This attribute specifies the default class of routing for reliability
routing for all outgoing calls (from the DTE to the network) this
particular Dna. The chosen default class of routing applies to all
outgoing calls established using this Dna, and applies to the packets
travelling in both directions on all outgoing calls (local to remote,
and remote to local). For incoming calls, the default class of routing
is chosen by the calling party (as opposed to DPN, where either end
of the call can choose the default routing class).
This attribute, if set to a value of normal, indicates that the default
class of routing is normal reliability routing. If set to a value of
high, then the default class of routing is high reliability routing.
High reliability is the standard choice for most DPN and Passport
services. It usually indicates that packets are overflowed or
retransmitted at various routing levels. Typically high reliability
results in duplication and disordering of packets in the network
when errors are detected or during link congestion. However, the Vc
handles the duplication and disordering to ensure that packets are
delivered to the DTE properly.
For the Frame Relay service, duplication of packets is not desired,
in which case, normal reliability may be chosen as the preferred
class of routing.
Parsed from file nortelPP-generalVcInterfaceV1_BG00S4C.mib.txt
Company: None
Module: Nortel-Magellan-Passport-GeneralVcInterfaceMIB
This attribute specifies the default class of routing for reliability
routing for all outgoing calls (from the DTE to the network) this
particular Dna. The chosen default class of routing applies to all
outgoing calls established using this Dna, and applies to the packets
travelling in both directions on all outgoing calls (local to remote,
and remote to local). For incoming calls, the default class of routing
is chosen by the calling party (as opposed to DPN, where either end
of the call can choose the default routing class).
This attribute, if set to a value of normal, indicates that the default
class of routing is normal reliability routing. If set to a value of
high, then the default class of routing is high reliability routing.
High reliability is the standard choice for most DPN and Passport
services. It usually indicates that packets are overflowed or
retransmitted at various routing levels. Typically high reliability
results in duplication and disordering of packets in the network
when errors are detected or during link congestion. However, the Vc
handles the duplication and disordering to ensure that packets are
delivered to the DTE properly.
For the Frame Relay service, duplication of packets is not desired,
in which case, normal reliability may be chosen as the preferred
class of routing.
Parsed from file Nortel-Magellan-Passport-GeneralVcInterfaceMIB.mib
Module: Nortel-Magellan-Passport-GeneralVcInterfaceMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-Magellan-Passport-GeneralVcInterfaceMIB
[Automatically extracted from oidview.com]
gvcIfDnaOutDefaultPathReliability OBJECT-TYPE SYNTAX INTEGER { high(0), normal(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the default class of routing for reliability routing for all outgoing calls (from the DTE to the network) this particular Dna. The chosen default class of routing applies to all outgoing calls established using this Dna, and applies to the packets travelling in both directions on all outgoing calls (local to remote, and remote to local). For incoming calls, the default class of routing is chosen by the calling party (as opposed to DPN, where either end of the call can choose the default routing class). This attribute, if set to a value of normal, indicates that the default class of routing is normal reliability routing. If set to a value of high, then the default class of routing is high reliability routing. High reliability is the standard choice for most DPN and Passport services. It usually indicates that packets are overflowed or retransmitted at various routing levels. Typically high reliability results in duplication and disordering of packets in the network when errors are detected or during link congestion. However, the Vc handles the duplication and disordering to ensure that packets are delivered to the DTE properly. For the Frame Relay service, duplication of packets is not desired, in which case, normal reliability may be chosen as the preferred class of routing." DEFVAL { high } ::= { gvcIfDnaOutgoingOptionsEntry 14 }
gvcIfDnaOutDefaultPathReliability OBJECT-TYPE SYNTAX INTEGER { high(0), normal(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the default class of routing for reliability routing for all outgoing calls (from the DTE to the network) this particular Dna. The chosen default class of routing applies to all outgoing calls established using this Dna, and applies to the packets travelling in both directions on all outgoing calls (local to remote, and remote to local). For incoming calls, the default class of routing is chosen by the calling party (as opposed to DPN, where either end of the call can choose the default routing class). This attribute, if set to a value of normal, indicates that the default class of routing is normal reliability routing. If set to a value of high, then the default class of routing is high reliability routing. High reliability is the standard choice for most DPN and Passport services. It usually indicates that packets are overflowed or retransmitted at various routing levels. Typically high reliability results in duplication and disordering of packets in the network when errors are detected or during link congestion. However, the Vc handles the duplication and disordering to ensure that packets are delivered to the DTE properly. For the Frame Relay service, duplication of packets is not desired, in which case, normal reliability may be chosen as the preferred class of routing." DEFVAL { high } ::= { gvcIfDnaOutgoingOptionsEntry 14 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.107.5.12.1.7 | gvcIfDnaOutDefaultPriority | 0 | 0 | This attribute, if set to normal indicates that the default priority for outgoing calls (from the DTE to the network) for this p… |
| 1.3.6.1.4.1.562.2.4.1.107.5.12.1.11 | gvcIfDnaOutDefaultPathSensitivity | 0 | 0 | This attribute specifies the default class of routing for delay/ throughput sensitive routing for all outgoing calls (from the D… |
| 1.3.6.1.4.1.562.2.4.1.107.5.12.1.17 | gvcIfDnaOutAccess | 0 | 0 | This attribute is an extension of the Closed User Group (CUG), as follows: This attribute, if set to a value of allowed indicates… |
| 1.3.6.1.4.1.562.2.4.1.107.5.12.1.18 | gvcIfDnaDefaultTransferPriority | 0 | 0 | This attribute specifies the default transfer priority to network for all outgoing calls using this particular Dna. It can be ov… |
| 1.3.6.1.4.1.562.2.4.1.107.5.12.1.19 | gvcIfDnaTransferPriorityOverRide | 0 | 0 | When this attribute is set to yes in the call request, the called end will use the calling end provisioning data on transfer pri… |