This attribute specifies the period of time that a Remote Alarm
Indicator (RAI) must be present before declaring an RAI alarm. The
value of auto sets the RAI declare time to the default value for E1
and E1C card types which do not have hardware support for RAI
response. On E1C card types with hardware support, if the value of
auto is set, RAI response is done according to the standards. If auto
is set, the value of the raiClearAlarmTime attribute is ignored and
auto is used. This attribute is for E1 and E1C card types only. For
all other card types, the default value must be used.
VALUES (
0 = auto
)
Parsed from file nortelPP-logicalProcessorV1_BG00S4C.mib.txt
Company: None
Module: Nortel-Magellan-Passport-LogicalProcessorMIB
This attribute specifies the period of time that a Remote Alarm
Indicator (RAI) must be present before declaring an RAI alarm. The
value of auto sets the RAI declare time to the default value for E1
and E1C card types which do not have hardware support for RAI
response. On E1C card types with hardware support, if the value of
auto is set, RAI response is done according to the standards. If auto
is set, the value of the raiClearAlarmTime attribute is ignored and
auto is used. This attribute is for E1 and E1C card types only. For
all other card types, the default value must be used.
VALUES (
0 = auto
)
Parsed from file Nortel-Magellan-Passport-LogicalProcessorMIB.mib
Module: Nortel-Magellan-Passport-LogicalProcessorMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-Magellan-Passport-LogicalProcessorMIB
[Automatically extracted from oidview.com]
lpE1RaiDeclareAlarmTime OBJECT-TYPE SYNTAX Unsigned32 (0 | 1..20000) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the period of time that a Remote Alarm Indicator (RAI) must be present before declaring an RAI alarm. The value of auto sets the RAI declare time to the default value for E1 and E1C card types which do not have hardware support for RAI response. On E1C card types with hardware support, if the value of auto is set, RAI response is done according to the standards. If auto is set, the value of the raiClearAlarmTime attribute is ignored and auto is used. This attribute is for E1 and E1C card types only. For all other card types, the default value must be used. VALUES ( 0 = auto )" DEFVAL { 100 } ::= { lpE1ProvEntry 5 }
lpE1RaiDeclareAlarmTime OBJECT-TYPE SYNTAX Unsigned32 (0 | 1..20000) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the period of time that a Remote Alarm Indicator (RAI) must be present before declaring an RAI alarm. The value of auto sets the RAI declare time to the default value for E1 and E1C card types which do not have hardware support for RAI response. On E1C card types with hardware support, if the value of auto is set, RAI response is done according to the standards. If auto is set, the value of the raiClearAlarmTime attribute is ignored and auto is used. This attribute is for E1 and E1C card types only. For all other card types, the default value must be used. VALUES ( 0 = auto )" DEFVAL { 100 } ::= { lpE1ProvEntry 5 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.12.8.10.1.1 | lpE1LineType | 0 | 0 | This attribute specifies the framing of the E1 line. When cas (channel associated signalling) is selected, timeslot 16 is reserve… |
| 1.3.6.1.4.1.562.2.4.1.12.8.10.1.2 | lpE1ClockingSource | 0 | 0 | This attribute defines the source of the transmit clock for the E1 line. When local is selected, the crystal on the port generate… |
| 1.3.6.1.4.1.562.2.4.1.12.8.10.1.3 | lpE1Crc4Mode | 0 | 0 | This attribute defines whether the CRC-4 checking and generation on the E1 line is enabled or disabled. The default CRC-4 mode i… |
| 1.3.6.1.4.1.562.2.4.1.12.8.10.1.4 | lpE1SendRaiOnAis | 0 | 0 | This attribute defines whether the Remote Alarm Indicator (RAI) will be sent when receiving an AIS alarm. The value is yes by def… |
| 1.3.6.1.4.1.562.2.4.1.12.8.10.1.6 | lpE1RaiClearAlarmTime | 0 | 0 | This attribute specifies the period of time that a Remote Alarm Indicator (RAI) has been absent before clearing an RAI alarm. Th… |