This attribute, together with the forceNpiTon attribute, controls
Numbering Plan Identifier (NPI) and Type Of Number (TON)
values to be used by the SigChan component for egress calls (if
applicable).
The combination of NPI and TON values defined by the
defaultNpiTon attribute is used for an egress call whenever:
- the call setup message received from subnet indicates that NPI or
TON information is not supplied or doesn't make sense, or
- attribute forceNpiTon is set to yes
Mapping between values of the defaultNpiTon attribute and
associated combinations of NPI and TON values follows:
casUnknown: NPI=unknown (0) TON=unknown (0)
unknown: NPI=E.164 (1) TON=unknown (0)
international: NPI=E.164 (1) TON=international (1)
national: NPI=E.164 (1) TON=national (2)
subscriber: NPI=E.164 (1) TON=subscriber (4)
p0: NPI=private(9) TON=0
p1: NPI=private(9) TON=1
p2: NPI=private(9) TON=2
p3: NPI=private(9) TON=3
p4: NPI=private(9) TON=4
p5: NPI=private(9) TON=5
p6: NPI=private(9) TON=6
p7: NPI=private(9) TON=7
Parsed from file nortelPP-voiceNetworkingV1_BG00S4C.mib.txt
Company: None
Module: Nortel-Magellan-Passport-VoiceNetworkingMIB
This attribute, together with the forceNpiTon attribute, controls
Numbering Plan Identifier (NPI) and Type Of Number (TON)
values to be used by the SigChan component for egress calls (if
applicable).
The combination of NPI and TON values defined by the
defaultNpiTon attribute is used for an egress call whenever:
- the call setup message received from subnet indicates that NPI or
TON information is not supplied or doesn't make sense, or
- attribute forceNpiTon is set to yes
Mapping between values of the defaultNpiTon attribute and
associated combinations of NPI and TON values follows:
casUnknown: NPI=unknown (0) TON=unknown (0)
unknown: NPI=E.164 (1) TON=unknown (0)
international: NPI=E.164 (1) TON=international (1)
national: NPI=E.164 (1) TON=national (2)
subscriber: NPI=E.164 (1) TON=subscriber (4)
p0: NPI=private(9) TON=0
p1: NPI=private(9) TON=1
p2: NPI=private(9) TON=2
p3: NPI=private(9) TON=3
p4: NPI=private(9) TON=4
p5: NPI=private(9) TON=5
p6: NPI=private(9) TON=6
p7: NPI=private(9) TON=7
Parsed from file Nortel-Magellan-Passport-VoiceNetworkingMIB.mib
Module: Nortel-Magellan-Passport-VoiceNetworkingMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-Magellan-Passport-VoiceNetworkingMIB
[Automatically extracted from oidview.com]
sigChanDefaultNpiTon OBJECT-TYPE SYNTAX INTEGER { unknown(0), international(1), national(2), subscriber(3), p0(4), p1(5), p2(6), p3(7), p4(8), p5(9), p6(10), p7(11), casUnknown(12) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute, together with the forceNpiTon attribute, controls Numbering Plan Identifier (NPI) and Type Of Number (TON) values to be used by the SigChan component for egress calls (if applicable). The combination of NPI and TON values defined by the defaultNpiTon attribute is used for an egress call whenever: - the call setup message received from subnet indicates that NPI or TON information is not supplied or doesn't make sense, or - attribute forceNpiTon is set to yes Mapping between values of the defaultNpiTon attribute and associated combinations of NPI and TON values follows: casUnknown: NPI=unknown (0) TON=unknown (0) unknown: NPI=E.164 (1) TON=unknown (0) international: NPI=E.164 (1) TON=international (1) national: NPI=E.164 (1) TON=national (2) subscriber: NPI=E.164 (1) TON=subscriber (4) p0: NPI=private(9) TON=0 p1: NPI=private(9) TON=1 p2: NPI=private(9) TON=2 p3: NPI=private(9) TON=3 p4: NPI=private(9) TON=4 p5: NPI=private(9) TON=5 p6: NPI=private(9) TON=6 p7: NPI=private(9) TON=7" DEFVAL { casUnknown } ::= { sigChanProvEntry 4 }
sigChanDefaultNpiTon OBJECT-TYPE SYNTAX INTEGER { unknown(0), international(1), national(2), subscriber(3), p0(4), p1(5), p2(6), p3(7), p4(8), p5(9), p6(10), p7(11), casUnknown(12) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute, together with the forceNpiTon attribute, controls Numbering Plan Identifier (NPI) and Type Of Number (TON) values to be used by the SigChan component for egress calls (if applicable). The combination of NPI and TON values defined by the defaultNpiTon attribute is used for an egress call whenever: - the call setup message received from subnet indicates that NPI or TON information is not supplied or doesn't make sense, or - attribute forceNpiTon is set to yes Mapping between values of the defaultNpiTon attribute and associated combinations of NPI and TON values follows: casUnknown: NPI=unknown (0) TON=unknown (0) unknown: NPI=E.164 (1) TON=unknown (0) international: NPI=E.164 (1) TON=international (1) national: NPI=E.164 (1) TON=national (2) subscriber: NPI=E.164 (1) TON=subscriber (4) p0: NPI=private(9) TON=0 p1: NPI=private(9) TON=1 p2: NPI=private(9) TON=2 p3: NPI=private(9) TON=3 p4: NPI=private(9) TON=4 p5: NPI=private(9) TON=5 p6: NPI=private(9) TON=6 p7: NPI=private(9) TON=7" DEFVAL { casUnknown } ::= { sigChanProvEntry 4 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.562.2.4.1.115.104.1.1 | sigChanCommentText | 0 | 0 | Use of this attribute is at the discretion of the system administrator. Typically, this attribute specifies the name of the cust… |
1.3.6.1.4.1.562.2.4.1.115.104.1.2 | sigChanOctothorpeEod | 0 | 0 | This attribute specifies whether the octothorpe should be used as an end of dialling indication. When this character is received… |
1.3.6.1.4.1.562.2.4.1.115.104.1.3 | sigChanForceNpiTon | 0 | 0 | This attribute, together with the defaultNpiTon attribute, controls Numbering Plan Identifier (NPI) and Type Of Number (TON) valu… |