This attribute displays whether an AIS (Alarm Indication Signal)
alarm state has been entered. The AIS Alarm state is entered when
AIS defects have been observed and accumulated for 2.5 seconds +/
- 0.5 seconds. An AIS defect is detected after having received less
than 3 zeros in a 2048 bit period (for 8pDS1Atm cards: when both
an Out Of Frame condition exists and a 1's density of at least 99.9%
is present for a time T, where 3 ms T 75 ms; for 8pE1Atm
cards: when both an Out Of Frame condition exists and fewer than
three 0's have been received in 512 bit periods). If the AIS defects
are intermittently occurring, the AIS defect accumulator is
decremented at a rate of 1/10 of the incrementing rate (alarm
integration ratio of 1/10), with all measurements based on a 200 ms
polling cycle.
The port goes into an operational state of disabled for the duration
of an AIS alarm state.
The AIS alarm state is cleared when AIS defects are absent for 10
seconds +/- 0.5 seconds.
Parsed from file nortelPP-logicalProcessorV1_BG00S4C.mib.txt
Company: None
Module: Nortel-Magellan-Passport-LogicalProcessorMIB
This attribute displays whether an AIS (Alarm Indication Signal)
alarm state has been entered. The AIS Alarm state is entered when
AIS defects have been observed and accumulated for 2.5 seconds +/
- 0.5 seconds. An AIS defect is detected after having received less
than 3 zeros in a 2048 bit period (for 8pDS1Atm cards: when both
an Out Of Frame condition exists and a 1's density of at least 99.9%
is present for a time T, where 3 ms T 75 ms; for 8pE1Atm
cards: when both an Out Of Frame condition exists and fewer than
three 0's have been received in 512 bit periods). If the AIS defects
are intermittently occurring, the AIS defect accumulator is
decremented at a rate of 1/10 of the incrementing rate (alarm
integration ratio of 1/10), with all measurements based on a 200 ms
polling cycle.
The port goes into an operational state of disabled for the duration
of an AIS alarm state.
The AIS alarm state is cleared when AIS defects are absent for 10
seconds +/- 0.5 seconds.
Parsed from file Nortel-Magellan-Passport-LogicalProcessorMIB.mib
Module: Nortel-Magellan-Passport-LogicalProcessorMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-Magellan-Passport-LogicalProcessorMIB
[Automatically extracted from oidview.com]
lpDS1RxAisAlarm OBJECT-TYPE SYNTAX INTEGER { on(0), off(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays whether an AIS (Alarm Indication Signal) alarm state has been entered. The AIS Alarm state is entered when AIS defects have been observed and accumulated for 2.5 seconds +/ - 0.5 seconds. An AIS defect is detected after having received less than 3 zeros in a 2048 bit period (for 8pDS1Atm cards: when both an Out Of Frame condition exists and a 1's density of at least 99.9% is present for a time T, where 3 ms T 75 ms; for 8pE1Atm cards: when both an Out Of Frame condition exists and fewer than three 0's have been received in 512 bit periods). If the AIS defects are intermittently occurring, the AIS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The port goes into an operational state of disabled for the duration of an AIS alarm state. The AIS alarm state is cleared when AIS defects are absent for 10 seconds +/- 0.5 seconds." DEFVAL { off } ::= { lpDS1OperEntry 2 }
lpDS1RxAisAlarm OBJECT-TYPE SYNTAX INTEGER { on(0), off(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays whether an AIS (Alarm Indication Signal) alarm state has been entered. The AIS Alarm state is entered when AIS defects have been observed and accumulated for 2.5 seconds +/ - 0.5 seconds. An AIS defect is detected after having received less than 3 zeros in a 2048 bit period (for 8pDS1Atm cards: when both an Out Of Frame condition exists and a 1's density of at least 99.9% is present for a time T, where 3 ms T 75 ms; for 8pE1Atm cards: when both an Out Of Frame condition exists and fewer than three 0's have been received in 512 bit periods). If the AIS defects are intermittently occurring, the AIS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The port goes into an operational state of disabled for the duration of an AIS alarm state. The AIS alarm state is cleared when AIS defects are absent for 10 seconds +/- 0.5 seconds." DEFVAL { off } ::= { lpDS1OperEntry 2 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.12.7.16.1.1 | lpDS1LosAlarm | 0 | 0 | This attribute displays whether a LOS (Loss of Signal) alarm state has been entered. A LOS alarm is declared after LOS defects h… |
| 1.3.6.1.4.1.562.2.4.1.12.7.16.1.3 | lpDS1LofAlarm | 0 | 0 | This attribute displays whether a LOF (Loss of Frame) alarm state has been entered. The LOF alarm state is entered when LOF defe… |
| 1.3.6.1.4.1.562.2.4.1.12.7.16.1.4 | lpDS1RxRaiAlarm | 0 | 0 | This attribute displays whether an RAI (Remote Alarm Indication) alarm state has been entered. An RAI alarm state is entered whe… |
| 1.3.6.1.4.1.562.2.4.1.12.7.16.1.5 | lpDS1TxAisAlarm | 0 | 0 | This attribute displays whether an AIS (Alarm Indication Signal) alarm is being transmitted on the line. An AIS alarm is transmi… |
| 1.3.6.1.4.1.562.2.4.1.12.7.16.1.6 | lpDS1TxRaiAlarm | 0 | 0 | This attribute displays whether a RAI signal is being sent on the outgoing line. The RAI signal is transmitted when the port det… |