This attribute specifies the type of Vc call:
permanentMaster,
permanentSlave,
permanentSlaveWithBackup,
permanentBackupSlave.
If the value is set to permanentMaster, then a permanent
connection will be established between 2 ends. The remote end
must be defined as a permanentSlave, permanentBackupSlave or
permanentSlaveWithBackup. The connection cannot be established
if the remote end is defined as anything else. The end defined as
permanentMaster always initiates the calls. It will attempt to call
once per minute.
If the value is set to permanentSlave then a permanent connection
will be established between 2 ends. The remote end must be defined
as a permanentMaster. The connection cannot be established if the
remote end is defined as anything else. The permanentSlave end
will attempt to call once per minute.
If the value is set to permanentSlaveWithBackup then a permanent
connection will be established between the 2 ends . The remote end
must be defined as a permanentMaster. The Connection cannot be
established if the remote end is defined as anything else. The
permanentSlaveWithBackup end will attempt to call once per
minute.
If the value is set to permanentBackupSlave then a permanent
connection will be established between the 2 ends only if the
permanentMaster end is disconnected from the
permanentSlaveWithBackup end and a backup call is established
by the redirection system. If the permanentSlaveWithBackup
interface becomes visible again, the permanentBackupSlave end is
disconnected and the permanentSlaveWithBackup end is
reconnected to the permanentMaster end. The
permanentBackupSlave end does not try to establish pvc call.
Parsed from file nortelPP-generalVcInterfaceV1_BG00S4C.mib.txt
Company: None
Module: Nortel-Magellan-Passport-GeneralVcInterfaceMIB
This attribute specifies the type of Vc call:
permanentMaster,
permanentSlave,
permanentSlaveWithBackup,
permanentBackupSlave.
If the value is set to permanentMaster, then a permanent
connection will be established between 2 ends. The remote end
must be defined as a permanentSlave, permanentBackupSlave or
permanentSlaveWithBackup. The connection cannot be established
if the remote end is defined as anything else. The end defined as
permanentMaster always initiates the calls. It will attempt to call
once per minute.
If the value is set to permanentSlave then a permanent connection
will be established between 2 ends. The remote end must be defined
as a permanentMaster. The connection cannot be established if the
remote end is defined as anything else. The permanentSlave end
will attempt to call once per minute.
If the value is set to permanentSlaveWithBackup then a permanent
connection will be established between the 2 ends . The remote end
must be defined as a permanentMaster. The Connection cannot be
established if the remote end is defined as anything else. The
permanentSlaveWithBackup end will attempt to call once per
minute.
If the value is set to permanentBackupSlave then a permanent
connection will be established between the 2 ends only if the
permanentMaster end is disconnected from the
permanentSlaveWithBackup end and a backup call is established
by the redirection system. If the permanentSlaveWithBackup
interface becomes visible again, the permanentBackupSlave end is
disconnected and the permanentSlaveWithBackup end is
reconnected to the permanentMaster end. The
permanentBackupSlave end does not try to establish pvc call.
Parsed from file Nortel-Magellan-Passport-GeneralVcInterfaceMIB.mib
Module: Nortel-Magellan-Passport-GeneralVcInterfaceMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-Magellan-Passport-GeneralVcInterfaceMIB
[Automatically extracted from oidview.com]
gvcIfDlciDcType OBJECT-TYPE SYNTAX INTEGER { permanentMaster(1), permanentSlave(2), permanentBackupSlave(3), permanentSlaveWithBackup(4) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the type of Vc call: permanentMaster, permanentSlave, permanentSlaveWithBackup, permanentBackupSlave. If the value is set to permanentMaster, then a permanent connection will be established between 2 ends. The remote end must be defined as a permanentSlave, permanentBackupSlave or permanentSlaveWithBackup. The connection cannot be established if the remote end is defined as anything else. The end defined as permanentMaster always initiates the calls. It will attempt to call once per minute. If the value is set to permanentSlave then a permanent connection will be established between 2 ends. The remote end must be defined as a permanentMaster. The connection cannot be established if the remote end is defined as anything else. The permanentSlave end will attempt to call once per minute. If the value is set to permanentSlaveWithBackup then a permanent connection will be established between the 2 ends . The remote end must be defined as a permanentMaster. The Connection cannot be established if the remote end is defined as anything else. The permanentSlaveWithBackup end will attempt to call once per minute. If the value is set to permanentBackupSlave then a permanent connection will be established between the 2 ends only if the permanentMaster end is disconnected from the permanentSlaveWithBackup end and a backup call is established by the redirection system. If the permanentSlaveWithBackup interface becomes visible again, the permanentBackupSlave end is disconnected and the permanentSlaveWithBackup end is reconnected to the permanentMaster end. The permanentBackupSlave end does not try to establish pvc call." DEFVAL { permanentMaster } ::= { gvcIfDlciDcOptionsEntry 6 }
gvcIfDlciDcType OBJECT-TYPE SYNTAX INTEGER { permanentMaster(1), permanentSlave(2), permanentBackupSlave(3), permanentSlaveWithBackup(4) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the type of Vc call: permanentMaster, permanentSlave, permanentSlaveWithBackup, permanentBackupSlave. If the value is set to permanentMaster, then a permanent connection will be established between 2 ends. The remote end must be defined as a permanentSlave, permanentBackupSlave or permanentSlaveWithBackup. The connection cannot be established if the remote end is defined as anything else. The end defined as permanentMaster always initiates the calls. It will attempt to call once per minute. If the value is set to permanentSlave then a permanent connection will be established between 2 ends. The remote end must be defined as a permanentMaster. The connection cannot be established if the remote end is defined as anything else. The permanentSlave end will attempt to call once per minute. If the value is set to permanentSlaveWithBackup then a permanent connection will be established between the 2 ends . The remote end must be defined as a permanentMaster. The Connection cannot be established if the remote end is defined as anything else. The permanentSlaveWithBackup end will attempt to call once per minute. If the value is set to permanentBackupSlave then a permanent connection will be established between the 2 ends only if the permanentMaster end is disconnected from the permanentSlaveWithBackup end and a backup call is established by the redirection system. If the permanentSlaveWithBackup interface becomes visible again, the permanentBackupSlave end is disconnected and the permanentSlaveWithBackup end is reconnected to the permanentMaster end. The permanentBackupSlave end does not try to establish pvc call." DEFVAL { permanentMaster } ::= { gvcIfDlciDcOptionsEntry 6 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.107.7.2.10.1.3 | gvcIfDlciDcRemoteNpi | 0 | 0 | This attribute specifies the numbering plan used in the remoteDna. |
| 1.3.6.1.4.1.562.2.4.1.107.7.2.10.1.4 | gvcIfDlciDcRemoteDna | 0 | 0 | This attribute specifies the Data Network Address (Dna) of the remote. This is the called (destination) DTE address (Dna) to whi… |
| 1.3.6.1.4.1.562.2.4.1.107.7.2.10.1.5 | gvcIfDlciDcRemoteDlci | 0 | 0 | This attribute specifies the remote DLCI (Logical Channel Number) - it is used only for PVCs, where attribute type is set to perm… |
| 1.3.6.1.4.1.562.2.4.1.107.7.2.10.1.9 | gvcIfDlciDcTransferPriority | 0 | 0 | This attribute specifies the transfer priority to network for the outgoing calls using this particular DLCI. It overRides the def… |
| 1.3.6.1.4.1.562.2.4.1.107.7.2.10.1.10 | gvcIfDlciDcDiscardPriority | 0 | 0 | This attribute specifies the discard priority for outgoing call using this DLCI. The discard priority has three provisioning val… |