.1.4.1.21.1.28 | aperTnServRtmUnbindHostAlert | 0 | 0 | The setting determines if an unsolicited host alert is generated when an unbind is received. |
| 1.3.6.1.4.1.543.3.1.4.1.21.1.29 | aperTnServRtmNumTrans | 0 | 0 | This value indicates the total number of transactions monitored. This value can be set to zero only, which will also cause all co… |
| 1.3.6.1.4.1.543.3.1.4.1.21.1.30 | aperTnServRtmTotalRspTime | 0 | 0 | This value indicates the sum of the response times for all transactions, in units of 1/10th of a second. |
| 1.3.6.1.4.1.543.3.1.4.1.21.1.31 | aperTnServRtmLastRspTime | 0 | 0 | This value indicates the response time for the last transaction in units of 1/10th of a second. |
| 1.3.6.1.4.1.543.3.1.4.1.21.1.32 | aperTnServRtmAvgRspTime | 0 | 0 | This value indicates the average response time for all transactions in units of 1/10th of a second. |
| 1.3.6.1.4.1.543.3.1.4.1.21.1.33 | aperTnServRtmMinRspTime | 0 | 0 | The minimum response time in units of 1/10th of a second. |
| 1.3.6.1.4.1.543.3.1.4.1.21.1.34 | aperTnServRtmMaxRspTime | 0 | 0 | The maximum response time in units of 1/10th of a second. |
| 1.3.6.1.4.1.543.3.1.4.1.21.1.35 | aperTnServRtmTotalSnaRspTime | 0 | 0 | The SNA component of sum of the response times for all transactions in units of 1/10th of a second. |
| 1.3.6.1.4.1.543.3.1.4.1.21.1.36 | aperTnServRtmAvgSnaRspTime | 0 | 0 | The SNA component of the average response time for all transactions in units of 1/10th of a second. |
| 1.3.6.1.4.1.543.3.1.4.1.21.1.37 | aperTnServRtmNumTcpIpSamples | 0 | 0 | The number of transaction for which TCP/IP measurements were supplied. |
| 1.3.6.1.4.1.543.3.1.4.1.21.1.38 | aperTnServRtmTotalTcpIpRspTime | 0 | 0 | The TCP/IP component of sum of the response times for all transactions in units of 1/10th of a second. |
| 1.3.6.1.4.1.543.3.1.4.1.21.1.39 | aperTnServRtmAvgTcpIpRspTime | 0 | 0 | The TCP/IP component of the average response time for all transactions in units of 1/10th of a second. |
| 1.3.6.1.4.1.543.3.1.4.1.21.1.40 | aperTnServRtmLastThinkTime | 0 | 0 | The time between the end of the penultimate transaction and the beginning of the last transaction, in units of 1/10th of a second… |
| 1.3.6.1.4.1.543.3.1.4.1.21.1.41 | aperTnServRtmAvgThinkTime | 0 | 0 | The average time *between* transactions, in units of 1/10th of a second, during which the user was thinking. |