This attribute is HISTORICAL. Please refer to the attribute of the
same name in the group AtmTmOper.
This attribute is a vector of five transmit traffic parameters. The first
three elements reflect the settings of the first three elements of the
txTrafficDescParm attribute in the AtmTrafficProv group.
When txTrafficDescType is 1 or 2, parameters 1 through 5 are
unused.
In this description, PCR is the greater of either the PCR or the
requested shaping rate (parameter 1 or parameter 5) specified in the
Traffic group under the Vcd or Vpd.
When txTrafficDescType is 3, parameter 1 represents the PCR for
CLP equal to 0 or 1 traffic; parameters 2 and 3 are unused.
When txTrafficDescType is 4, parameter 1 represents the PCR for
CLP equal to 0 and 1 traffic; parameter 2 represents the PCR for
CLP equal to 0 traffic with cell discard.
When txTrafficDescType is 5, parameter 1 represents the PCR for
CLP equal to 0 and 1 traffic; parameter 2 represents the PCR for
CLP equal to 0 traffic with cell tagging.
When txTrafficDescType is 6, parameter 1 represents the PCR for
CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for
CLP equal to 0 and 1 traffic; parameter 3 represents the MBS for
CLP equal to 0 and 1 traffic.
When txTrafficDescType is 7, parameter 1 represents the PCR for
CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for
CLP equal to 0 traffic with cell discard; parameter 3 represents the
MBS for CLP equal to 0 traffic.
When txTrafficDescType is 8, parameter 1 represents the PCR for
CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for
CLP equal to 0 traffic with cell tagging; parameter 3 represents the
MBS for CLP equal to 0 traffic
When txTrafficDescType is 3, 4, 5, 6, 7 or 8, parameter 4 reflects
the actual shaping rate in cell/s for this connection. This rate is one
of the set of available shaping rates for this type of ATM-FP, based
on the number of interfaces doing shaping (attribute
perVcQueueInterfaces), the provisioned cell rate, the
shapingScalingFactor attribute of the AtmResourceControl
component, and whether traffic shaping is enabled. A rate of zero
(0) indicates that shaping is not performed.
When txTrafficDescType is 3, 4, 5, 6, 7 or 8, parameter 5 reflects
the equivalent cell rate in cell/s for this connection as determined by
the Connection Admission Control (CAC) algorithm. The
equivalent cell rate is useful in determining the admission
characteristics of this connection.
Parsed from file nortelPP-atmCoreV1_BG00S4C.mib.txt
Company: None
Module: Nortel-Magellan-Passport-AtmCoreMIB
This attribute is HISTORICAL. Please refer to the attribute of the
same name in the group AtmTmOper.
This attribute is a vector of five transmit traffic parameters. The first
three elements reflect the settings of the first three elements of the
txTrafficDescParm attribute in the AtmTrafficProv group.
When txTrafficDescType is 1 or 2, parameters 1 through 5 are
unused.
In this description, PCR is the greater of either the PCR or the
requested shaping rate (parameter 1 or parameter 5) specified in the
Traffic group under the Vcd or Vpd.
When txTrafficDescType is 3, parameter 1 represents the PCR for
CLP equal to 0 or 1 traffic; parameters 2 and 3 are unused.
When txTrafficDescType is 4, parameter 1 represents the PCR for
CLP equal to 0 and 1 traffic; parameter 2 represents the PCR for
CLP equal to 0 traffic with cell discard.
When txTrafficDescType is 5, parameter 1 represents the PCR for
CLP equal to 0 and 1 traffic; parameter 2 represents the PCR for
CLP equal to 0 traffic with cell tagging.
When txTrafficDescType is 6, parameter 1 represents the PCR for
CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for
CLP equal to 0 and 1 traffic; parameter 3 represents the MBS for
CLP equal to 0 and 1 traffic.
When txTrafficDescType is 7, parameter 1 represents the PCR for
CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for
CLP equal to 0 traffic with cell discard; parameter 3 represents the
MBS for CLP equal to 0 traffic.
When txTrafficDescType is 8, parameter 1 represents the PCR for
CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for
CLP equal to 0 traffic with cell tagging; parameter 3 represents the
MBS for CLP equal to 0 traffic
When txTrafficDescType is 3, 4, 5, 6, 7 or 8, parameter 4 reflects
the actual shaping rate in cell/s for this connection. This rate is one
of the set of available shaping rates for this type of ATM-FP, based
on the number of interfaces doing shaping (attribute
perVcQueueInterfaces), the provisioned cell rate, the
shapingScalingFactor attribute of the AtmResourceControl
component, and whether traffic shaping is enabled. A rate of zero
(0) indicates that shaping is not performed.
