This attribute specifies the type of translation to be performed on frames
carrying IPX packets. Ethernet frames carrying IPX payload could be
translated to IEEE 802.3 frames (with the same IPX payload) or vice-
versa. The main reason to do so is to allow the bridge unit to
consistently forward one type of frames carrying IPX packets.
Translations can be turned off altogether in which case the IPX frames
will pass through the bridge unit unchanged.
Parsed from file nortelPP-bridgeV1_BG00S4C.mib.txt
Company: None
Module: Nortel-Magellan-Passport-BridgeMIB
This attribute specifies the type of translation to be performed on frames
carrying IPX packets. Ethernet frames carrying IPX payload could be
translated to IEEE 802.3 frames (with the same IPX payload) or vice-
versa. The main reason to do so is to allow the bridge unit to
consistently forward one type of frames carrying IPX packets.
Translations can be turned off altogether in which case the IPX frames
will pass through the bridge unit unchanged.
Parsed from file Nortel-Magellan-Passport-BridgeMIB.mib
Module: Nortel-Magellan-Passport-BridgeMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-Magellan-Passport-BridgeMIB
[Automatically extracted from oidview.com]
vrPpTbpTranslateIpx OBJECT-TYPE SYNTAX INTEGER { off(0), ieee8023(1), ethernet(2), snap(3), sap(4) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the type of translation to be performed on frames carrying IPX packets. Ethernet frames carrying IPX payload could be translated to IEEE 802.3 frames (with the same IPX payload) or vice- versa. The main reason to do so is to allow the bridge unit to consistently forward one type of frames carrying IPX packets. Translations can be turned off altogether in which case the IPX frames will pass through the bridge unit unchanged." DEFVAL { off } ::= { vrPpTbpProvEntry 1 }
vrPpTbpTranslateIpx OBJECT-TYPE SYNTAX INTEGER { off(0), ieee8023(1), ethernet(2), snap(3), sap(4) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the type of translation to be performed on frames carrying IPX packets. Ethernet frames carrying IPX payload could be translated to IEEE 802.3 frames (with the same IPX payload) or vice- versa. The main reason to do so is to allow the bridge unit to consistently forward one type of frames carrying IPX packets. Translations can be turned off altogether in which case the IPX frames will pass through the bridge unit unchanged." DEFVAL { off } ::= { vrPpTbpProvEntry 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.100.3.4.10.1.2 | vrPpTbpFragmentIp | 0 | 0 | This attribute specifies if or not outbound frames carrying IP datagrams should be fragmented to conform to message transfer uni… |
| 1.3.6.1.4.1.562.2.4.1.100.3.4.10.1.3 | vrPpTbpServiceClass | 0 | 0 | This attribute specifies if the frames should be ordered or not before they are transmitted through a bridge port. If this attrib… |
| 1.3.6.1.4.1.562.2.4.1.100.3.4.10.1.4 | vrPpTbpConvertArpMacAddress | 0 | 0 | This attribute is indicative of the state of the MAC address format conversion process for ARP/RARP frames. The MAC addresses ma… |
| 1.3.6.1.4.1.562.2.4.1.100.3.4.10.1.5 | vrPpTbpPortNum | 0 | 0 | This attribute is indicative of the unique number assigned to the bridge port. It is used for SNMP management of this bridge por… |
| 1.3.6.1.4.1.562.2.4.1.100.3.4.10.1.6 | vrPpTbpOutboundFrameMediaType | 0 | 0 | This attribute specifies the media type the frame must be in before it is to be forwarded over the outbound supported WAN Bridge… |