The state of the line signals required to indicate that the external
equipment is in a good state (that is, data transfer can proceed).
Note that both DTE and DCE signals are specified in this attribute.
The appropriate set of specified signals will be turned on or checked
according to the actualLinkMode. The value of this attribute must
be a superset of that of the readyLineState attribute.
See also linkMode.
Description of bits:
indication(0)
control(1)
Parsed from file nortelPP-logicalProcessorV1_BG00S4C.mib.txt
Company: None
Module: Nortel-Magellan-Passport-LogicalProcessorMIB
The state of the line signals required to indicate that the external
equipment is in a good state (that is, data transfer can proceed).
Note that both DTE and DCE signals are specified in this attribute.
The appropriate set of specified signals will be turned on or checked
according to the actualLinkMode. The value of this attribute must
be a superset of that of the readyLineState attribute.
See also linkMode.
Description of bits:
indication(0)
control(1)
Parsed from file Nortel-Magellan-Passport-LogicalProcessorMIB.mib
Module: Nortel-Magellan-Passport-LogicalProcessorMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-Magellan-Passport-LogicalProcessorMIB
[Automatically extracted from oidview.com]
lpX21DataTransferLineState OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1)) ACCESS read-write STATUS mandatory DESCRIPTION "The state of the line signals required to indicate that the external equipment is in a good state (that is, data transfer can proceed). Note that both DTE and DCE signals are specified in this attribute. The appropriate set of specified signals will be turned on or checked according to the actualLinkMode. The value of this attribute must be a superset of that of the readyLineState attribute. See also linkMode. Description of bits: indication(0) control(1)" DEFVAL { 'c0'H } ::= { lpX21ProvEntry 3 }
lpX21DataTransferLineState OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1)) ACCESS read-write STATUS mandatory DESCRIPTION "The state of the line signals required to indicate that the external equipment is in a good state (that is, data transfer can proceed). Note that both DTE and DCE signals are specified in this attribute. The appropriate set of specified signals will be turned on or checked according to the actualLinkMode. The value of this attribute must be a superset of that of the readyLineState attribute. See also linkMode. Description of bits: indication(0) control(1)" DEFVAL { 'c0'H } ::= { lpX21ProvEntry 3 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.12.10.10.1.1 | lpX21LinkMode | 0 | 0 | This attribute defines the intended gender of the X21 component (V.11 interface). The actual gender of the interface is determin… |
| 1.3.6.1.4.1.562.2.4.1.12.10.10.1.2 | lpX21ReadyLineState | 0 | 0 | This attribute specifies the line signals originating from the V.11 interface that will always be turned on, provided the interf… |
| 1.3.6.1.4.1.562.2.4.1.12.10.10.1.4 | lpX21LineStatusTimeOut | 0 | 0 | This attribute defines the time the line state must be stable (good or bad) before a state change is declared. |
| 1.3.6.1.4.1.562.2.4.1.12.10.10.1.5 | lpX21LineSpeed | 0 | 0 | This attribute defines the speed of the line for source clocking. This attribute is ignored if the interface is not providing a … |
| 1.3.6.1.4.1.562.2.4.1.12.10.10.1.6 | lpX21ClockingSource | 0 | 0 | This attribute defines the source of synchronization of the outgoing clocks. This attribute is only used when the actualLinkMode… |
| 1.3.6.1.4.1.562.2.4.1.12.10.10.1.7 | lpX21DteDataClockSource | 0 | 0 | This attribute is only used when the actualLinkMode is dce. It is used to determine the clock to be used to recover the receive … |
| 1.3.6.1.4.1.562.2.4.1.12.10.10.1.8 | lpX21LineTerminationRequired | 0 | 0 | This attribute specifies whether termination is required for this interface. If the hardware setup does not match this attribute… |
| 1.3.6.1.4.1.562.2.4.1.12.10.10.1.9 | lpX21ApplicationFramerName | 0 | 0 | This attribute contains the component name of a Framer which is associated with the X21 component. |
| 1.3.6.1.4.1.562.2.4.1.12.10.10.1.10 | lpX21EnableDynamicSpeed | 0 | 0 | When set to yes, this attribute specifies that the transmit link speed should be set to the calculated receiver link speed. This… |