This attribute counts the number of times a Q.933 protocol error has
occurred. Any one of the following events constitutes a protocol
error:
1. In the user-signaled Link Layer Core Parameters IE within the
SETUP or CONNECT messages, Cir, Bc and Be are all zero;
2. In the user-signaled Link Layer Core Parameters IE within the
SETUP or CONNECT messages, Cir is zero but Bc is
non-zero, or Bc is zero but Cir is non-zero;
3. In the user-signaled Link Layer Core Parameters IE within the
SETUP or CONNECT messages, the minimum acceptable Cir
is greater than Cir;
4. At the destination end, any of the destination to source direction
link layer core parameters has been increased in the
CONNECT message from the called user;
5. At the destination end, the destination to source direction Cir
in the CONNECT message is smaller than the corresponding
minimum acceptable Cir signaled to the called user;
6. At the source end, any of the source to destination direction
link layer core parameters in the CONNECT message from the
destination end has been increased;
7. At the source end, the source to destination direction Cir, after
negotiation, is smaller than the corresponding minimum
acceptable Cir;
8. The network has received a STATUS message from the user
with an incompatible Q.933 state.
When this count reaches maximum, it wraps to zero.
Parsed from file nortelPP-mpaNetworkLinkV1_BG00S4C.mib.txt
Company: None
Module: Nortel-Magellan-Passport-MpaNetworkLinkMIB
This attribute counts the number of times a Q.933 protocol error has
occurred. Any one of the following events constitutes a protocol
error:
1. In the user-signaled Link Layer Core Parameters IE within the
SETUP or CONNECT messages, Cir, Bc and Be are all zero;
2. In the user-signaled Link Layer Core Parameters IE within the
SETUP or CONNECT messages, Cir is zero but Bc is
non-zero, or Bc is zero but Cir is non-zero;
3. In the user-signaled Link Layer Core Parameters IE within the
SETUP or CONNECT messages, the minimum acceptable Cir
is greater than Cir;
4. At the destination end, any of the destination to source direction
link layer core parameters has been increased in the
CONNECT message from the called user;
5. At the destination end, the destination to source direction Cir
in the CONNECT message is smaller than the corresponding
minimum acceptable Cir signaled to the called user;
6. At the source end, any of the source to destination direction
link layer core parameters in the CONNECT message from the
destination end has been increased;
7. At the source end, the source to destination direction Cir, after
negotiation, is smaller than the corresponding minimum
acceptable Cir;
8. The network has received a STATUS message from the user
with an incompatible Q.933 state.
When this count reaches maximum, it wraps to zero.
Parsed from file Nortel-Magellan-Passport-MpaNetworkLinkMIB.mib
Module: Nortel-Magellan-Passport-MpaNetworkLinkMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-Magellan-Passport-MpaNetworkLinkMIB
[Automatically extracted from oidview.com]
mpanlSigProtocolErrors OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of times a Q.933 protocol error has occurred. Any one of the following events constitutes a protocol error: 1. In the user-signaled Link Layer Core Parameters IE within the SETUP or CONNECT messages, Cir, Bc and Be are all zero; 2. In the user-signaled Link Layer Core Parameters IE within the SETUP or CONNECT messages, Cir is zero but Bc is non-zero, or Bc is zero but Cir is non-zero; 3. In the user-signaled Link Layer Core Parameters IE within the SETUP or CONNECT messages, the minimum acceptable Cir is greater than Cir; 4. At the destination end, any of the destination to source direction link layer core parameters has been increased in the CONNECT message from the called user; 5. At the destination end, the destination to source direction Cir in the CONNECT message is smaller than the corresponding minimum acceptable Cir signaled to the called user; 6. At the source end, any of the source to destination direction link layer core parameters in the CONNECT message from the destination end has been increased; 7. At the source end, the source to destination direction Cir, after negotiation, is smaller than the corresponding minimum acceptable Cir; 8. The network has received a STATUS message from the user with an incompatible Q.933 state. When this count reaches maximum, it wraps to zero." ::= { mpanlSigStatsEntry 8 }
