This attribute specifies how fast a bridge port changes its STP state
while progressing towards the forwarding state. It is also used as
agingTime to age dynamic entries in the forwarding table once a
topology change is detected. This attribute is used by all the bridges
participating in the spanning tree protocol, when this bridge is the root
bridge.
The following relationship is enforced as required by the IEEE 802.1d
standards document.
2 *(bridgeForwardDelay -1.0sconds) >= bridgeMaxAge.
Parsed from file nortelPP-bridgeV1_BG00S4C.mib.txt
Company: None
Module: Nortel-Magellan-Passport-BridgeMIB
This attribute specifies how fast a bridge port changes its STP state
while progressing towards the forwarding state. It is also used as
agingTime to age dynamic entries in the forwarding table once a
topology change is detected. This attribute is used by all the bridges
participating in the spanning tree protocol, when this bridge is the root
bridge.
The following relationship is enforced as required by the IEEE 802.1d
standards document.
2 *(bridgeForwardDelay -1.0sconds) >= bridgeMaxAge.
Parsed from file Nortel-Magellan-Passport-BridgeMIB.mib
Module: Nortel-Magellan-Passport-BridgeMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-Magellan-Passport-BridgeMIB
[Automatically extracted from oidview.com]
vrBrSrbStpBridgeForwardDelay OBJECT-TYPE SYNTAX Unsigned32 (400..3000) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies how fast a bridge port changes its STP state while progressing towards the forwarding state. It is also used as agingTime to age dynamic entries in the forwarding table once a topology change is detected. This attribute is used by all the bridges participating in the spanning tree protocol, when this bridge is the root bridge. The following relationship is enforced as required by the IEEE 802.1d standards document. 2 *(bridgeForwardDelay -1.0sconds) >= bridgeMaxAge." DEFVAL { 1500 } ::= { vrBrSrbStpProvEntry 6 }
vrBrSrbStpBridgeForwardDelay OBJECT-TYPE SYNTAX Unsigned32 (400..3000) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies how fast a bridge port changes its STP state while progressing towards the forwarding state. It is also used as agingTime to age dynamic entries in the forwarding table once a topology change is detected. This attribute is used by all the bridges participating in the spanning tree protocol, when this bridge is the root bridge. The following relationship is enforced as required by the IEEE 802.1d standards document. 2 *(bridgeForwardDelay -1.0sconds) >= bridgeMaxAge." DEFVAL { 1500 } ::= { vrBrSrbStpProvEntry 6 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.562.2.4.1.100.5.5.2.10.1.1 | vrBrSrbStpStpMode | 0 | 0 | This attribute determines if this stp instance is to act as the stp instance for the backbone or an stp instance for a non-backb… |
1.3.6.1.4.1.562.2.4.1.100.5.5.2.10.1.2 | vrBrSrbStpProtocolSpec | 0 | 0 | This attribute specifies the type of spanning tree protocols that are in operation in the bridge. This means that this bridge pa… |
1.3.6.1.4.1.562.2.4.1.100.5.5.2.10.1.3 | vrBrSrbStpPriority | 0 | 0 | This attribute is used to construct the bridgeId. It forms the first two octets of the bridgeId and the remaining 6 octets are m… |
1.3.6.1.4.1.562.2.4.1.100.5.5.2.10.1.4 | vrBrSrbStpBridgeMaxAge | 0 | 0 | The maximum age of spanning tree protocol information learned from the network on any bridge port before it is discarded. This v… |
1.3.6.1.4.1.562.2.4.1.100.5.5.2.10.1.5 | vrBrSrbStpBridgeHelloTime | 0 | 0 | This attribute specifies the time interval between the transmission of configuration BPDUs on any bridge port when this bridge b… |