This attribute indicates the calculated bit error rate on the link. Test
data are generated and sent in frames of a preset size (frameSize).
The Test component tries to estimate the number of bit errors in any
errored frame which is identifiable. The statistics are updated
accordingly. A lost frame (possibly due to an error on the flag
sequence) is not used for the bit error rate calculation. The result is
presented in the form of xEsyy, where x is the mantissa; and syy is
the exponent, for example 0E+00, 2E-09.
Note that the bitErrorRate is an estimate only. For more reliable test
results, the test should be done over a long period. Multiple tests
would also improve the confidence level of the test results.
This attribute is not displayed for ATM cards because the physical
layer drops all errored frames at the controller interface.
Parsed from file nortelPP-logicalProcessorV1_BG00S4C.mib.txt
Company: None
Module: Nortel-Magellan-Passport-LogicalProcessorMIB
This attribute indicates the calculated bit error rate on the link. Test
data are generated and sent in frames of a preset size (frameSize).
The Test component tries to estimate the number of bit errors in any
errored frame which is identifiable. The statistics are updated
accordingly. A lost frame (possibly due to an error on the flag
sequence) is not used for the bit error rate calculation. The result is
presented in the form of xEsyy, where x is the mantissa; and syy is
the exponent, for example 0E+00, 2E-09.
Note that the bitErrorRate is an estimate only. For more reliable test
results, the test should be done over a long period. Multiple tests
would also improve the confidence level of the test results.
This attribute is not displayed for ATM cards because the physical
layer drops all errored frames at the controller interface.
Parsed from file Nortel-Magellan-Passport-LogicalProcessorMIB.mib
Module: Nortel-Magellan-Passport-LogicalProcessorMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-Magellan-Passport-LogicalProcessorMIB
[Automatically extracted from oidview.com]
lpV35TestBitErrorRate OBJECT-TYPE SYNTAX AsciiString (SIZE (5)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component tries to estimate the number of bit errors in any errored frame which is identifiable. The statistics are updated accordingly. A lost frame (possibly due to an error on the flag sequence) is not used for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa; and syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface." ::= { lpV35TestResultsEntry 11 }
lpV35TestBitErrorRate OBJECT-TYPE SYNTAX AsciiString (SIZE (5)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component tries to estimate the number of bit errors in any errored frame which is identifiable. The statistics are updated accordingly. A lost frame (possibly due to an error on the flag sequence) is not used for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa; and syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface." ::= { lpV35TestResultsEntry 11 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.12.9.2.12.1.1 | lpV35TestElapsedTime | 0 | 0 | This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the ti… |
| 1.3.6.1.4.1.562.2.4.1.12.9.2.12.1.2 | lpV35TestTimeRemaining | 0 | 0 | This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute. |
| 1.3.6.1.4.1.562.2.4.1.12.9.2.12.1.3 | lpV35TestCauseOfTermination | 0 | 0 | lpV35TestCauseOftermination |
| 1.3.6.1.4.1.562.2.4.1.12.9.2.12.1.4 | lpV35TestBitsTx | 0 | 0 | This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is l… |
| 1.3.6.1.4.1.562.2.4.1.12.9.2.12.1.5 | lpV35TestBytesTx | 0 | 0 | This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value. |
| 1.3.6.1.4.1.562.2.4.1.12.9.2.12.1.6 | lpV35TestFrmTx | 0 | 0 | This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum valu… |
| 1.3.6.1.4.1.562.2.4.1.12.9.2.12.1.7 | lpV35TestBitsRx | 0 | 0 | This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum va… |
| 1.3.6.1.4.1.562.2.4.1.12.9.2.12.1.8 | lpV35TestBytesRx | 0 | 0 | This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum v… |
| 1.3.6.1.4.1.562.2.4.1.12.9.2.12.1.9 | lpV35TestFrmRx | 0 | 0 | This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum … |
| 1.3.6.1.4.1.562.2.4.1.12.9.2.12.1.10 | lpV35TestErroredFrmRx | 0 | 0 | This attribute counts the errored frames received during the test period. This counter is not expected to reach its maximum valu… |