This attribute indicates the current number of transmit cells which
are in use for this FP.
On CQC-based ATM FPs, this number indicates the total transmit
cells which are in use for all ports on this FP.
On ATM IP FPs, this number indicates the number of transmit cells
which are in use in the Passport Queue Controller (PQC) ASIC.
Queuing of ATM cells for transmit normally occurs in the ATM
Queue Manager (AQM) ASIC, which is indicated in the Lp Eng Arc
Aqm/x txCellMemoryUsage attribute. Transmit cells should only be
queued in the PQC under circumstances of extreme transient
congestion.
Parsed from file nortelPP-atmBaseV1_BG00S4C.mib.txt
Company: None
Module: Nortel-Magellan-Passport-AtmBaseMIB
This attribute indicates the current number of transmit cells which
are in use for this FP.
On CQC-based ATM FPs, this number indicates the total transmit
cells which are in use for all ports on this FP.
On ATM IP FPs, this number indicates the number of transmit cells
which are in use in the Passport Queue Controller (PQC) ASIC.
Queuing of ATM cells for transmit normally occurs in the ATM
Queue Manager (AQM) ASIC, which is indicated in the Lp Eng Arc
Aqm/x txCellMemoryUsage attribute. Transmit cells should only be
queued in the PQC under circumstances of extreme transient
congestion.
Parsed from file Nortel-Magellan-Passport-AtmBaseMIB.mib
Module: Nortel-Magellan-Passport-AtmBaseMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-Magellan-Passport-AtmBaseMIB
[Automatically extracted from oidview.com]
lpEngArcTxCellMemoryUsage OBJECT-TYPE SYNTAX Gauge32 (0..163839) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the current number of transmit cells which are in use for this FP. On CQC-based ATM FPs, this number indicates the total transmit cells which are in use for all ports on this FP. On ATM IP FPs, this number indicates the number of transmit cells which are in use in the Passport Queue Controller (PQC) ASIC. Queuing of ATM cells for transmit normally occurs in the ATM Queue Manager (AQM) ASIC, which is indicated in the Lp Eng Arc Aqm/x txCellMemoryUsage attribute. Transmit cells should only be queued in the PQC under circumstances of extreme transient congestion." ::= { lpEngArcOperEntry 14 }
lpEngArcTxCellMemoryUsage OBJECT-TYPE SYNTAX Gauge32 (0..163839) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the current number of transmit cells which are in use for this FP. On CQC-based ATM FPs, this number indicates the total transmit cells which are in use for all ports on this FP. On ATM IP FPs, this number indicates the number of transmit cells which are in use in the Passport Queue Controller (PQC) ASIC. Queuing of ATM cells for transmit normally occurs in the ATM Queue Manager (AQM) ASIC, which is indicated in the Lp Eng Arc Aqm/x txCellMemoryUsage attribute. Transmit cells should only be queued in the PQC under circumstances of extreme transient congestion." ::= { lpEngArcOperEntry 14 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.12.23.5.10.1.1 | lpEngArcTotalConnectionPoolAvailable | 0 | 0 | This attribute indicates the number of connection resources available (VCC, VPC, and VPT) that can be used on this FP. A standar… |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.10.1.2 | lpEngArcTotalConnectionPoolUsage | 0 | 0 | This attribute indicates the number of connection resources (VCC, VPC, and VPT) in use on this FP. A standard Vpt uses 3 connect… |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.10.1.3 | lpEngArcMulticastBranchesAvailable | 0 | 0 | This attribute indicates the total number of multicast branches that are available on this FP. |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.10.1.4 | lpEngArcMulticastBranchesUsage | 0 | 0 | This attribute indicates the total number of multicast branches that are active on this FP. |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.10.1.5 | lpEngArcTxCellMemoryAllocation | 0 | 0 | This attribute indicates the fraction of the transmit memory which is allocated for the transmission of cells on the FP. Cell me… |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.10.1.6 | lpEngArcTxCellMemoryAvailable | 0 | 0 | This attribute indicates the current availability of the transmit cell memory. The transmit cell memory is the memory available… |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.10.1.7 | lpEngArcTxCellMemoryMinAvailable | 0 | 0 | This attribute indicates the lowest availability of the transmit cell memory. The transmit cell memory is the memory available f… |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.10.1.8 | lpEngArcTxCellMemoryCongestionState | 0 | 0 | This attribute indicates the congestion state of the transmit cell memory for this FP. This attribute indicates which txCellMemo… |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.10.1.9 | lpEngArcRxCellMemoryAllocation | 0 | 0 | This attribute indicates the fraction of the receive memory which is allocated for the reception of cells on the FP. Cell memor… |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.10.1.10 | lpEngArcRxCellMemoryAvailable | 0 | 0 | This attribute indicates the current availability of the receive cell memory. The receive cell memory is the memory available f… |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.10.1.11 | lpEngArcRxCellMemoryMinAvailable | 0 | 0 | This attribute indicates the lowest availability of the receive cell memory. The receive cell memory is the memory available fo… |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.10.1.12 | lpEngArcRxCellMemoryCongestionState | 0 | 0 | This attribute indicates the congestion state of the receive cell memory on this FP. This attribute indicates which rxCellMemory… |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.10.1.13 | lpEngArcTxCellMemoryMaxUsage | 0 | 0 | This attribute indicates the maximum number which has recently occurred for the txCellMemoryUsage attribute. On CQC-based ATM FP… |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.10.1.15 | lpEngArcRxCellMemoryMaxUsage | 0 | 0 | This attribute indicates the maximum usage of receive cells for all ports on this FP. Receive cell memory is used for storing AT… |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.10.1.16 | lpEngArcRxCellMemoryUsage | 0 | 0 | This attribute indicates the current number of receive cells which are in use for all ports on this FP. Receive cell memory is u… |