This attribute indicates whether the fax data modem is in receive or
transmit mode. If this is not a fax data modem call, then the value is
set to notApplicable. Valid values are:
notApplicable, Not an applicable field.
rxOnTxOff, Receiver is on, transmitter is off.
rxOffTxOn, Receiver is off, transmitter is on.
rxTxOn, Reciever is on, transmitter is on.
Parsed from file nortelPP-gsmIwfV1_BG00S4C.mib.txt
Company: None
Module: Nortel-Magellan-Passport-GsmIwfMIB
This attribute indicates whether the fax data modem is in receive or
transmit mode. If this is not a fax data modem call, then the value is
set to notApplicable. Valid values are:
notApplicable, Not an applicable field.
rxOnTxOff, Receiver is on, transmitter is off.
rxOffTxOn, Receiver is off, transmitter is on.
rxTxOn, Reciever is on, transmitter is on.
Parsed from file Nortel-Magellan-Passport-GsmIwfMIB.mib
Module: Nortel-Magellan-Passport-GsmIwfMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-Magellan-Passport-GsmIwfMIB
[Automatically extracted from oidview.com]
gsmBcModemReceiverTransmitter OBJECT-TYPE SYNTAX INTEGER { notApplicable(0), rxOnTxOff(1), rxOffTxOn(2), rxTxOn(3) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates whether the fax data modem is in receive or transmit mode. If this is not a fax data modem call, then the value is set to notApplicable. Valid values are: notApplicable, Not an applicable field. rxOnTxOff, Receiver is on, transmitter is off. rxOffTxOn, Receiver is off, transmitter is on. rxTxOn, Reciever is on, transmitter is on." DEFVAL { notApplicable } ::= { gsmBcModemOperEntry 5 }
gsmBcModemReceiverTransmitter OBJECT-TYPE SYNTAX INTEGER { notApplicable(0), rxOnTxOff(1), rxOffTxOn(2), rxTxOn(3) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates whether the fax data modem is in receive or transmit mode. If this is not a fax data modem call, then the value is set to notApplicable. Valid values are: notApplicable, Not an applicable field. rxOnTxOff, Receiver is on, transmitter is off. rxOffTxOn, Receiver is off, transmitter is on. rxTxOn, Reciever is on, transmitter is on." DEFVAL { notApplicable } ::= { gsmBcModemOperEntry 5 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.562.2.4.1.128.4.10.1.2 | gsmBcModemRate | 0 | 0 | This attribute indicates the transmission rate of the current modem in use. A rate of 1200_75 is 75 bit/s in the transmit direct… |
1.3.6.1.4.1.562.2.4.1.128.4.10.1.3 | gsmBcModemAlgorithmInUse | 0 | 0 | This attribute indicates the current modem algorithm(s) active for the channel. Valid values are: v17, V.17 is active.V.17 is an … |
1.3.6.1.4.1.562.2.4.1.128.4.10.1.4 | gsmBcModemProtocolState | 0 | 0 | This attribute indicates the active protocol state of the modem in use.Valid values are: idle, Modem is in an inactive state and … |
1.3.6.1.4.1.562.2.4.1.128.4.10.1.6 | gsmBcModemTraining | 0 | 0 | This attribute indicates the training procedure used by the V.17 modems. ITU-T defines two training procedures. A longer trainin… |
1.3.6.1.4.1.562.2.4.1.128.4.10.1.8 | gsmBcModemToUpperFlowControlActive | 0 | 0 | This attribute indicates whether flow control was requested and an indication was sent to an upper layer protocol. |
1.3.6.1.4.1.562.2.4.1.128.4.10.1.9 | gsmBcModemToDspFlowControlActive | 0 | 0 | This attribute indicates whether an upper layer protocol requested flow control and an indication was sent to the Digital Signal… |
1.3.6.1.4.1.562.2.4.1.128.4.10.1.10 | gsmBcModemAsyncMode | 0 | 0 | This attribute indicates whether conversion between synchronous and asynchronous data format (specifacally, the stripping or inse… |
1.3.6.1.4.1.562.2.4.1.128.4.10.1.11 | gsmBcModemAutoHdlcMode | 0 | 0 | This attribute indicates whether High-Level Data Link Control (HDLC) functions are being performed by the modem to support HDLC a… |
1.3.6.1.4.1.562.2.4.1.128.4.10.1.12 | gsmBcModemOutbandFlowControl | 0 | 0 | This attribute indicates whether inband or outband flow control conversions are being performed. The modem performs either inband… |
1.3.6.1.4.1.562.2.4.1.128.4.10.1.13 | gsmBcModemOutbandBreak | 0 | 0 | This attribute indicates whether inband or outband break control conversions are being performed. This is when the modem detects… |
1.3.6.1.4.1.562.2.4.1.128.4.10.1.14 | gsmBcModemAutobaud | 0 | 0 | This attribute indicates whether autobaud is active. The modem is instructed at call setup time by the MSC on: What is the initia… |