This attribute indicates whether a LOF (Loss of Frame) alarm state
has been entered. The LOF alarm state is entered when LOF defects
(2 out of 5 framing bits in error ) have been detected for 3 seconds
+/- 0.5 seconds. If the LOF defects are intermittently occurring, the
LOF defect accumulator is decremented at a rate of 1/10 of the
incrementing rate (alarm integration ratio of 1/10), with all
measurements based on a 200 ms polling cycle. This tributary goes
into an operationalState of disabled until the LOF alarm state is
cleared. Also, an RAI alarm is transmitted to the far end for the
duration of the LOF alarm state
The condition is cleared when framing has been achieved for 10
seconds +/- 0.5 seconds.
Parsed from file nortelPP-logicalProcessorV1_BG00S4C.mib.txt
Company: None
Module: Nortel-Magellan-Passport-LogicalProcessorMIB
This attribute indicates whether a LOF (Loss of Frame) alarm state
has been entered. The LOF alarm state is entered when LOF defects
(2 out of 5 framing bits in error ) have been detected for 3 seconds
+/- 0.5 seconds. If the LOF defects are intermittently occurring, the
LOF defect accumulator is decremented at a rate of 1/10 of the
incrementing rate (alarm integration ratio of 1/10), with all
measurements based on a 200 ms polling cycle. This tributary goes
into an operationalState of disabled until the LOF alarm state is
cleared. Also, an RAI alarm is transmitted to the far end for the
duration of the LOF alarm state
The condition is cleared when framing has been achieved for 10
seconds +/- 0.5 seconds.
Parsed from file Nortel-Magellan-Passport-LogicalProcessorMIB.mib
Module: Nortel-Magellan-Passport-LogicalProcessorMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-Magellan-Passport-LogicalProcessorMIB
[Automatically extracted from oidview.com]
lpDS3DS1LofAlarm OBJECT-TYPE SYNTAX INTEGER { on(0), off(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates whether a LOF (Loss of Frame) alarm state has been entered. The LOF alarm state is entered when LOF defects (2 out of 5 framing bits in error ) have been detected for 3 seconds +/- 0.5 seconds. If the LOF defects are intermittently occurring, the LOF defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. This tributary goes into an operationalState of disabled until the LOF alarm state is cleared. Also, an RAI alarm is transmitted to the far end for the duration of the LOF alarm state The condition is cleared when framing has been achieved for 10 seconds +/- 0.5 seconds." DEFVAL { off } ::= { lpDS3DS1OperEntry 2 }
lpDS3DS1LofAlarm OBJECT-TYPE SYNTAX INTEGER { on(0), off(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates whether a LOF (Loss of Frame) alarm state has been entered. The LOF alarm state is entered when LOF defects (2 out of 5 framing bits in error ) have been detected for 3 seconds +/- 0.5 seconds. If the LOF defects are intermittently occurring, the LOF defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. This tributary goes into an operationalState of disabled until the LOF alarm state is cleared. Also, an RAI alarm is transmitted to the far end for the duration of the LOF alarm state The condition is cleared when framing has been achieved for 10 seconds +/- 0.5 seconds." DEFVAL { off } ::= { lpDS3DS1OperEntry 2 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.12.5.6.16.1.1 | lpDS3DS1RxAisAlarm | 0 | 0 | This attribute indicates whether an AIS (Alarm Indication Signal) alarm state has been entered. The AIS Alarm state is entered w… |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.16.1.3 | lpDS3DS1RxRaiAlarm | 0 | 0 | This attribute indicates whether an RAI (Remote Alarm Indication) alarm state has been entered. An RAI alarm state is entered wh… |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.16.1.4 | lpDS3DS1TxAisAlarm | 0 | 0 | This attribute indicates whether an AIS (Alarm Indication Signal) alarm is being transmitted on the line. An AIS alarm is transm… |
| 1.3.6.1.4.1.562.2.4.1.12.5.6.16.1.5 | lpDS3DS1TxRaiAlarm | 0 | 0 | This attribute indicates whether a RAI signal is being sent on the outgoing line. The RAI signal is transmitted when the tributa… |