This attribute specifies the media type the frame must be in before it is
to be forwarded over the outbound supported WAN Bridge Protocol
Port. The attribute only applies to outbound Bridge Protocol Port.
For supported bridge ports, if the attribute value remains set to the
default value of unaltered then there will be no frame conversion. When
the value is set to the value ethernetConv then all frames being
forwarded out the outbound WAN Port will be converted to ethernet
before forwarding takes place. The only outbound WAN medias that
currently support conversion are: FR (Frame Relay) and VNS. All other
medias will fail the Bridge Port semantic check when attempts are made
to alter this attribute.
The following is an example of what the user may be able to do. Frames
originating from a Token Ring are to be flooded out onto another Token
Ring and a Frame Relay Port. The token ring Outbound port performs
no translation, yet the FR Port has the outboundFrameMediaType
attribute set to ethernetConv which results in the frame being translated
into Ethernet format from Token Ring format before Frame Relay does
its encapsulation and transmits over the FR port.
Parsed from file nortelPP-bridgeV1_BG00S4C.mib.txt
Company: None
Module: Nortel-Magellan-Passport-BridgeMIB
This attribute specifies the media type the frame must be in before it is
to be forwarded over the outbound supported WAN Bridge Protocol
Port. The attribute only applies to outbound Bridge Protocol Port.
For supported bridge ports, if the attribute value remains set to the
default value of unaltered then there will be no frame conversion. When
the value is set to the value ethernetConv then all frames being
forwarded out the outbound WAN Port will be converted to ethernet
before forwarding takes place. The only outbound WAN medias that
currently support conversion are: FR (Frame Relay) and VNS. All other
medias will fail the Bridge Port semantic check when attempts are made
to alter this attribute.
The following is an example of what the user may be able to do. Frames
originating from a Token Ring are to be flooded out onto another Token
Ring and a Frame Relay Port. The token ring Outbound port performs
no translation, yet the FR Port has the outboundFrameMediaType
attribute set to ethernetConv which results in the frame being translated
into Ethernet format from Token Ring format before Frame Relay does
its encapsulation and transmits over the FR port.
Parsed from file Nortel-Magellan-Passport-BridgeMIB.mib
Module: Nortel-Magellan-Passport-BridgeMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-Magellan-Passport-BridgeMIB
[Automatically extracted from oidview.com]
vrPpSrsgOutboundFrameMediaType OBJECT-TYPE SYNTAX INTEGER { unaltered(1), ethernetConv(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the media type the frame must be in before it is to be forwarded over the outbound supported WAN Bridge Protocol Port. The attribute only applies to outbound Bridge Protocol Port. For supported bridge ports, if the attribute value remains set to the default value of unaltered then there will be no frame conversion. When the value is set to the value ethernetConv then all frames being forwarded out the outbound WAN Port will be converted to ethernet before forwarding takes place. The only outbound WAN medias that currently support conversion are: FR (Frame Relay) and VNS. All other medias will fail the Bridge Port semantic check when attempts are made to alter this attribute. The following is an example of what the user may be able to do. Frames originating from a Token Ring are to be flooded out onto another Token Ring and a Frame Relay Port. The token ring Outbound port performs no translation, yet the FR Port has the outboundFrameMediaType attribute set to ethernetConv which results in the frame being translated into Ethernet format from Token Ring format before Frame Relay does its encapsulation and transmits over the FR port." DEFVAL { unaltered } ::= { vrPpSrsgProvEntry 6 }
vrPpSrsgOutboundFrameMediaType OBJECT-TYPE SYNTAX INTEGER { unaltered(1), ethernetConv(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the media type the frame must be in before it is to be forwarded over the outbound supported WAN Bridge Protocol Port. The attribute only applies to outbound Bridge Protocol Port. For supported bridge ports, if the attribute value remains set to the default value of unaltered then there will be no frame conversion. When the value is set to the value ethernetConv then all frames being forwarded out the outbound WAN Port will be converted to ethernet before forwarding takes place. The only outbound WAN medias that currently support conversion are: FR (Frame Relay) and VNS. All other medias will fail the Bridge Port semantic check when attempts are made to alter this attribute. The following is an example of what the user may be able to do. Frames originating from a Token Ring are to be flooded out onto another Token Ring and a Frame Relay Port. The token ring Outbound port performs no translation, yet the FR Port has the outboundFrameMediaType attribute set to ethernetConv which results in the frame being translated into Ethernet format from Token Ring format before Frame Relay does its encapsulation and transmits over the FR port." DEFVAL { unaltered } ::= { vrPpSrsgProvEntry 6 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.100.3.12.10.1.1 | vrPpSrsgTranslateIpx | 0 | 0 | This attribute specifies the type of translation to be performed on frames carrying IPX packets. Ethernet frames carrying IPX pa… |
| 1.3.6.1.4.1.562.2.4.1.100.3.12.10.1.2 | vrPpSrsgFragmentIp | 0 | 0 | This attribute specifies if or not outbound frames carrying IP datagrams should be fragmented to conform to message transfer uni… |
| 1.3.6.1.4.1.562.2.4.1.100.3.12.10.1.3 | vrPpSrsgServiceClass | 0 | 0 | This attribute specifies if the frames should be ordered or not before they are transmitted through a bridge port. If this attrib… |
| 1.3.6.1.4.1.562.2.4.1.100.3.12.10.1.4 | vrPpSrsgConvertArpMacAddress | 0 | 0 | This attribute is indicative of the state of the MAC address format conversion process for ARP/RARP frames. The MAC addresses ma… |
| 1.3.6.1.4.1.562.2.4.1.100.3.12.10.1.5 | vrPpSrsgPortNum | 0 | 0 | This attribute is indicative of the unique number assigned to the bridge port. It is used for SNMP management of this bridge por… |