This attribute defines the method of sending a RAI (Remote Alarm
Indication) alarm on a DS1 line.
When SBit is selected, RAI alarm is sent by setting the S bit in
frame 12.
When Bit2 is selected, RAI alarm is sent by setting bit 2 in all
timeslots to 0.
When fdl is selected, RAI alarm is sent by a repeating pattern of 00
hex and FF hex on the FDL link.
Note that for lineType of d4, only the SBit and the Bit2 methods are
applicable. Whereas for lineType of esf, only the Bit2 and the fdl
methods are applicable.
SBit method is recommended if lineType is set to d4 and
zeroCoding is set to ami. This will help to avoid potential mimic
RAI alarm when 1's density is too low in the data transmitted.
For cell-based cards only the default value fdl is permitted.
Parsed from file nortelPP-logicalProcessorV1_BG00S4C.mib.txt
Company: None
Module: Nortel-Magellan-Passport-LogicalProcessorMIB
This attribute defines the method of sending a RAI (Remote Alarm
Indication) alarm on a DS1 line.
When SBit is selected, RAI alarm is sent by setting the S bit in
frame 12.
When Bit2 is selected, RAI alarm is sent by setting bit 2 in all
timeslots to 0.
When fdl is selected, RAI alarm is sent by a repeating pattern of 00
hex and FF hex on the FDL link.
Note that for lineType of d4, only the SBit and the Bit2 methods are
applicable. Whereas for lineType of esf, only the Bit2 and the fdl
methods are applicable.
SBit method is recommended if lineType is set to d4 and
zeroCoding is set to ami. This will help to avoid potential mimic
RAI alarm when 1's density is too low in the data transmitted.
For cell-based cards only the default value fdl is permitted.
Parsed from file Nortel-Magellan-Passport-LogicalProcessorMIB.mib
Module: Nortel-Magellan-Passport-LogicalProcessorMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-Magellan-Passport-LogicalProcessorMIB
[Automatically extracted from oidview.com]
lpDS1RaiAlarmType OBJECT-TYPE SYNTAX INTEGER { sBit(0), bit2(1), fdl(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute defines the method of sending a RAI (Remote Alarm Indication) alarm on a DS1 line. When SBit is selected, RAI alarm is sent by setting the S bit in frame 12. When Bit2 is selected, RAI alarm is sent by setting bit 2 in all timeslots to 0. When fdl is selected, RAI alarm is sent by a repeating pattern of 00 hex and FF hex on the FDL link. Note that for lineType of d4, only the SBit and the Bit2 methods are applicable. Whereas for lineType of esf, only the Bit2 and the fdl methods are applicable. SBit method is recommended if lineType is set to d4 and zeroCoding is set to ami. This will help to avoid potential mimic RAI alarm when 1's density is too low in the data transmitted. For cell-based cards only the default value fdl is permitted." DEFVAL { fdl } ::= { lpDS1ProvEntry 4 }
lpDS1RaiAlarmType OBJECT-TYPE SYNTAX INTEGER { sBit(0), bit2(1), fdl(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute defines the method of sending a RAI (Remote Alarm Indication) alarm on a DS1 line. When SBit is selected, RAI alarm is sent by setting the S bit in frame 12. When Bit2 is selected, RAI alarm is sent by setting bit 2 in all timeslots to 0. When fdl is selected, RAI alarm is sent by a repeating pattern of 00 hex and FF hex on the FDL link. Note that for lineType of d4, only the SBit and the Bit2 methods are applicable. Whereas for lineType of esf, only the Bit2 and the fdl methods are applicable. SBit method is recommended if lineType is set to d4 and zeroCoding is set to ami. This will help to avoid potential mimic RAI alarm when 1's density is too low in the data transmitted. For cell-based cards only the default value fdl is permitted." DEFVAL { fdl } ::= { lpDS1ProvEntry 4 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.12.7.10.1.1 | lpDS1LineType | 0 | 0 | This attribute defines the framing of the DS1 line. d4 defines a framing pattern of 12 frames per multiframe. esf defines a frami… |
| 1.3.6.1.4.1.562.2.4.1.12.7.10.1.2 | lpDS1ZeroCoding | 0 | 0 | This attribute defines the zero encoding on the DS1 line. bit7Stuffing sets bit 7 of every timeslot to a one to guarantee ones's… |
| 1.3.6.1.4.1.562.2.4.1.12.7.10.1.3 | lpDS1ClockingSource | 0 | 0 | This attribute defines the source of the transmit clock for the DS1 line. When local is selected, the crystal on the port generat… |
| 1.3.6.1.4.1.562.2.4.1.12.7.10.1.5 | lpDS1LineLength | 0 | 0 | This attribute defines the line length (in feet) for equalization calculations for the DS1 line. The value ranges between 0-655.… |