This attribute specifies what protocol the component should run.
If atmForum10 is chosen, the ATM Forum's IMA protocol (version
1.0) will be used and signalled in outgoing IMA Control Protocol
(ICP) cells. This protocol is specified in version 1.1 of the ATM
Forum IMA specification. The IMA group will come up only if the
far end IMA also uses the ATM Forum's IMA protocol.
If proprietary is chosen, Nortel's proprietary IMA protocol will be
used. The IMA group will come up only if the far end IMA also
uses Nortel's proprietary IMA protocol. This IMA group will not
inter-operate with IMA implementations from other vendors.
Feature ima must be provisioned on the LP for this protocol to be
used.
Parsed from file nortelPP-imaV1_BG00S4C.mib.txt
Company: None
Module: Nortel-Magellan-Passport-ImaMIB
This attribute specifies what protocol the component should run.
If atmForum10 is chosen, the ATM Forum's IMA protocol (version
1.0) will be used and signalled in outgoing IMA Control Protocol
(ICP) cells. This protocol is specified in version 1.1 of the ATM
Forum IMA specification. The IMA group will come up only if the
far end IMA also uses the ATM Forum's IMA protocol.
If proprietary is chosen, Nortel's proprietary IMA protocol will be
used. The IMA group will come up only if the far end IMA also
uses Nortel's proprietary IMA protocol. This IMA group will not
inter-operate with IMA implementations from other vendors.
Feature ima must be provisioned on the LP for this protocol to be
used.
Parsed from file Nortel-Magellan-Passport-ImaMIB.mib
Module: Nortel-Magellan-Passport-ImaMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-Magellan-Passport-ImaMIB
[Automatically extracted from oidview.com]
lpImaProtocol OBJECT-TYPE SYNTAX INTEGER { atmForum10(0), proprietary(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies what protocol the component should run. If atmForum10 is chosen, the ATM Forum's IMA protocol (version 1.0) will be used and signalled in outgoing IMA Control Protocol (ICP) cells. This protocol is specified in version 1.1 of the ATM Forum IMA specification. The IMA group will come up only if the far end IMA also uses the ATM Forum's IMA protocol. If proprietary is chosen, Nortel's proprietary IMA protocol will be used. The IMA group will come up only if the far end IMA also uses Nortel's proprietary IMA protocol. This IMA group will not inter-operate with IMA implementations from other vendors. Feature ima must be provisioned on the LP for this protocol to be used." DEFVAL { atmForum10 } ::= { lpImaProvEntry 6 }
lpImaProtocol OBJECT-TYPE SYNTAX INTEGER { atmForum10(0), proprietary(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies what protocol the component should run. If atmForum10 is chosen, the ATM Forum's IMA protocol (version 1.0) will be used and signalled in outgoing IMA Control Protocol (ICP) cells. This protocol is specified in version 1.1 of the ATM Forum IMA specification. The IMA group will come up only if the far end IMA also uses the ATM Forum's IMA protocol. If proprietary is chosen, Nortel's proprietary IMA protocol will be used. The IMA group will come up only if the far end IMA also uses Nortel's proprietary IMA protocol. This IMA group will not inter-operate with IMA implementations from other vendors. Feature ima must be provisioned on the LP for this protocol to be used." DEFVAL { atmForum10 } ::= { lpImaProvEntry 6 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.12.22.10.1.1 | lpImaLinkSelectionCriterion | 0 | 0 | This attribute specifies the method to be used by the IMA group when selecting links to be activated. This comes into effect onl… |
| 1.3.6.1.4.1.562.2.4.1.12.22.10.1.2 | lpImaMaxDiffDelay | 0 | 0 | This attribute specifies the maximum differential delay (in milliseconds) between links acceptable in the IMA group. If a link vi… |
| 1.3.6.1.4.1.562.2.4.1.12.22.10.1.3 | lpImaLinkRetryTimeout | 0 | 0 | This attribute specifies the amount of time (in seconds) before reactivation of a link is attempted after it recovers from a fai… |
| 1.3.6.1.4.1.562.2.4.1.12.22.10.1.4 | lpImaApplicationFramerName | 0 | 0 | This attribute defines the link to the AtmIf component using the Ima. An example is AtmIf/31. |
| 1.3.6.1.4.1.562.2.4.1.12.22.10.1.5 | lpImaTransmitClockMode | 0 | 0 | This attribute specifies the transmit clocking mode. If itc (Independent Transmit Clock) is chosen, the physical ports used by th… |