This attribute is the type of test to be run. The available test types
include the following:
card test sets up an internal loop on the board and runs a bit error
rate test.
manual test assumes the line is looped back externally and a bit
error rate test is performed.
localLoop test loops back the local modem and performs a bit error
rate test.
remoteLoop test loops back the remote modem (or CSU) and
performs a bit error rate test.
externalLoop test loops back the line to the far end.
payloadLoop test only loops back the payload data received from
the incoming line.
remoteLoopThisTrib loops this particular tributary back at the far
end, using services provided by the parent.
v54RemoteLoop initiates a V.54 Remote Loopback test.
pn127RemoteLoop initiates a PN127 Remote Loopback test.
Note that not all test types are not supported by all function
processors.
Parsed from file nortelPP-logicalProcessorV1_BG00S4C.mib.txt
Company: None
Module: Nortel-Magellan-Passport-LogicalProcessorMIB
This attribute is the type of test to be run. The available test types
include the following:
card test sets up an internal loop on the board and runs a bit error
rate test.
manual test assumes the line is looped back externally and a bit
error rate test is performed.
localLoop test loops back the local modem and performs a bit error
rate test.
remoteLoop test loops back the remote modem (or CSU) and
performs a bit error rate test.
externalLoop test loops back the line to the far end.
payloadLoop test only loops back the payload data received from
the incoming line.
remoteLoopThisTrib loops this particular tributary back at the far
end, using services provided by the parent.
v54RemoteLoop initiates a V.54 Remote Loopback test.
pn127RemoteLoop initiates a PN127 Remote Loopback test.
Note that not all test types are not supported by all function
processors.
Parsed from file Nortel-Magellan-Passport-LogicalProcessorMIB.mib
Module: Nortel-Magellan-Passport-LogicalProcessorMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-Magellan-Passport-LogicalProcessorMIB
[Automatically extracted from oidview.com]
lpDS1TestType OBJECT-TYPE SYNTAX INTEGER { card(0), manual(1), localLoop(2), remoteLoop(3), externalLoop(4), payloadLoop(5), remoteLoopThisTrib(6), v54RemoteLoop(7), pn127RemoteLoop(8) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors." DEFVAL { card } ::= { lpDS1TestSetupEntry 2 }
lpDS1TestType OBJECT-TYPE SYNTAX INTEGER { card(0), manual(1), localLoop(2), remoteLoop(3), externalLoop(4), payloadLoop(5), remoteLoopThisTrib(6), v54RemoteLoop(7), pn127RemoteLoop(8) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors." DEFVAL { card } ::= { lpDS1TestSetupEntry 2 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.12.7.3.11.1.1 | lpDS1TestPurpose | 0 | 0 | This attribute records the purpose of the test so that the test results can be associated and properly analyzed. |
| 1.3.6.1.4.1.562.2.4.1.12.7.3.11.1.3 | lpDS1TestFrmSize | 0 | 0 | This attribute defines the size of the test data frames in number of bytes. |
| 1.3.6.1.4.1.562.2.4.1.12.7.3.11.1.4 | lpDS1TestFrmPatternType | 0 | 0 | This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPa… |
| 1.3.6.1.4.1.562.2.4.1.12.7.3.11.1.5 | lpDS1TestCustomizedPattern | 0 | 0 | This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the… |
| 1.3.6.1.4.1.562.2.4.1.12.7.3.11.1.6 | lpDS1TestDataStartDelay | 0 | 0 | This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the tes… |
| 1.3.6.1.4.1.562.2.4.1.12.7.3.11.1.7 | lpDS1TestDisplayInterval | 0 | 0 | This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed a… |
| 1.3.6.1.4.1.562.2.4.1.12.7.3.11.1.8 | lpDS1TestDuration | 0 | 0 | This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time… |