mpanlSigProtocolErrors OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of times a Q.933 protocol error has occurred. Any one of the following events constitutes a protocol error: 1. In the user-signaled Link Layer Core Parameters IE within the SETUP or CONNECT messages, Cir, Bc and Be are all zero; 2. In the user-signaled Link Layer Core Parameters IE within the SETUP or CONNECT messages, Cir is zero but Bc is non-zero, or Bc is zero but Cir is non-zero; 3. In the user-signaled Link Layer Core Parameters IE within the SETUP or CONNECT messages, the minimum acceptable Cir is greater than Cir; 4. At the destination end, any of the destination to source direction link layer core parameters has been increased in the CONNECT message from the called user; 5. At the destination end, the destination to source direction Cir in the CONNECT message is smaller than the corresponding minimum acceptable Cir signaled to the called user; 6. At the source end, any of the source to destination direction link layer core parameters in the CONNECT message from the destination end has been increased; 7. At the source end, the source to destination direction Cir, after negotiation, is smaller than the corresponding minimum acceptable Cir; 8. The network has received a STATUS message from the user with an incompatible Q.933 state. When this count reaches maximum, it wraps to zero." ::= { mpanlSigStatsEntry 8 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.123.6.17.1.1 | mpanlSigCurrentNumberOfSvcCalls | 0 | 0 | This attribute shows the number of Frame Relay SVCs currently existing on this interface. |
| 1.3.6.1.4.1.562.2.4.1.123.6.17.1.4 | mpanlSigInCalls | 0 | 0 | This attribute indicates the current number of incoming SVCs on this interface (that is, the number of SVCs for which this inte… |
| 1.3.6.1.4.1.562.2.4.1.123.6.17.1.5 | mpanlSigInCallsRefused | 0 | 0 | This attribute counts the number of incoming SVC call requests that are rejected by either this interface or by the called user.… |
| 1.3.6.1.4.1.562.2.4.1.123.6.17.1.6 | mpanlSigOutCalls | 0 | 0 | This attribute shows the current number of outgoing SVCs on this interface (that is, the number of SVCs for which this interfac… |
| 1.3.6.1.4.1.562.2.4.1.123.6.17.1.7 | mpanlSigOutCallsFailed | 0 | 0 | This attribute counts the number of outgoing SVC call requests that are rejected by either this interface, or by the network sid… |
| 1.3.6.1.4.1.562.2.4.1.123.6.17.1.9 | mpanlSigQualityOfServiceNotAvailable | 0 | 0 | This attribute counts the number of incoming and outgoing SVCs that are rejected because the quality of service requested cannot… |
| 1.3.6.1.4.1.562.2.4.1.123.6.17.1.10 | mpanlSigSetupTimeout | 0 | 0 | This attribute counts the number of times the T303 setup timer has expired. When this count reaches maximum, it wraps to zero. |
| 1.3.6.1.4.1.562.2.4.1.123.6.17.1.11 | mpanlSigLastCauseInStatusMsgReceived | 0 | 0 | This attribute shows the cause value in the last received user's STATUS message to an existing call. The DLCI to which this STATU… |
| 1.3.6.1.4.1.562.2.4.1.123.6.17.1.12 | mpanlSigLastStateInStatusMsgReceived | 0 | 0 | This attribute shows the state value in the last received user's STATUS message to an existing call. The DLCI to which this STATU… |
| 1.3.6.1.4.1.562.2.4.1.123.6.17.1.13 | mpanlSigLastDlciReceivedStatus | 0 | 0 | This attribute shows the value of the DLCI that has most recently received a STATUS message from the user. The initial value of … |
| 1.3.6.1.4.1.562.2.4.1.123.6.17.1.14 | mpanlSigLastQ933StateReceivedStatus | 0 | 0 | This attribute shows the network Q.933 state of the DLCI that has most recently received a STATUS message from the user. The DLC… |
| 1.3.6.1.4.1.562.2.4.1.123.6.17.1.15 | mpanlSigLastTimeMsgBlockCongested | 0 | 0 | This attribute displays the most recent time that an SVC DLCI has failed to get a message block due to message block congestion.… |
| 1.3.6.1.4.1.562.2.4.1.123.6.17.1.16 | mpanlSigLastDlciWithMsgBlockCongestion | 0 | 0 | This attribute shows the value of the DLCI that has most recently failed to get a message block due to message block congestion.… |