The cost-per-connect time is a characteristic represented by a
single-byte value in the range 0 to 255 that expresses a relative cost
of using a transmission group. The units for cost-per-connect time
are installation-defined and are typically based on the applicable
tariffs of the transmission facility being used by the transmission
group. The cost-per-connect time values that a network
administrator assigns to the transmission groups in a network
should reflect the relative expense of each transmission group as
compared to all other transmission groups in the network. A value
of 0 means that the cost of connecting over the transmission group
is at no additional cost (as in the case of a non-switched facility.
Parsed from file nortelPP-appnV1_BG00S4C.mib.txt
Company: None
Module: Nortel-Magellan-Passport-AppnMIB
The cost-per-connect time is a characteristic represented by a
single-byte value in the range 0 to 255 that expresses a relative cost
of using a transmission group. The units for cost-per-connect time
are installation-defined and are typically based on the applicable
tariffs of the transmission facility being used by the transmission
group. The cost-per-connect time values that a network
administrator assigns to the transmission groups in a network
should reflect the relative expense of each transmission group as
compared to all other transmission groups in the network. A value
of 0 means that the cost of connecting over the transmission group
is at no additional cost (as in the case of a non-switched facility.
Parsed from file Nortel-Magellan-Passport-AppnMIB.mib
Module: Nortel-Magellan-Passport-AppnMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-Magellan-Passport-AppnMIB
[Automatically extracted from oidview.com]
appnLsConnectCost OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "The cost-per-connect time is a characteristic represented by a single-byte value in the range 0 to 255 that expresses a relative cost of using a transmission group. The units for cost-per-connect time are installation-defined and are typically based on the applicable tariffs of the transmission facility being used by the transmission group. The cost-per-connect time values that a network administrator assigns to the transmission groups in a network should reflect the relative expense of each transmission group as compared to all other transmission groups in the network. A value of 0 means that the cost of connecting over the transmission group is at no additional cost (as in the case of a non-switched facility." DEFVAL { 0 } ::= { appnLsTgCharEntry 2 }
appnLsConnectCost OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "The cost-per-connect time is a characteristic represented by a single-byte value in the range 0 to 255 that expresses a relative cost of using a transmission group. The units for cost-per-connect time are installation-defined and are typically based on the applicable tariffs of the transmission facility being used by the transmission group. The cost-per-connect time values that a network administrator assigns to the transmission groups in a network should reflect the relative expense of each transmission group as compared to all other transmission groups in the network. A value of 0 means that the cost of connecting over the transmission group is at no additional cost (as in the case of a non-switched facility." DEFVAL { 0 } ::= { appnLsTgCharEntry 2 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.110.6.13.1.1 | appnLsEffectiveCap | 0 | 0 | The effective capacity is an integer value that indicates the capacity in kilo bits per second. It is derived from the link band… |
| 1.3.6.1.4.1.562.2.4.1.110.6.13.1.3 | appnLsByteCost | 0 | 0 | Cost-per-byte is a single byte value in the range 0 to 255 that expresses a relative cost of transmitting a byte over the associ… |
| 1.3.6.1.4.1.562.2.4.1.110.6.13.1.4 | appnLsSecurity | 0 | 0 | This static characteristic indicates the level of security protection. The security values are architecturally defined to provid… |
| 1.3.6.1.4.1.562.2.4.1.110.6.13.1.5 | appnLsPropagationDelay | 0 | 0 | The propagation delay is the length of time that it takes for a signal to propagate from one end of the transmission group to th… |
| 1.3.6.1.4.1.562.2.4.1.110.6.13.1.7 | appnLsUserDefinedParm1 | 0 | 0 | This is the user defined routing parameter in range 0-255. |
| 1.3.6.1.4.1.562.2.4.1.110.6.13.1.8 | appnLsUserDefinedParm2 | 0 | 0 | This is the user defined routing parameter in range 0-255. |
| 1.3.6.1.4.1.562.2.4.1.110.6.13.1.9 | appnLsUserDefinedParm3 | 0 | 0 | This is the user defined routing parameter in range 0-255. |