This attribute defines the source of synchronization of the outgoing
clocks. This attribute is only used when the actualLinkMode is dce.
If the value of the attribute is local, the outgoing clocks are
synchronized to a local oscillator on the FP.
If the value of the attribute is module, the outgoing clocks are
synchronized to the oscillator on the active CP.
Parsed from file nortelPP-logicalProcessorV1_BG00S4C.mib.txt
Company: None
Module: Nortel-Magellan-Passport-LogicalProcessorMIB
This attribute defines the source of synchronization of the outgoing
clocks. This attribute is only used when the actualLinkMode is dce.
If the value of the attribute is local, the outgoing clocks are
synchronized to a local oscillator on the FP.
If the value of the attribute is module, the outgoing clocks are
synchronized to the oscillator on the active CP.
Parsed from file Nortel-Magellan-Passport-LogicalProcessorMIB.mib
Module: Nortel-Magellan-Passport-LogicalProcessorMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-Magellan-Passport-LogicalProcessorMIB
[Automatically extracted from oidview.com]
lpV35ClockingSource OBJECT-TYPE SYNTAX INTEGER { local(0), module(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute defines the source of synchronization of the outgoing clocks. This attribute is only used when the actualLinkMode is dce. If the value of the attribute is local, the outgoing clocks are synchronized to a local oscillator on the FP. If the value of the attribute is module, the outgoing clocks are synchronized to the oscillator on the active CP." ::= { lpV35ProvEntry 6 }
lpV35ClockingSource OBJECT-TYPE SYNTAX INTEGER { local(0), module(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute defines the source of synchronization of the outgoing clocks. This attribute is only used when the actualLinkMode is dce. If the value of the attribute is local, the outgoing clocks are synchronized to a local oscillator on the FP. If the value of the attribute is module, the outgoing clocks are synchronized to the oscillator on the active CP." ::= { lpV35ProvEntry 6 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.12.9.10.1.1 | lpV35LinkMode | 0 | 0 | This attribute defines the intended gender of the V.35 interface. The actual gender of the interface is determined by the physic… |
| 1.3.6.1.4.1.562.2.4.1.12.9.10.1.2 | lpV35ReadyLineState | 0 | 0 | This attribute specifies the line signals originating from the V.35 interface that will always be turned on, provided the interf… |
| 1.3.6.1.4.1.562.2.4.1.12.9.10.1.3 | lpV35DataTransferLineState | 0 | 0 | This attribute specifies the line signals required to indicate that the external equipment is in a good state (that is, data tra… |
| 1.3.6.1.4.1.562.2.4.1.12.9.10.1.4 | lpV35LineStatusTimeOut | 0 | 0 | This attribute defines the time that the line state must be stable (good or bad) before a line state change is declared. |
| 1.3.6.1.4.1.562.2.4.1.12.9.10.1.5 | lpV35LineSpeed | 0 | 0 | This attribute defines the speed of the line for source clocking. This attribute is ignored if the interface is not providing a … |
| 1.3.6.1.4.1.562.2.4.1.12.9.10.1.7 | lpV35DteDataClockSource | 0 | 0 | This attribute is only used when the actualLinkMode is dce. It is used to determine the clock to be used to recover the receive… |
| 1.3.6.1.4.1.562.2.4.1.12.9.10.1.8 | lpV35ApplicationFramerName | 0 | 0 | This attribute contains the component name of a Framer which is associated with the V35 component. |
| 1.3.6.1.4.1.562.2.4.1.12.9.10.1.9 | lpV35EnableDynamicSpeed | 0 | 0 | When set to yes, this attribute specifies that the transmit link speed should be set to the calculated receiver link speed. This… |