This attribute indicates whether a multiframe LOF (loss of frame)
alarm state is entered. A multiframe LOF alarm state is entered
when a multiframe LOF defect (2 consecutive errors in the
multiframe alignment signal) has been detected and accumulated
for 2.5 seconds +/- 0.5 seconds. If the multiframe LOF defects are
intermittently occurring, the multiframe LOF defect accumulator is
decremented at a rate of 1/10 of the incrementing rate (alarm
integration ratio of 1/10), with all measurements based on a 200 ms
polling cycle.
The alarm is cleared when the defect is not detected for 10 seconds
+/- 0.5 seconds. When the multiframe LOF alarm is on, a
multiframe RAI alarm indicator is transmitted on the line.
The 8pE1Atm card does not support the multiframe LOF alarm.
Parsed from file nortelPP-logicalProcessorV1_BG00S4C.mib.txt
Company: None
Module: Nortel-Magellan-Passport-LogicalProcessorMIB
This attribute indicates whether a multiframe LOF (loss of frame)
alarm state is entered. A multiframe LOF alarm state is entered
when a multiframe LOF defect (2 consecutive errors in the
multiframe alignment signal) has been detected and accumulated
for 2.5 seconds +/- 0.5 seconds. If the multiframe LOF defects are
intermittently occurring, the multiframe LOF defect accumulator is
decremented at a rate of 1/10 of the incrementing rate (alarm
integration ratio of 1/10), with all measurements based on a 200 ms
polling cycle.
The alarm is cleared when the defect is not detected for 10 seconds
+/- 0.5 seconds. When the multiframe LOF alarm is on, a
multiframe RAI alarm indicator is transmitted on the line.
The 8pE1Atm card does not support the multiframe LOF alarm.
Parsed from file Nortel-Magellan-Passport-LogicalProcessorMIB.mib
Module: Nortel-Magellan-Passport-LogicalProcessorMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-Magellan-Passport-LogicalProcessorMIB
[Automatically extracted from oidview.com]
lpE1MultifrmLofAlarm OBJECT-TYPE SYNTAX INTEGER { on(0), off(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates whether a multiframe LOF (loss of frame) alarm state is entered. A multiframe LOF alarm state is entered when a multiframe LOF defect (2 consecutive errors in the multiframe alignment signal) has been detected and accumulated for 2.5 seconds +/- 0.5 seconds. If the multiframe LOF defects are intermittently occurring, the multiframe LOF defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The alarm is cleared when the defect is not detected for 10 seconds +/- 0.5 seconds. When the multiframe LOF alarm is on, a multiframe RAI alarm indicator is transmitted on the line. The 8pE1Atm card does not support the multiframe LOF alarm." DEFVAL { off } ::= { lpE1E1OperEntry 1 }
lpE1MultifrmLofAlarm OBJECT-TYPE SYNTAX INTEGER { on(0), off(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates whether a multiframe LOF (loss of frame) alarm state is entered. A multiframe LOF alarm state is entered when a multiframe LOF defect (2 consecutive errors in the multiframe alignment signal) has been detected and accumulated for 2.5 seconds +/- 0.5 seconds. If the multiframe LOF defects are intermittently occurring, the multiframe LOF defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The alarm is cleared when the defect is not detected for 10 seconds +/- 0.5 seconds. When the multiframe LOF alarm is on, a multiframe RAI alarm indicator is transmitted on the line. The 8pE1Atm card does not support the multiframe LOF alarm." DEFVAL { off } ::= { lpE1E1OperEntry 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.12.8.17.1.2 | lpE1RxMultifrmRaiAlarm | 0 | 0 | This attribute displays whether a multiframe RAI (remote alarm indicator) alarm state has been entered. A multiframe RAI alarm st… |
| 1.3.6.1.4.1.562.2.4.1.12.8.17.1.3 | lpE1TxMultifrmRaiAlarm | 0 | 0 | This attribute displays whether a multiframe RAI (remote alarm indicator) alarm is being sent on the E1 line. This is transmitte… |