This attribute displays whether an Path Alarm Indication Signal (P-
AIS) alarm state has been entered. An P-AIS alarm state is entered
when P-AIS defects have been observed and accumulated for a
period of 2.5 seconds +/- 0.5 seconds. The P-AIS defect is the
occurrence of the P-AIS signal in three contiguous valid STS or
STM frames (all one's in bytes H1 and H2). If the P-AIS defects are
intermittently occurring, the P-AIS defect accumulator is
decremented at a rate of 1/10 of the incrementing rate (alarm
integration ratio of 1/10), with all measurements based on a 200 ms
polling cycle.
The Path component goes into an operational state of disabled until
the P-AIS alarm condition is cleared. The condition is cleared after
no P-AIS defect has been detected for 10 seconds +/- 0.5 seconds.
The rxAisAlarm attribute is always set to off when the Path
component has been locked and left offline by the operator or when
the Path component has been suspended since the parent component
has been locked.
Parsed from file nortelPP-logicalProcessorV1_BG00S4C.mib.txt
Company: None
Module: Nortel-Magellan-Passport-LogicalProcessorMIB
This attribute displays whether an Path Alarm Indication Signal (P-
AIS) alarm state has been entered. An P-AIS alarm state is entered
when P-AIS defects have been observed and accumulated for a
period of 2.5 seconds +/- 0.5 seconds. The P-AIS defect is the
occurrence of the P-AIS signal in three contiguous valid STS or
STM frames (all one's in bytes H1 and H2). If the P-AIS defects are
intermittently occurring, the P-AIS defect accumulator is
decremented at a rate of 1/10 of the incrementing rate (alarm
integration ratio of 1/10), with all measurements based on a 200 ms
polling cycle.
The Path component goes into an operational state of disabled until
the P-AIS alarm condition is cleared. The condition is cleared after
no P-AIS defect has been detected for 10 seconds +/- 0.5 seconds.
The rxAisAlarm attribute is always set to off when the Path
component has been locked and left offline by the operator or when
the Path component has been suspended since the parent component
has been locked.
Parsed from file Nortel-Magellan-Passport-LogicalProcessorMIB.mib
Module: Nortel-Magellan-Passport-LogicalProcessorMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-Magellan-Passport-LogicalProcessorMIB
[Automatically extracted from oidview.com]
lpSonetPathRxAisAlarm OBJECT-TYPE SYNTAX INTEGER { on(0), off(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays whether an Path Alarm Indication Signal (P- AIS) alarm state has been entered. An P-AIS alarm state is entered when P-AIS defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. The P-AIS defect is the occurrence of the P-AIS signal in three contiguous valid STS or STM frames (all one's in bytes H1 and H2). If the P-AIS defects are intermittently occurring, the P-AIS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Path component goes into an operational state of disabled until the P-AIS alarm condition is cleared. The condition is cleared after no P-AIS defect has been detected for 10 seconds +/- 0.5 seconds. The rxAisAlarm attribute is always set to off when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked." ::= { lpSonetPathOperEntry 2 }
lpSonetPathRxAisAlarm OBJECT-TYPE SYNTAX INTEGER { on(0), off(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays whether an Path Alarm Indication Signal (P- AIS) alarm state has been entered. An P-AIS alarm state is entered when P-AIS defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. The P-AIS defect is the occurrence of the P-AIS signal in three contiguous valid STS or STM frames (all one's in bytes H1 and H2). If the P-AIS defects are intermittently occurring, the P-AIS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Path component goes into an operational state of disabled until the P-AIS alarm condition is cleared. The condition is cleared after no P-AIS defect has been detected for 10 seconds +/- 0.5 seconds. The rxAisAlarm attribute is always set to off when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked." ::= { lpSonetPathOperEntry 2 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.12.14.2.15.1.1 | lpSonetPathLopAlarm | 0 | 0 | This attribute displays whether a Loss Of Pointer (LOP) alarm state has been entered. An LOP alarm state is entered when LOP def… |
| 1.3.6.1.4.1.562.2.4.1.12.14.2.15.1.3 | lpSonetPathRxRfiAlarm | 0 | 0 | This attribute displays whether the Path Remote Failure Indication (P-RFI) alarm state has been entered. An P-RFI alarm state is… |
| 1.3.6.1.4.1.562.2.4.1.12.14.2.15.1.4 | lpSonetPathSignalLabelMismatch | 0 | 0 | This attribute displays whether the Path Signal Label Mismatch (P- SLM) failure condition has been entered. An P-SLM failure cond… |
| 1.3.6.1.4.1.562.2.4.1.12.14.2.15.1.5 | lpSonetPathTxAis | 0 | 0 | lpSonetPathtxAis |
| 1.3.6.1.4.1.562.2.4.1.12.14.2.15.1.6 | lpSonetPathTxRdi | 0 | 0 | lpSonetPathtxRdi |