When txTrafficDescType is 3, 4, 5, 6, 7 or 8, parameter 5 reflects
the equivalent cell rate in cell/s for this connection as determined by
the Connection Admission Control (CAC) algorithm. The
equivalent cell rate is useful in determining the admission
characteristics of this connection.
Parsed from file Nortel-Magellan-Passport-AtmCoreMIB.mib
Module: Nortel-Magellan-Passport-AtmCoreMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-Magellan-Passport-AtmCoreMIB
[Automatically extracted from oidview.com]
atmIfVptVccTxTdpTable OBJECT-TYPE SYNTAX SEQUENCE OF AtmIfVptVccTxTdpEntry ACCESS not-accessible STATUS obsolete DESCRIPTION "This attribute is HISTORICAL. Please refer to the attribute of the same name in the group AtmTmOper. This attribute is a vector of five transmit traffic parameters. The first three elements reflect the settings of the first three elements of the txTrafficDescParm attribute in the AtmTrafficProv group. When txTrafficDescType is 1 or 2, parameters 1 through 5 are unused. In this description, PCR is the greater of either the PCR or the requested shaping rate (parameter 1 or parameter 5) specified in the Traffic group under the Vcd or Vpd. When txTrafficDescType is 3, parameter 1 represents the PCR for CLP equal to 0 or 1 traffic; parameters 2 and 3 are unused. When txTrafficDescType is 4, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the PCR for CLP equal to 0 traffic with cell discard. When txTrafficDescType is 5, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the PCR for CLP equal to 0 traffic with cell tagging. When txTrafficDescType is 6, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 and 1 traffic; parameter 3 represents the MBS for CLP equal to 0 and 1 traffic. When txTrafficDescType is 7, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 traffic with cell discard; parameter 3 represents the MBS for CLP equal to 0 traffic. When txTrafficDescType is 8, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 traffic with cell tagging; parameter 3 represents the MBS for CLP equal to 0 traffic When txTrafficDescType is 3, 4, 5, 6, 7 or 8, parameter 4 reflects the actual shaping rate in cell/s for this connection. This rate is one of the set of available shaping rates for this type of ATM-FP, based on the number of interfaces doing shaping (attribute perVcQueueInterfaces), the provisioned cell rate, the shapingScalingFactor attribute of the AtmResourceControl component, and whether traffic shaping is enabled. A rate of zero (0) indicates that shaping is not performed. When txTrafficDescType is 3, 4, 5, 6, 7 or 8, parameter 5 reflects the equivalent cell rate in cell/s for this connection as determined by the Connection Admission Control (CAC) algorithm. The equivalent cell rate is useful in determining the admission characteristics of this connection." ::= { atmIfVptVcc 294 }
atmIfVptVccTxTdpTable OBJECT-TYPE SYNTAX SEQUENCE OF AtmIfVptVccTxTdpEntry ACCESS not-accessible STATUS obsolete DESCRIPTION "This attribute is HISTORICAL. Please refer to the attribute of the same name in the group AtmTmOper. This attribute is a vector of five transmit traffic parameters. The first three elements reflect the settings of the first three elements of the txTrafficDescParm attribute in the AtmTrafficProv group. When txTrafficDescType is 1 or 2, parameters 1 through 5 are unused. In this description, PCR is the greater of either the PCR or the requested shaping rate (parameter 1 or parameter 5) specified in the Traffic group under the Vcd or Vpd. When txTrafficDescType is 3, parameter 1 represents the PCR for CLP equal to 0 or 1 traffic; parameters 2 and 3 are unused. When txTrafficDescType is 4, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the PCR for CLP equal to 0 traffic with cell discard. When txTrafficDescType is 5, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the PCR for CLP equal to 0 traffic with cell tagging. When txTrafficDescType is 6, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 and 1 traffic; parameter 3 represents the MBS for CLP equal to 0 and 1 traffic. When txTrafficDescType is 7, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 traffic with cell discard; parameter 3 represents the MBS for CLP equal to 0 traffic. When txTrafficDescType is 8, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 traffic with cell tagging; parameter 3 represents the MBS for CLP equal to 0 traffic When txTrafficDescType is 3, 4, 5, 6, 7 or 8, parameter 4 reflects the actual shaping rate in cell/s for this connection. This rate is one of the set of available shaping rates for this type of ATM-FP, based on the number of interfaces doing shaping (attribute perVcQueueInterfaces), the provisioned cell rate, the shapingScalingFactor attribute of the AtmResourceControl component, and whether traffic shaping is enabled. A rate of zero (0) indicates that shaping is not performed. When txTrafficDescType is 3, 4, 5, 6, 7 or 8, parameter 5 reflects the equivalent cell rate in cell/s for this connection as determined by the Connection Admission Control (CAC) algorithm. The equivalent cell rate is useful in determining the admission characteristics of this connection." ::= { atmIfVptVcc 294 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.114.9.20.294.1 | atmIfVptVccTxTdpEntry | 2 | 2 | An entry in the atmIfVptVccTxTdpTable. |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.114.9.20.1 | atmIfVptVccRowStatusTable | 1 | 5 | This entry controls the addition and deletion of atmIfVptVcc components. |
| 1.3.6.1.4.1.562.2.4.1.114.9.20.2 | atmIfVptVccVcd | 9 | 118 | None |
| 1.3.6.1.4.1.562.2.4.1.114.9.20.3 | atmIfVptVccLoop | 1 | 6 | None |
| 1.3.6.1.4.1.562.2.4.1.114.9.20.4 | atmIfVptVccNrp | 2 | 15 | None |
| 1.3.6.1.4.1.562.2.4.1.114.9.20.5 | atmIfVptVccNep | 2 | 9 | None |
| 1.3.6.1.4.1.562.2.4.1.114.9.20.6 | atmIfVptVccTest | 4 | 34 | None |
| 1.3.6.1.4.1.562.2.4.1.114.9.20.7 | atmIfVptVccTm | 8 | 75 | None |
| 1.3.6.1.4.1.562.2.4.1.114.9.20.8 | atmIfVptVccSrc | 3 | 19 | None |
| 1.3.6.1.4.1.562.2.4.1.114.9.20.9 | atmIfVptVccEp | 2 | 9 | None |
| 1.3.6.1.4.1.562.2.4.1.114.9.20.10 | atmIfVptVccRp | 3 | 12 | None |
| 1.3.6.1.4.1.562.2.4.1.114.9.20.11 | atmIfVptVccDst | 2 | 11 | None |
| 1.3.6.1.4.1.562.2.4.1.114.9.20.100 | atmIfVptVccStateTable | 1 | 4 | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies abou… |
| 1.3.6.1.4.1.562.2.4.1.114.9.20.110 | atmIfVptVccOperTable | 1 | 2 | This group contains operational information for a Vcc, Vpc, or Vpt component. |
| 1.3.6.1.4.1.562.2.4.1.114.9.20.115 | atmIfVptVccConnInfoTable | 1 | 4 | This group contains operational connection characteristics information for a Vcc component. |
| 1.3.6.1.4.1.562.2.4.1.114.9.20.120 | atmIfVptVccStatusTable | 1 | 10 | This group contains operational status information for a Vcc, Vpc, or Vpt component. |
| 1.3.6.1.4.1.562.2.4.1.114.9.20.130 | atmIfVptVccTrafficTable | 1 | 22 | This group is HISTORICAL. Please refer to the group AtmTmOper; This attribute group contains attributes for the Vcc and Vpc comp… |
| 1.3.6.1.4.1.562.2.4.1.114.9.20.140 | atmIfVptVccStatsTable | 1 | 23 | This group contains traffic statistics for a Vcc, Vpc, or Vpt component. |
| 1.3.6.1.4.1.562.2.4.1.114.9.20.295 | atmIfVptVccRxTdpTable | 1 | 3 | This attribute is HISTORICAL. Please refer to the attribute of the same name in the group AtmTmOper. This attribute is a vector … |
| 1.3.6.1.4.1.562.2.4.1.114.9.20.352 | atmIfVptVccTxQThreshTable | 1 | 3 | atmIfVptVccTxQThreshtable |
| 1.3.6.1.4.1.562.2.4.1.114.9.20.357 | atmIfVptVccFqpTable | 1 | 3 | This attribute is HISTORICAL. Please refer to the attribute of the same name in the group AtmTmOper. This attribute is a vector … |
| 1.3.6.1.4.1.562.2.4.1.114.9.20.358 | atmIfVptVccBqpTable | 1 | 3 | This attribute is HISTORICAL. Please refer to the attribute of the same name in the group AtmTmOper. This attribute is a vector … |