concAttachtype
View at oid-info.com
The requested concentrator attachment type. For a dual
attachment concentrator connected to the trunk ring,
port 1 on the supervisor module (or single board
concentrator) is configured as A and port 2 is
configured as B. For a single attachment concentrator
connected beneath another concentrator, port 2 is
configured as S and port 1 is configured as M. For a
null attachment concentrator at the root of the tree,
ports 1 and 2 are configured as M. This object does
not take effect until the concentrator is reset. The
current attachment type can be determined from
snmpFddiPORTPCType for ports 1 and 2. Note that a
concentrator with no MAC is always null attachment type.
Parsed from file x-ddi-concentrator-mib.txt
Company: None
Module: X-DDI-MIB
The requested concentrator attachment type. For a dual
attachment concentrator connected to the trunk ring,
port 1 on the supervisor module (or single board
concentrator) is configured as A and port 2 is
configured as B. For a single attachment concentrator
connected beneath another concentrator, port 2 is
configured as S and port 1 is configured as M. For a
null attachment concentrator at the root of the tree,
ports 1 and 2 are configured as M. This object does
not take effect until the concentrator is reset. The
current attachment type can be determined from
snmpFddiPORTPCType for ports 1 and 2. Note that a
concentrator with no MAC is always null attachment type.
Parsed from file X-DDI-MIB.mib
Module: X-DDI-MIB
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
concAttachType OBJECT-TYPE SYNTAX INTEGER { other(1), dualAttach(2), singleAttach(3), nullAttach(4) } ACCESS read-write STATUS mandatory DESCRIPTION "The requested concentrator attachment type. For a dual attachment concentrator connected to the trunk ring, port 1 on the supervisor module (or single board concentrator) is configured as A and port 2 is configured as B. For a single attachment concentrator connected beneath another concentrator, port 2 is configured as S and port 1 is configured as M. For a null attachment concentrator at the root of the tree, ports 1 and 2 are configured as M. This object does not take effect until the concentrator is reset. The current attachment type can be determined from snmpFddiPORTPCType for ports 1 and 2. Note that a concentrator with no MAC is always null attachment type." ::= { conc 7 }
concAttachType OBJECT-TYPE SYNTAX INTEGER { other(1), dualAttach(2), singleAttach(3), nullAttach(4) } ACCESS read-write STATUS mandatory DESCRIPTION "The requested concentrator attachment type. For a dual attachment concentrator connected to the trunk ring, port 1 on the supervisor module (or single board concentrator) is configured as A and port 2 is configured as B. For a single attachment concentrator connected beneath another concentrator, port 2 is configured as S and port 1 is configured as M. For a null attachment concentrator at the root of the tree, ports 1 and 2 are configured as M. This object does not take effect until the concentrator is reset. The current attachment type can be determined from snmpFddiPORTPCType for ports 1 and 2. Note that a concentrator with no MAC is always null attachment type." ::= { conc 7 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.1.1.1.7.0 | concAttachType | 0 | 0 | concAttachtype |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.1.1.1.1 | concMgmtType | 1 | 1 | The type of network management running on the concentrator. |
| 1.3.6.1.4.1.562.1.1.1.2 | concIpAddr | 1 | 1 | The concentrator's IP address. |
| 1.3.6.1.4.1.562.1.1.1.3 | concNetMask | 1 | 1 | The concentrator's subnet mask. |
| 1.3.6.1.4.1.562.1.1.1.4 | concBroadcast | 1 | 1 | The concentrator's broadcast address. |
| 1.3.6.1.4.1.562.1.1.1.5 | concTrapReceiverTable | 1 | 4 | The concentrator trap receiver table (0 to 10 entries). This table lists the addresses of Network Management Stations that should… |
| 1.3.6.1.4.1.562.1.1.1.6 | concCommunityTable | 1 | 3 | The concentrator community table (4 entries). This table lists community strings and their access levels. When an SNMP message i… |
| 1.3.6.1.4.1.562.1.1.1.8 | concTraffic | 1 | 1 | The percentage of bandwidth utilization on the network for the previous polling interval. |
| 1.3.6.1.4.1.562.1.1.1.9 | concReset | 1 | 1 | Writing a 2 to this object resets the control logic of all modules in the concentrator. |
| 1.3.6.1.4.1.562.1.1.1.10 | concBaudRate | 1 | 1 | The baud rate in bits per second of the concentrator RS-232 port. |
| 1.3.6.1.4.1.562.1.1.1.11 | concInsertMode | 1 | 1 | The mode for inserting M-ports into the concentrator ring. |
| 1.3.6.1.4.1.562.1.1.1.12 | concClearMacTime | 1 | 1 | The time (in hundredths of a second) since mac counters were last cleared. Writing a 0 to this object causes the mac counters to… |
| 1.3.6.1.4.1.562.1.1.1.13 | concClearPortTime | 1 | 1 | The time (in hundredths of a second) since port counters were last cleared. Writing a 0 to this object causes the port counters … |
| 1.3.6.1.4.1.562.1.1.1.14 | concFddiRingTable | 1 | 4 | The concentrator ring map table. This table lists the nodes in the FDDI ring(s) to which the concentrator belongs. |